1. Power Consumption: 90
2. Input Voltage: AC 120-277V
3. Luminous Flux: 7995lm
4. CCT: Pure White 4700-5300K
5. Finishing: Gray
90W Artemis Series Flood Light
■ Aluminum alloy, high corrosion resistance and weather-resistance ■ Built-in chimney effect thermal management system with self-cleaning effect and reliable performance. ■ Patented removable-module design for power variation. ■ Mounting bracket with marker for angle adjustment
₦175,000.00
CompareBased on 0 reviews
Be the first to review “90W Artemis Series Flood Light”
-
CIRCUIT BREAKERS
TeSys Schneider Electric Overload Relays 1.6 – 2.5amps
3-pole relays with screw clamp terminals
These overload relays are designed for the protection of motors. They are
compensated and phase failure sensitive. Resetting can either be manual or
automatic.
Direct mounting: under the contactor for versions with screw clamp terminals only;
pre-wired terminals, see pages B11/28 and B11/30.
Separate mounting: using terminal block LA7 K0064 (see below).
On the front face of the overload relay:
b selection of reset mode: Manual (marked H) or Automatic (marked A),
b red pushbutton: Trip Test function,
b blue pushbutton: Stop and manual Reset,
b yellow trip flag indicator: overload relay tripped.
Protection by magnetic circuit breaker GV2 LE, see pages A6/11 and A6/20.SKU: Overload3 -
ARMOURED CABLE, ELECTRICAL INDUSTRIAL
70mm x 4Core Amroured Cable (Kablemetal Nexans Nigeria)
70mm 4 Core Armoured Cable is a size and type of steel wire armoured cable. Primarily found in large powered networks and underneath roadways supplying mains electricity to large buildings. It can also be found within the transport industry, specifically railways powering the trains and buildings located beside the tracks. Due to the size of this cable, it is perfectly suitable for large amounts of power running through it on a daily basis, 24 hours a day.
The best solution to this issue would be to buy a length of earth cable that matches the length of the Armoured Cable. This would negate the steel wire from being used as an earth, meaning it is a safer alternative.
70mm 4 Core Armoured Cable is constructed from the following materials;
– Plain Annealed Stranded Copper for the cores
– Cross-Linked Polyethylene for the Insulation
– PVC (Polyvinyl Chloride) for the bedding and sheathing
– Steel Wire for the armour protecting the insulating layers beneath.
No. of cores / size of cable – 4
Approx overall diameter – 36.8mm
Approx weight (m) – 4.23Kg
Conductors – Plain Annealed Stranded Copper
Insulation – Cross-Linked Polyethylene
Bedding – Polyvinyl Chloride
Armour / Protection – Steel Wire
Sheath / Jacket – Polyvinyl Chloride
Colour – Black
Application – Primarily found in large powered networks as well as buried underneath roads supplying mains electricity to large buildings etc.
Voltage Rating – 600/1000VtSKU: 1521 -
ELECTRICAL FITTINGS, Electro, MODULAR FITTING
4x36W 600×600 Recessed Modular Prismatic
Modular Fitting has an extremely small recess depth 53mm which makes it perfect for shallow ceiling voids. It is also suitable for lay in suspended grid ceilings and comes complete with wire retention safety cable. Rapid installation and maintenance are further facilitated by a quick release louvre device, which is particularly useful during potentially disruptive lamp changes. Ivy Classic is also supplied with a peel off protective cover, to keep the luminaire bright, clean and dust free during carriage and installation.
Once in place, Modular Fitting offers bright, glare free lighting courtesy of its brilliant aluminum louvre and either its 4 x 14W or 3 x 14W T5 lamps. This efficient combination of source and reflector offers a high light output ratio (LOR) of up to 78% and more.
SKU: 057 -
CHANGEOVER SWITCHES, Electro, GEAR SWITCHES & CHANGEOVER
Standard 63Amps Changeover Switch
Features:
DMC terminal blocks are provided for cable termination having excellent mechanical, thermal and dielectric properties.
Side Handle Operation.
The enclosure is made of sheet steel suitable for individual mounting.
Terminals suitable for both Al. & Cu conductors.
Adequate knockouts provided for entry of cables.
Door interlocking facility provided.
mounting holes for switch ratings upto 320A and mounting brackets
for switch rating of 400A and above.SKU: Standard63 -
Electro, ENERGY SAVING BULBS, LIGHT BULBS, LIGHTING
Philips E27(Screw) 8W Energy Saving Bulb Philip
Enjoy super savings for 10 years with Philips’ smallest energy saving stick. This little energy saver will pay for itself within the first year and continue to reduce your bills for subsequent years after. Its small size makes it versatile enough to fit into any fitting where you need extra bright light in the home. It has a high energy efficiency rating (European energy efficiency labelling class A).
SKU: 778
There are no reviews yet.