ABB’s change-over and transfer switches are designed to transfer loads from one power source to another in a wide variety of applications. The range includes switches from 16 to 3200 Amperes, which can be operated manually, remotely by using a motor or automatically. The most compact solution With an advanced and compact design, ABB’s change-over and transfer switches can be installed in confined spaces Superior performance: ABB’s change-over and transfer switches are tested according to IEC 60947-6-1 and IEC 60947-3 standards. The switches have ratings in AC31 and AC33 utilization categories, up to 415 V. In motorized switches, the motor operators have a wide voltage operation range Suitable for your application Safe operation: Service continuity is ensured with a number of built-in, integrated safety features. For instance, the change-over mechanism has stable positions shown reliably. Unwanted manual and remote operation can be prevented. Manual operation is always possible in emergency situations.
ABB Gear Switch 32A TPN
With ABB’s change-over switches, people and equipment are safe
Easy and flexible installation
Depending on the size, the switch can be mounted in different positions, on the panel door or DIN rail. Snap-on accessories and connections are available.
• IP65 rated (not suitable for external installation) Steel Enclosure
• Powder coated textured finish (RAL 7035)
• All switches are supplied with fuses and removable gland plates
• All 3 pole switches include detachable neutral link (OT160 solid link)
• Hinged lid complete with lock
• Switch Fuses are internally rated IP20 on incoming terminals up to 63A
• Pad lockable pistol grip handle as standard • Switch Fuses 100A are supplied with incoming terminal shrouds not fitted to allow customer connections
₦174,000.00
CompareBased on 0 reviews
Be the first to review “ABB Gear Switch 32A TPN”
-
CIRCUIT BREAKERS
TeSys Schneider Electric Overload Relays 2.3-4amps
3-pole relays with screw clamp terminals
These overload relays are designed for the protection of motors. They are
compensated and phase failure sensitive. Resetting can either be manual or
automatic.
Direct mounting: under the contactor for versions with screw clamp terminals only;
pre-wired terminals, see pages B11/28 and B11/30.
Separate mounting: using terminal block LA7 K0064 (see below).
On the front face of the overload relay:
b selection of reset mode: Manual (marked H) or Automatic (marked A),
b red pushbutton: Trip Test function,
b blue pushbutton: Stop and manual Reset,
b yellow trip flag indicator: overload relay tripped.
Protection by magnetic circuit breaker GV2 LE, see pages A6/11 and A6/20.SKU: Overload2 -
CHANGEOVER SWITCHES, Electro, GEAR SWITCHES & CHANGEOVER
Standard 200Amps Changeover Switch
Features:
DMC terminal blocks are provided for cable termination having excellent mechanical, thermal and dielectric properties.
Side Handle Operation.
The enclosure is made of sheet steel suitable for individual mounting.
Terminals suitable for both Al. & Cu conductors.
Adequate knockouts provided for entry of cables.
Door interlocking facility provided.
mounting holes for switch ratings upto 320A and mounting brackets
for switch rating of 400A and above.SKU: Standard200 -
CABLE AND CABLE MANAGEMENT, Electro, SINGLE CORE WIRE
Coleman cable 10 mm Wire & Cable – Black
Coleman offers a wide range of products certified by Nigerian Industrial Standard (NIS) and the Standards Organisation of Nigeria (SON). (ISO 9001/2000 and ISO 14001 SON SGS CE standard and British standards to make sure our electrical are safe for use at home or offices etc and our brands of wires and cable can be used for power supply and general wiring in a vast range of low voltage (LV), medium voltage (MV) and high voltage (HV).
SKU: 01399 -
MOTOR STARTER
Three Phase Motor Starter 12-18A
General Description:
Motor starter are suitable for 50Hz or 60Hz, rated voltage up to 660V, current up to 95A circuit. In order to protect motor starting, accelerating the motor to rated rev, against overload operation and artificially breaking the circuit of protected motor.
Structure Feature:
1. Sealed: Plastic box LE1-D09~D32 and iron box platstic coated LE1-D40~D95, protection up to IP65;
2. Operation system with manual “START” and “STOP” buttons. With thermal overload relay consisting a inversable starter;
3. Install different accessories derive many kinds of other products;
4. Select LC1-D contactor with standard 35mm rail, which can be fixed directly at the base of starter. Wires extracted from the three phase of the thermal overload relay can be inserted the three phase main contacts of the contactor, easy assembly and connection.SKU: 1498
There are no reviews yet.