Line circuit breaker in accordance with DIN VDE 0641 part 11, 3-pole 230/400 V/AC.
Technical data
Content 1 pc(s)
Operating voltage 230/400 Vac
Number of pins 3
Nominal current 25 A
Category Circuit breaker
Type 25 A
Release characteristics C/6kA
ABB LS S203-C25 CIRCUIT BREAKER
Read the Instruction
₦28,000.00
CompareBased on 0 reviews
Be the first to review “ABB LS S203-C25 CIRCUIT BREAKER”
-
ELECTRICAL INDUSTRIAL, Electro, TRANSFORMER
ABB 200KVA 11/400KV Distribution Transformer
Distribution transformers are typically oil-immersed and suitable for pole-, pad- or ground-mounting. They represent an economical option for certain networks, particularly those with low population densities.
Depending upon requirements, transformers may be connected between two phases of a three-phase system (two high voltage bushings) or from one phase to ground (single high voltage bushing).
The units are suitable for residential overhead distribution loads, as well as light commercial or industrial loads and diversified power applications.
Product scope
- Primary voltage: up to 36 kV
- Typical fluid: mineral oil
SKU: transfor200kva -
ARMOURED CABLE, ELECTRICAL INDUSTRIAL
185mm x 4Core Armoured Cable (Nigerchin Cable and Wire)/Per meter
ARMOURED CABLE, ELECTRICAL INDUSTRIAL185mm x 4Core Armoured Cable (Nigerchin Cable and Wire)/Per meter
185mm 4 Core Armoured Cable is a size and type of steel wire armoured cable. Primarily found in large powered networks and underneath roadways supplying mains electricity to large buildings. It can also be found within the transport industry, specifically railways powering the trains and buildings located beside the tracks. Due to the size of this cable, it is perfectly suitable for large amounts of power running through it on a daily basis, 24 hours a day.
The best solution to this issue would be to buy a length of earth cable that matches the length of the Armoured Cable. This would negate the steel wire from being used as an earth, meaning it is a safer alternative.
185mm 4 Core Armoured Cable is constructed from the following materials;
– Plain Annealed Stranded Copper for the cores
– Cross-Linked Polyethylene for the Insulation
– PVC (Polyvinyl Chloride) for the bedding and sheathing
– Steel Wire for the armour protecting the insulating layers beneath.
– Voltage Rating – 600/1000VtSKU: 185mmnigerchin -
ELECTRICAL INDUSTRIAL, TRANSFORMER
ABB Transformer 300KVA 33/400KV
Distribution transformers are typically oil-immersed and suitable for pole-, pad- or ground-mounting. They represent an economical option for certain networks, particularly those with low population densities.
Depending upon requirements, transformers may be connected between two phases of a three-phase system (two high voltage bushings) or from one phase to ground (single high voltage bushing).
The units are suitable for residential overhead distribution loads, as well as light commercial or industrial loads and diversified power applications.
Product scope
- Primary voltage: 300KV
- Typical fluid: mineral oil
SKU: DTS30033 -
Electro, GEAR SWITCHES, GEAR SWITCHES & CHANGEOVER
MEM – Eaton 200A TPN Gear Switch
The top and bottom endplates are removable. Door can be removed for ease of installation. Incorporate knockouts and gasketed doors, IP41 rated protection. Handle: chromium-plated handles with ON (I) / OFF (O) indication. The switch can be locked ON or OFF by means of a padlock. Internal fixing: enables the unit to be mounted side by side with other units. Maximum current: 200A Number of Poles: 3 Poles. 3 Phase. Switches: quick make-and-break type, suitable for use on AC or DOC. Removable moving contact assemblies: to facilitate wiring. Interiors comprise porcelain bases fitted with non-ferrous conducting components.
SKU: MEM200
There are no reviews yet.