Execution: Single pole, Double pole, Three pole, Four pole, SPN,TPN
Range: 10,15,20,30,40,63,80,100,125 etc Amp
Trip Free mechanism10KA short circuit breaking capacity for B and C Low power consumption,thus cost effective and energy savingFinger safe terminal IP20 degree of protectionDual Terminal Facility15 Plate Arc chute for effective arc quenchingsilver graphite contacts for enhance lifeAccessories switchPerformance and safetyPositive contact indicatorReliability and continuity of serviceSuitable for both DESB and switch boardShort Circuit breaking capacity 3KA MCBProtection against overload and short Circuit breaking capacity 3KA
₦20,000.00
CompareExecution: Single pole, Double pole, Three pole, Four pole, SPN,TPN
Range: 10,15,20,30,40,63,80,100,125 etc Amp
SVS15 monitors the main voltage continously,If the voltage rises or drops, The SVS will stabilise the output to ensure the voltage
reaching your equipment remains constant at 230v,within the operating range of the unit.
3-pole relays with screw clamp terminals
These overload relays are designed for the protection of motors. They are
compensated and phase failure sensitive. Resetting can either be manual or
automatic.
Direct mounting: under the contactor for versions with screw clamp terminals only;
pre-wired terminals, see pages B11/28 and B11/30.
Separate mounting: using terminal block LA7 K0064 (see below).
On the front face of the overload relay:
b selection of reset mode: Manual (marked H) or Automatic (marked A),
b red pushbutton: Trip Test function,
b blue pushbutton: Stop and manual Reset,
b yellow trip flag indicator: overload relay tripped.
Protection by magnetic circuit breaker GV2 LE, see pages A6/11 and A6/20.
Stanley Products always provides new technology for all industrial requirements, with excellent value for their investments. You can depend upon for matchless quality on all Stanley Products. Our new range products in sheet metal Side Handle Operating Changeover are made as per industrial requirements with powder coating.
This certificate of “Stanley” original products, issued with the assurance as the same has been manufactured in accordance with requirement of IEC-60947-3 (2005-06). Quality system, standards and mechanism has been tested satisfactory to the specific test as follows:
1. Dielectric Test
2. Mechanical Operation Test
3. High Voltage Test
4. Insulation Resistance Test
5. Temperature Rise Test
6. Mini Volt Drop Test
STANLEY 800A Changeover
There are no reviews yet.