ABB Transformer 500KVA 11/400KV
Distribution transformers are typically oil-immersed and suitable for pole-, pad- or ground-mounting. They represent an economical option for certain networks, particularly those with low population densities.
Depending upon requirements, transformers may be connected between two phases of a three-phase system (two high voltage bushings) or from one phase to ground (single high voltage bushing).
The units are suitable for residential overhead distribution loads, as well as light commercial or industrial loads and diversified power applications.
Product scope
- Primary voltage: 500kva
- Typical fluid: mineral oil
₦28,888,565.25
Compare-
DISTRIBUTION BOARDS, DISTRIBUTION BOARDS, Electro
Eaton-MEM 6way Three Phase(TPN) Distribution Board C/W MCB
DISTRIBUTION BOARDS, DISTRIBUTION BOARDS, ElectroEaton-MEM 6way Three Phase(TPN) Distribution Board C/W MCB
0 out of 5(0)Features Compact DBs which occupy minimum space Raised neutral link for easy wiring Suitable for surface & fush mounting Detachable din bar with end stoppers for easy assembly of breakers Supplied with fully shielded bus-bars Level marks for providing indication for fitment in wall Supplied with neutral & earth link, top & bottom detachable plates Supplied with masking sheet to protect components from cement during plastering
SKU: 263 -
ELECTRICAL FITTINGS, Electro, MODULAR FITTING
4x36W 600×600 Recessed Modular Prismatic
0 out of 5(0)Modular Fitting has an extremely small recess depth 53mm which makes it perfect for shallow ceiling voids. It is also suitable for lay in suspended grid ceilings and comes complete with wire retention safety cable. Rapid installation and maintenance are further facilitated by a quick release louvre device, which is particularly useful during potentially disruptive lamp changes. Ivy Classic is also supplied with a peel off protective cover, to keep the luminaire bright, clean and dust free during carriage and installation.
Once in place, Modular Fitting offers bright, glare free lighting courtesy of its brilliant aluminum louvre and either its 4 x 14W or 3 x 14W T5 lamps. This efficient combination of source and reflector offers a high light output ratio (LOR) of up to 78% and more.
SKU: 057
Related products
-
Electro, ELECTRICAL INDUSTRIAL, LADDERS
Ladders With Self Supported Trestle
0 out of 5(0)Product Features:
Wide fiberglass channel for grip and extra strength
Aluminum steps reduce overall weight without reducing protection level
D-rung ribbed steps offer flat surface climbing area for effortless climbing
Rung crimped onto stile for robustness and strength
Heavy duty PVC shoes provide greater grip and are non-markingSuited for electrical works:
Maintenance
Installation
Telecom Sectors
Electricity ProvidersSKU: 305 -
Electro, ELECTRICAL INDUSTRIAL, WIRE CABLE TRAY & CABLE LADDER
200mm x 50mm Foreign Wire Merge Cable Tray By 3Meter
Electro, ELECTRICAL INDUSTRIAL, WIRE CABLE TRAY & CABLE LADDER200mm x 50mm Foreign Wire Merge Cable Tray By 3Meter
0 out of 5(0)Cable tray are the most common solution for supporting and routing of cables in an installation.
For this reason, cable tray are available in a variety of sizes and standards, in order to cover the
wide range of applications.Embedded perforations for :
– extra load capacity
– better aeration
– better stability
– better condensation drainage
-50x300mmAlternative perforations for :
– better fixation on the supports
– very useful for cable fixation
-Standard finish GalvanizedSKU: 295 -
Electro, ELECTRICAL INDUSTRIAL, LADDERS
Aluminium 36 Feet Ladder
0 out of 5(0)ladder comes in a vertical or inclined set of rungs or steps. There are two types: rigid ladders that can be leaned against a vertical surface such as a wall, and rope ladders that are hung from the top. The vertical members of a rigid ladder are called stringers or rails (US) or stiles (UK). Rigid ladders are usually portable, but some types are permanently fixed to buildings. They are commonly made of metal, wood, or Fiberglass, but they have been known to be made of tough plastic.
SKU: 303 -
Electro, ARMOURED CABLE, ELECTRICAL INDUSTRIAL
25mm 4 Core Amroured Cable|Per Meter (Kablemetal Nexans Nigeria)
Electro, ARMOURED CABLE, ELECTRICAL INDUSTRIAL25mm 4 Core Amroured Cable|Per Meter (Kablemetal Nexans Nigeria)
0 out of 5(0)25mm 4 Core Armoured Cable is a form of electrical cable that is commonly found carrying mains electricity to power networks, devices and buildings. It can also be found within industries such as railway and transport, as well as on pilons carrying mains electricity to houses and factories.
The construction is commonly identified by the following:-
– Plain Annealed Stranded Copper for the conductors/cores
– Cross-Linked Polyethylene (XLPE) for the insulation
– PVC (Polyvinyl Chloride) for the bedding and sheathing of the cable
– Steel Wire Armour to protect the insulating layers beneath.
No. of cores / size of cable – 4
Approx overall diameter – 26.1mm
Approx weight (m) – 1.9Kg
Armour / Protection – Steel Wire
Sheath / Jacket – PVC
Colour – Black
Voltage Rating – 600/1000VtSKU: 307
There are no reviews yet.