Metallic Delta Cable trays are manufactured for the smooth and easy pulling of cable from one point to another to BS EN 61537:2002. We have designed the best cable trays, by taking care of cable loads and practical site problems. Wherever possible all fitting are made of state of art single piece construction. Slotting Patterns are in such a way that it enables the easy cutting and joining at any point without drilling at site. Design allows greater cable filling capacity and smooth turning at bends.
Delta Cable Tray 200 X 100 X 3mtrs Hot Dip Galvanized
₦88,000.00
CompareBased on 0 reviews
Be the first to review “Delta Cable Tray 200 X 100 X 3mtrs Hot Dip Galvanized” Cancel reply
-
ELECTRICAL FITTINGS, Electro, TRUNCKING
16x16mm Dignity PVC Trunking
0 out of 5(0)The advantages of PVC Wire Duct:
1. Low cost, significant cost savings compared to standard traditional tray products.
2. Light in weight, wide range of sizes.
3. Fast heat dispersion.
4. Strong enough to withstand short circuits. Provides strength, rigidity without additional hardware.
5. Adapts to difficult architectural designs to accommodate changes in direction and elevation of cable runs.
6.Flexible, easy and fast installation. Design allows cable exit or entry at any point.
7. Cables can be secured to clamps or ties.
8.Various hardware accessories available to fix, support and install.
9. Safe smooth edge design to protect cable.
10.Easy for line check and cleaning , easy maintained.SKU: 407 -
DISTRIBUTION BOARDS, DISTRIBUTION BOARDS, Electro
Powertec 6 Way 100A Single Phase Consumer Units DB C/W MCB
DISTRIBUTION BOARDS, DISTRIBUTION BOARDS, ElectroPowertec 6 Way 100A Single Phase Consumer Units DB C/W MCB
0 out of 5(0)Features
These are most elegantly designed DBs, to suit the decor of homes
Raised neutral link for easy wiring
Spring loaded outer cover swings open by just pressing the lock as in case of Elegance series.
Supplied with masking sheet to protect components from cement during plastering
Supplied with neutral & earth link, top & bottom detachable platesSKU: 280 -
ELECTRICAL INDUSTRIAL, TRANSFORMER
ABB Transformer 300KVA 11/400KV
0 out of 5(0)Distribution transformers are typically oil-immersed and suitable for pole-, pad- or ground-mounting. They represent an economical option for certain networks, particularly those with low population densities.
Depending upon requirements, transformers may be connected between two phases of a three-phase system (two high voltage bushings) or from one phase to ground (single high voltage bushing).
The units are suitable for residential overhead distribution loads, as well as light commercial or industrial loads and diversified power applications.
Product scope
- Primary voltage: 300KV
- Typical fluid: mineral oil
SKU: DTS30011 -
ACCESSORIES, ELECTRICAL FITTINGS, Electro
Dignity 4×4 Adaptable Mounting Box/Unit
0 out of 5(0)PVC box size: 3X3 4X4 7X5 6X6 6X9 9X9 12X12″ etc feature: combustion-proof,good insulation property and good fire-resistant easily to be installed,is more long life protect the wire and cable from easy damage or ruin
SKU: 1417
Related products
-
Electro, ARMOURED CABLE, ELECTRICAL INDUSTRIAL
25mm 4 Core Amroured Cable|Per Meter (Kablemetal Nexans Nigeria)
Electro, ARMOURED CABLE, ELECTRICAL INDUSTRIAL25mm 4 Core Amroured Cable|Per Meter (Kablemetal Nexans Nigeria)
0 out of 5(0)25mm 4 Core Armoured Cable is a form of electrical cable that is commonly found carrying mains electricity to power networks, devices and buildings. It can also be found within industries such as railway and transport, as well as on pilons carrying mains electricity to houses and factories.
The construction is commonly identified by the following:-
– Plain Annealed Stranded Copper for the conductors/cores
– Cross-Linked Polyethylene (XLPE) for the insulation
– PVC (Polyvinyl Chloride) for the bedding and sheathing of the cable
– Steel Wire Armour to protect the insulating layers beneath.
No. of cores / size of cable – 4
Approx overall diameter – 26.1mm
Approx weight (m) – 1.9Kg
Armour / Protection – Steel Wire
Sheath / Jacket – PVC
Colour – Black
Voltage Rating – 600/1000VtSKU: 307 -
Electro, ELECTRICAL INDUSTRIAL, LADDERS
Aluminium A Ladders 8 steps
0 out of 5(0)Ladder comes in a vertical or inclined set of rungs or steps. There are two types: rigid ladders that can be leaned against a vertical surface such as a wall, and rope ladders that are hung from the top. The vertical members of a rigid ladder are called stringers or rails (US) or stiles (UK). Rigid ladders are usually portable, but some types are permanently fixed to buildings. They are commonly made of metal, wood, or fiberglass, but they have been known to be made of tough plastic.
SKU: 304 -
Electro, ELECTRICAL INDUSTRIAL, LADDERS
Ladders With Self Supported Trestle
0 out of 5(0)Product Features:
Wide fiberglass channel for grip and extra strength
Aluminum steps reduce overall weight without reducing protection level
D-rung ribbed steps offer flat surface climbing area for effortless climbing
Rung crimped onto stile for robustness and strength
Heavy duty PVC shoes provide greater grip and are non-markingSuited for electrical works:
Maintenance
Installation
Telecom Sectors
Electricity ProvidersSKU: 305 -
Electro, ELECTRICAL INDUSTRIAL, LADDERS
16 Feet Fiberglass Ladder
0 out of 5(0)ladder comes in a vertical or inclined set of rungs or steps. There are two types: rigid ladders that can be leaned against a vertical surface such as a wall, and rope ladders that are hung from the top. The vertical members of a rigid ladder are called stringers or rails (US) or stiles (UK). Rigid ladders are usually portable, but some types are permanently fixed to buildings. They are commonly made of metal, wood, or Fiberglass, but they have been known to be made of tough plastic.
SKU: 302
There are no reviews yet.