It is integrated with the slim HF electronic ballast for compactness. This batten is suitable for both direct and indirect lighting applications. It is mounted on a baseplate containing all the electrical and mechanical components for easy fixing to ceilings, cabinets or walls.
Fluorescent Fitting Philip with lamps 2ft Single Philips
1. Effective, high-quality batten for a single fluorescent lamp; suitable for both direct and indirect lighting applications
2. Integrated slim HF electronic ballast for compactness
3. Easy fixing to ceiling with baseplate on which all the electrical and mechanical components are mounted
4. Low Energy Consumptiom
5. Fluorescent Tube Included
₦31,800.00
CompareBased on 0 reviews
Be the first to review “Fluorescent Fitting Philip with lamps 2ft Single Philips”
-
SOLAR POWERED
Solar Power Systems 200W/36V
*solar panel: 200W/36V
*battery: 12V/100AH *2
*controller: 24V/10A
*inverter: 24V/500W sine wave * Multiple AC and DC output interface to achieve multiple
purposes: 1*24V DC,1*20V DC, 2*12V DC, 1* 9V DC,
2*5V USB, 3* 220V AC.
*Electricity generated per day: Approximately 0.6KWH in
sunny weather. * Electricity consumed per day: Maximum power
consumption 1.8 KWH.
*Total power consumption of loads should not exceed
400W per hour *AC
Adapter : Input AC100-240V,output DC28V/8A, by
option.SKU: 1555 -
CIRCUIT BREAKERS
TeSys Schneider Electric Overload Relays 1.6 – 2.5amps
3-pole relays with screw clamp terminals
These overload relays are designed for the protection of motors. They are
compensated and phase failure sensitive. Resetting can either be manual or
automatic.
Direct mounting: under the contactor for versions with screw clamp terminals only;
pre-wired terminals, see pages B11/28 and B11/30.
Separate mounting: using terminal block LA7 K0064 (see below).
On the front face of the overload relay:
b selection of reset mode: Manual (marked H) or Automatic (marked A),
b red pushbutton: Trip Test function,
b blue pushbutton: Stop and manual Reset,
b yellow trip flag indicator: overload relay tripped.
Protection by magnetic circuit breaker GV2 LE, see pages A6/11 and A6/20.SKU: Overload3 -
ARMOURED CABLE, ELECTRICAL INDUSTRIAL
150mm x 4 Core S.W.A/P.V.C Armoured Cable (Kablemetal Nexans Nigeria)
ARMOURED CABLE, ELECTRICAL INDUSTRIAL150mm x 4 Core S.W.A/P.V.C Armoured Cable (Kablemetal Nexans Nigeria)
150mm 4 Core Armoured Cable is a variant of steel wire armoured cable used for industrial electrical applications as well as being suitable for direct burial to carry mains electricity to various powered devices. It is also commonly found within powered networks such as within power stations and factories, etc.
This cable is commonly identified by the following construction; plain annealed stranded copper for the cores/conductors, polyvinyl chloride for the bedding and sheathing, cross-linked polyethylene for the insulation, with a steel wire armour protecting the layers beneath.
Although this cable is suitable for powering smaller, more domestic installations such as powering an outdoor shed or house as well as garden/water features, it is most commonly found within more industrial practices, as mentioned previously.SKU: 1523
There are no reviews yet.