It is integrated with the slim HF electronic ballast for compactness. This batten is suitable for both direct and indirect lighting applications. It is mounted on a baseplate containing all the electrical and mechanical components for easy fixing to ceilings, cabinets or walls.
Fluorescent Fitting Philip without lamps 4ft Single Philips
1. Effective, high-quality batten for a single fluorescent lamp; suitable for both direct and indirect lighting applications
2. Integrated slim HF electronic ballast for compactness
3. Easy fixing to ceiling with baseplate on which all the electrical and mechanical components are mounted
4. Low Energy Consumptiom
5. Fluorescent Tube Included
₦49,800.00
CompareBased on 0 reviews
Be the first to review “Fluorescent Fitting Philip without lamps 4ft Single Philips”
-
ARMOURED CABLE, ELECTRICAL INDUSTRIAL
50mm x 4Core Armoured Cable (Nigerchin Wire and Cable)
50mm 4 Core Armoured Cable is a large and specific size of Armoured Cable, primarily found within large powered networks whilst also carrying power to a range of different powered devices. Although this cable can be used for domestic uses such as powering outdoor sheds and greenhouses as well as water features and outdoor lights, due to its size, it is commonly found within more industrial installations such as power stations and large construction sites.
The cable is constructed itself from the following; Plain Annealed Stranded Copper for the cores/conductors, XLPE (Cross-Linked Polyethylene) for the insulation, PVC (Polyvinyl Chloride) for the bedding and sheathing & steel wire for the armour protecting the layers beneath.
The steel wire armour within the cable also provides a mechanical protection, therefore it enables the cable higher pulling loads, which is useful for when the cable is being dispensed from a large drum.
No. of cores / size of cable – 4
Approx overall diameter – 31.3mm
Approx weight (m) – 2.95Kg
Conductors – Plain Annealed Stranded Copper
Insulation – Cross-Linked Polyethylene
Bedding – Polyvinyl Chloride
Armour / Protection – Steel wire
Sheath / Jacket – Polyvinyl Chloride
Colour – Black
Application – Used primarily within large powered networks supplying mains electricity to multiple devices.
Voltage Rating: 600/1000VtSKU: 50mmnigerchin -
DISTRIBUTION BOARDS, DISTRIBUTION BOARDS, Electro
Havells 4 Way 100A Single Phase Consumer Units Distribution Board C/W MCB
DISTRIBUTION BOARDS, DISTRIBUTION BOARDS, ElectroHavells 4 Way 100A Single Phase Consumer Units Distribution Board C/W MCB
Features These are most elegantly designed DBs, to suit the decor of homes Raised neutral link for easy wiring Spring loaded outer cover swings open by just pressing the lock as in case of Elegancia series. Supplied with masking sheet to protect components from cement during plastering Supplied with neutral & earth link, top & bottom detachable plates
SKU: 273 -
ELECTRICAL INDUSTRIAL, Electro, TRANSFORMER
ABB 200KVA 11/400KV Distribution Transformer
Distribution transformers are typically oil-immersed and suitable for pole-, pad- or ground-mounting. They represent an economical option for certain networks, particularly those with low population densities.
Depending upon requirements, transformers may be connected between two phases of a three-phase system (two high voltage bushings) or from one phase to ground (single high voltage bushing).
The units are suitable for residential overhead distribution loads, as well as light commercial or industrial loads and diversified power applications.
Product scope
- Primary voltage: up to 36 kV
- Typical fluid: mineral oil
SKU: transfor200kva -
WIRE CABLE TRAY & CABLE LADDER
300mm X 50mm Nigeria Made Galvanized Cable Tray By 2.5 Meter
Embedded perforations for :
– extra load capacity
– better aeration
– better stability
– better condensation drainageAlternative perforations for :
– better fixation on the supports
– very useful for cable fixation
-Standard finish GalvanizedSKU: 400x 80 -
Electro, INDOOR LIGHTS, LED LIGHTS, LIGHTING
OSRAM LED SubstiTUBE Value ST8V-0.6m-9W-865-EM 9W/6500K
Product family features
- T8 LED tube made of glass with G13 base
- Mercury-free and RoHS compliant
- Luminous efficacy: up to 86 lm/W
- Type of protection: IP20
Product family benefits
- High color homogeneity
- Energy savings of up to 68 % compared to conventional 1,500 mm T8 fluorescent lamp
- Instant flickerfree starting
Areas of application
- Corridors, stairways, parking garages
- Cooling and storage rooms
- Warehouses
- Domestic applications
- General illumination within ambient temperatures from –20…+45 °C
Equipment / Accessories
- Suitable for operation on magnetic control gear
Legal advice
When used to replace a T8 fluorescent lamp the total energy efficiency and light distribution depends on the design of the lighting system.SKU: 12
There are no reviews yet.