✔ENERGY SAVING: Adiding Led high bay lights significantly save up to 75% electricity, while provides 19,500 lumens equivalent to 4*150W halogen lamps/sodium lamps.
✔ WIDELY USED: Preinstalled hook and hanging loop allow for a easy and fast installation. Adiding 150W LED high bay is perfect for factory, warehouse, workshop, garage, backyard, supermarket, exhibition hall, stadium.
✔ Lifetime rating of 50,000 hours, that’s over 10 years @ 10 hours/ day. 5-year warranty – contact us for an easy and fast support.
HiClean LED High Bay Light HB04-150W
i. Beam angle: 90 & 120 degrees
ii. Intelligent light system for your industrial, Sports or Assembly areas
iii. Green, energy savings, long and reliable life of 100,000 hours
iv. No RF interference, No IR/UV radiation, no mercury pollution
v. Wide color availability in degrees Kelvin(K), 3000, 4000, 5000K
vi. Superior Uniformity; Superior Temperature Stability
vii. Temperature tested for the toughest conditions
viii. Environmental friendly, energy savings (to 90%),
ix. Special circuit design, each LED work separately, avoiding the single broken
x. LED influence problem
xi. Control options – Occupancy/DALI, 1-10V Dimming, Wireless,
and Daylight Sensor
xii. DLC Listed, UL, SAA, CE, ENEC, GS, SASO, DMark, EMC, ROHS Approved
xiii. This high bay is suitable for fresh and frozen meat processing plants,
fruit and vegetable processing and canning facilities.
xiv. Equal to 400-600W HID
xv. Luminous Flux – 19,500lm
₦255,000.00
CompareBased on 0 reviews
Be the first to review “HiClean LED High Bay Light HB04-150W”
-
ARMOURED CABLE, ELECTRICAL INDUSTRIAL
2.5mm x 4Core Armoured Cable (Kablemetal)
2.5mm 4 Core Armoured Cable is commonly found supplying mains voltage electricity to powered devices and networks. For example, it could be used to power outdoor buildings such as garden sheds or workshops as well as garden features such as jacuzzi/hot tubs.
The cable contains a steel wire armour, meaning it provides a mechanical protection for the insulating layers underneath. This also enables the cable to have higher pulling loads, making it perfectly suitable for dispensing from a cable drum on a building site, etc.
It’s construction is commonly identified by the plain annealed stranded copper for the cores, the PVC (Polyvinyl Chloride) for the bedding and sheathing, armour made from steel wire and XLPE (Cross-Linked Polyethylene) for the insulation.
The Steel Wire can also be used as a CPC (Circuit Protective Conductor), meaning the armour can be used an earth for the cable. This means that even though the cable has an earth core, it is still protected, meaning it abides by all health and safety regulations.
No. of cores / size of cable – 4
Approx overall diameter – 15.3mm
Approx weight (m) – 0.43Kg
Conductors – Plain Annealed Stranded Copper
Insulation – Cross-Linked Polyethylene (XLPE)
Bedding – PVC
Armour / Protection – Steel Wire
Sheath / Jacket – PVC
Colour – Black
Application – Primarily found within powered networks and providing mains electricity to powered devices.
Voltage Rating: – 600/1000VtSKU: 8515 -
LED DRIVERS
Philips Xitanium 50W 230V LED DRIVER Philip
Eco passport – Our environmental product specifications overview
Philips cares about the environment and society at large, and strongly supports eco-design of products.Specifications
General Characteristics:
Housing – [Not Specified]
Lifetime – 50000 hr
Input Frequency – 50/60 Hz
Relative Humidity – 10 (min), 90 (max) %
IP Classification – 20
Lifetime 90% surv.@Tcaselife – 50000 hr
System Description – TD/TE [Touch&DALI/Trailing edge dimming]
Number of LEDs – xOperating Characteristics
12V output – Yes
Ripple current – 20 %
Efficiency Range – 88-90 %
Power Factor Range – 0.9
Output Power Range – 15-50 W
Power Factor (100% load) – 0.9 (min) –
Output Voltage Range – 31-62 V
Output Current Range (mA) – 300-1000
Dimming range – 100-10 %
Dimmable – Yes
Input Voltage Range (DC) – 186-250 V
Inrush Current Peak – 48 (max) A
Output Current Tolerance – -5 (min), 5 (max) %
Inrush Current Width to 50% – 180 us
Type of Dimming – Touch&DALI and trailing edge
Input Voltage Range (AC) – 220-240 V
Earth leakage current – 0.7 (max) mA
Max drivers on MCB(16A type-B) – 12 (max) x
Control input protection – Yes (Basic insulation)Wiring Characteristics
Connection on driver to L2 – JST connector
Hot wiring – Yes
Connector type input terminal – Wago 250
Connector type output terminal – Wago 250Product Dimensions
Length A1 – 140.0 mm
Width B1 – 75 mm
Height C1 – 32 mm
Fixing Hole Diameter D1 – 4.5 mm
Fixing Hole Distance Width B2 – 63.7 mm
Fixing Hole Distance Length A2 – 128.5 mmSKU: Philip Driver1
There are no reviews yet.