Complete range of 0.6m, 1.2m, 1.5m.Up to 70%~80% Energy-saving. Work without external ballast, Instant soft-start.No RF interference, No flickering or buzzing.Quick and easy installation to minimize retrofit costs. No Mercury and other hazardous materials, fully RoHS-compliant. ●Typical energy efficiency(1.2m): 1550lm@2700K@18W (>80lm/W);1700lm@4000K@18W (>90lm/W);1800lm@6000K@18W (>100lm/W) . ● Universal voltage: AC90-277V. ● Harmonic distortion 0.9. ● Uniform light output. ● Single end electricity & high safety. ● Almost zero UV&IR emissions
Kingsun LED 5ft LED Tube Light 23watt without Choke – 2years Warranty
– Length: (5feet) – Total system consumption: 23W – Input Voltage: AC100-277V – CCT: 6000K – Output Lumen: 2300lm – Lamp Base: G13 – Work without external ballast – No RF interference – Warranty: 2 years – Single end electricity & high safety – Instant soft-start
₦8,000.00
CompareBased on 0 reviews
Be the first to review “Kingsun LED 5ft LED Tube Light 23watt without Choke – 2years Warranty”
-
WIRE CABLE TRAY & CABLE LADDER
150mm X 50mm Nigeria made Galvanized Cable Tray By 2.5 Meter
Embedded perforations for : – extra load capacity – better aeration – better stability – better condensation drainage Alternative perforations for : – better fixation on the supports – very useful for cable fixation -Standard finish Galvanized
SKU: N150x50 -
DISTRIBUTION BOARDS, DISTRIBUTION BOARDS, Electro
Schneider Electric 3 Phase 12 Ways Distribution Board
DISTRIBUTION BOARDS, DISTRIBUTION BOARDS, ElectroSchneider Electric 3 Phase 12 Ways Distribution Board
Disbo-Extra Isobar is a complete range of single and 3 phase distribution boards for commercial and industrial applications.
Standard distribution boards up to 24 ways
Meter ready distribution boards up to 24 ways
Split metered distribution boards up to 22 ways
Any outgoing way can be converted to switch the Neutral
Fully type tested conditional short circuit rating of 25kA to BS EN 61439-3
High performance MCB 10kA BS EN 60898 15kA BS EN 60947-2 in B, C or D curve 1, 2, 3, 4 pole
250A Busbar rating
Isobar disconnection to BS EN 60947-3 ensuring unused outgoing ways are isolated
Option of switching outgoing neutral on all boards using distributed neutral kit
Terminal block for feeding up to 100A
Range of incomers: switch disconnectors, residual current devices, terminal blocks, MCCB
Single pole RCBO for new or retrofit maintaining device density
Full range of device accessories and auxiliaries
Knockouts for cable gland and conduit mixed to suit the installation needs without loss of space
Removable insulated pan assembly
Fully shrouded neutral
Split neutral bars
Removable gland plates
Optional metering, dual supply, surge protection and contactor on incoming Metered extension enclosures.SKU: Schneider9 -
ELECTRICAL INDUSTRIAL, TRANSFORMER
ABB Transformer 500KVA 11/400KV
Distribution transformers are typically oil-immersed and suitable for pole-, pad- or ground-mounting. They represent an economical option for certain networks, particularly those with low population densities.
Depending upon requirements, transformers may be connected between two phases of a three-phase system (two high voltage bushings) or from one phase to ground (single high voltage bushing).
The units are suitable for residential overhead distribution loads, as well as light commercial or industrial loads and diversified power applications.
Product scope
- Primary voltage: 500kva
- Typical fluid: mineral oil
SKU: dts50011
There are no reviews yet.