Complete range of 0.6m, 1.2m, 1.5m.Up to 70%~80% Energy-saving. Work without external ballast, Instant soft-start.No RF interference, No flickering or buzzing.Quick and easy installation to minimize retrofit costs. No Mercury and other hazardous materials, fully RoHS-compliant. ●Typical energy efficiency(1.2m): 1550lm@2700K@18W (>80lm/W);1700lm@4000K@18W (>90lm/W);1800lm@6000K@18W (>100lm/W) . ● Universal voltage: AC90-277V. ● Harmonic distortion 0.9. ● Uniform light output. ● Single end electricity & high safety. ● Almost zero UV&IR emissions
Kingsun LED 5ft LED Tube Light 23watt without Choke – 2years Warranty
– Length: (5feet) – Total system consumption: 23W – Input Voltage: AC100-277V – CCT: 6000K – Output Lumen: 2300lm – Lamp Base: G13 – Work without external ballast – No RF interference – Warranty: 2 years – Single end electricity & high safety – Instant soft-start
₦8,000.00
CompareBased on 0 reviews
Be the first to review “Kingsun LED 5ft LED Tube Light 23watt without Choke – 2years Warranty”
-
CHANGEOVER SWITCHES, Electro, GEAR SWITCHES & CHANGEOVER
Standard 100Amps Changeover Switch
Features:
DMC terminal blocks are provided for cable termination having excellent mechanical, thermal and dielectric properties.
Side Handle Operation.
The enclosure is made of sheet steel suitable for individual mounting.
Terminals suitable for both Al. & Cu conductors.
Adequate knockouts provided for entry of cables.
Door interlocking facility provided.
mounting holes for switch ratings upto 320A and mounting brackets
for switch rating of 400A and above.SKU: Standard100 -
CIRCUIT BREAKERS
TeSys Schneider Electric Overload Relays 2.3-4amps
3-pole relays with screw clamp terminals
These overload relays are designed for the protection of motors. They are
compensated and phase failure sensitive. Resetting can either be manual or
automatic.
Direct mounting: under the contactor for versions with screw clamp terminals only;
pre-wired terminals, see pages B11/28 and B11/30.
Separate mounting: using terminal block LA7 K0064 (see below).
On the front face of the overload relay:
b selection of reset mode: Manual (marked H) or Automatic (marked A),
b red pushbutton: Trip Test function,
b blue pushbutton: Stop and manual Reset,
b yellow trip flag indicator: overload relay tripped.
Protection by magnetic circuit breaker GV2 LE, see pages A6/11 and A6/20.SKU: Overload2 -
CIRCUIT BREAKERS
TeSys Schneider Electric Overload Relays 23 – 32amps
3-pole relays with screw clamp terminals
These overload relays are designed for the protection of motors. They are
compensated and phase failure sensitive. Resetting can either be manual or
automatic.
Direct mounting: under the contactor for versions with screw clamp terminals only;
pre-wired terminals, see pages B11/28 and B11/30.
Separate mounting: using terminal block LA7 K0064 (see below).
On the front face of the overload relay:
b selection of reset mode: Manual (marked H) or Automatic (marked A),
b red pushbutton: Trip Test function,
b blue pushbutton: Stop and manual Reset,
b yellow trip flag indicator: overload relay tripped.
Protection by magnetic circuit breaker GV2 LE, see pages A6/11 and A6/20.SKU: Overload6 -
ELECTRICAL FITTINGS, Electro, TRUNCKING
100x100mm Dignity PVC Trunking
The advantages of PVC Wire Duct:
1. Low cost, significant cost savings compared to standard traditional tray products.
2. Light in weight, wide range of sizes.
3. Fast heat dispersion.
4. Strong enough to withstand short circuits. Provides strength, rigidity without additional hardware.
5. Adapts to difficult architectural designs to accommodate changes in direction and elevation of cable runs.
6.Flexible, easy and fast installation. Design allows cable exit or entry at any point.
7. Cables can be secured to clamps or ties.
8.Various hardware accessories available to fix, support and install.
9. Safe smooth edge design to protect cable.
10.Easy for line check and cleaning , easy maintained.SKU: 406
There are no reviews yet.