The Clipsal C-Bus system is a microprocessor based wiring system to control lighting and other electrical services. From on/off control of a lighting circuit to analogue type control, Such as dimming electronic fluorescent ballasts, C-Bus can control and automate virtually any type of electrical load
Legrand CLIPSAL SWITCH 1 GANG – 30Amps
Key Features:
1 gang
Rockers are a long throw momentary action type
C-bus learn enabled
LED button indicators provide illumination and status feedback
Night light feature
Fall back level option to dim indicators at a set time after the last button press
Mounted using standard mounting accessories
₦6,600.00
CompareBased on 0 reviews
Be the first to review “Legrand CLIPSAL SWITCH 1 GANG – 30Amps”
-
ELECTRICAL FITTINGS, Electro, TRUNCKING
50x75mm Dignity PVC Trunking
The advantages of PVC Wire Duct:
1. Low cost, significant cost savings compared to standard traditional tray products.
2. Light in weight, wide range of sizes.
3. Fast heat dispersion.
4. Strong enough to withstand short circuits. Provides strength, rigidity without additional hardware.
5. Adapts to difficult architectural designs to accommodate changes in direction and elevation of cable runs.
6.Flexible, easy and fast installation. Design allows cable exit or entry at any point.
7. Cables can be secured to clamps or ties.
8.Various hardware accessories available to fix, support and install.
9. Safe smooth edge design to protect cable.
10.Easy for line check and cleaning , easy maintained.SKU: 412 -
CIRCUIT BREAKERS
TeSys Schneider Electric Overload Relays 23 – 32amps
3-pole relays with screw clamp terminals
These overload relays are designed for the protection of motors. They are
compensated and phase failure sensitive. Resetting can either be manual or
automatic.
Direct mounting: under the contactor for versions with screw clamp terminals only;
pre-wired terminals, see pages B11/28 and B11/30.
Separate mounting: using terminal block LA7 K0064 (see below).
On the front face of the overload relay:
b selection of reset mode: Manual (marked H) or Automatic (marked A),
b red pushbutton: Trip Test function,
b blue pushbutton: Stop and manual Reset,
b yellow trip flag indicator: overload relay tripped.
Protection by magnetic circuit breaker GV2 LE, see pages A6/11 and A6/20.SKU: Overload6 -
ARMOURED CABLE, ELECTRICAL INDUSTRIAL, Electro
25mm 4 Core Amroured Cable|Per Meter (Kablemetal Nexans Nigeria)
ARMOURED CABLE, ELECTRICAL INDUSTRIAL, Electro25mm 4 Core Amroured Cable|Per Meter (Kablemetal Nexans Nigeria)
25mm 4 Core Armoured Cable is a form of electrical cable that is commonly found carrying mains electricity to power networks, devices and buildings. It can also be found within industries such as railway and transport, as well as on pilons carrying mains electricity to houses and factories.
The construction is commonly identified by the following:-
– Plain Annealed Stranded Copper for the conductors/cores
– Cross-Linked Polyethylene (XLPE) for the insulation
– PVC (Polyvinyl Chloride) for the bedding and sheathing of the cable
– Steel Wire Armour to protect the insulating layers beneath.
No. of cores / size of cable – 4
Approx overall diameter – 26.1mm
Approx weight (m) – 1.9Kg
Armour / Protection – Steel Wire
Sheath / Jacket – PVC
Colour – Black
Voltage Rating – 600/1000VtSKU: 307
There are no reviews yet.