Add a little sparkle to your room with our Marie Therese three-arm indoor chandelier. A true statement piece for bedrooms, living rooms, dining rooms or hallways, this chandelier’s candles are surrounded by a mass of crystal-effect beads, which twinkle to reflect the light beautifully. Measuring 46cm wide, this three-arm electric chandelier has an adjustable drop of between 54cm and 114cm. The crystal ceiling light fitting requires mains supply, wiring and some assembly, for which full instructions are provided. It is for indoor use, is not suitable for bathrooms, and takes three SES 42W candle bulbs or 11W energy savers, which are not included. Always read instructions.
Marie Therese Chandelier Clear 3 Arm
-For your safety, this product must be installed in accordance with local Building Regulations. If in any doubt, or where required by law, consult a competent person who is registered with an electrical self-certification scheme. Further information is available online or from your local authority-
₦0.00
CompareBased on 0 reviews
Be the first to review “Marie Therese Chandelier Clear 3 Arm”
-
Electro, SOCKETS, SOCKETS & SWITCHES
BG Nexus Screwless 15Amp 1 Gang Double Pole Socket Outlet Brushed Steel FBS99G
Electro, SOCKETS, SOCKETS & SWITCHESBG Nexus Screwless 15Amp 1 Gang Double Pole Socket Outlet Brushed Steel FBS99G
This Nexus Flatplate range of wiring accessories has a modern slimline clip-on screwless front plate and will blend with any decor. Suitable for both domestic and commercial installations
Key Features
Fixed integrated plastic gasket to protect metal edges from moisture
Stylish modern slim profile
Colour matched fixing screws
Lightly lacquered surface to reduce fingerprint marksInstallation
Backed out captive screws for easy installation
Minimum mounting box depth 25mm
Terminal capacity 3 x 2.5mm²; 3 x 4.0mm² & 2 x 6.0mmColour – Steel
Finish – Brushed Steel
Range – Nexus Metal
Size – 90 x 92 x 33m
Unit Of Sale – Each
Weight – 0.17kg
Brand – BG Nexus
EDP code – FBS21G
Screwed / Screwless – Screwless
Insert Colour – Grey
Number of Gangs – 1 Gang
Pole Type – Double Pole
Amps – 15ASKU: FBS99G -
CIRCUIT BREAKERS
TeSys Schneider Electric Overload Relays 30 – 40amps
3-pole relays with screw clamp terminals
These overload relays are designed for the protection of motors. They are
compensated and phase failure sensitive. Resetting can either be manual or
automatic.
Direct mounting: under the contactor for versions with screw clamp terminals only;
pre-wired terminals, see pages B11/28 and B11/30.
Separate mounting: using terminal block LA7 K0064 (see below).
On the front face of the overload relay:
b selection of reset mode: Manual (marked H) or Automatic (marked A),
b red pushbutton: Trip Test function,
b blue pushbutton: Stop and manual Reset,
b yellow trip flag indicator: overload relay tripped.
Protection by magnetic circuit breaker GV2 LE, see pages A6/11 and A6/20.SKU: Overload5 -
ELECTRICAL FITTINGS, Electro, TRUNCKING
16x25mm Dignity PVC Trunking
The advantages of PVC Wire Duct:
1. Low cost, significant cost savings compared to standard traditional tray products.
2. Light in weight, wide range of sizes.
3. Fast heat dispersion.
4. Strong enough to withstand short circuits. Provides strength, rigidity without additional hardware.
5. Adapts to difficult architectural designs to accommodate changes in direction and elevation of cable runs.
6.Flexible, easy and fast installation. Design allows cable exit or entry at any point.
7. Cables can be secured to clamps or ties.
8.Various hardware accessories available to fix, support and install.
9. Safe smooth edge design to protect cable.
10.Easy for line check and cleaning , easy maintained.SKU: 408 -
Electro, GEAR SWITCHES, GEAR SWITCHES & CHANGEOVER
HAVELLS 400A ROTARY CHANGEOVER SWITCH
• Suitable for individual mounting, inner mounting holes and mounting brackets provided in enclosures.
• Sheet steel enclosure duly phosphatised and powder painted for longer life.
• Provision for door interlocking.
• Termination suitable for Aluminum cables, adequate knockouts provided in the enclosure for cable entry
630A, 63A, 400A, 200A,SKU: 1573 -
HIGH BAY LIGHTS
Luceco LED Highbay Light LHBR 200W (31200lm)
Product Features
IP65 highbay with industry-leading efficacy
Multiple mounting options
Integrated heat sink
IP65 PIR sensor compatible
IP65 Integrated emergency
Stainless steel hardware
0-10V Dimmable
Supplied with 2′ of SJTW cable
1′ safety chain includedColor Temperature: 4000K, 5000K
Efficacy: Up to 160lm/W
Lumen Maintenance: L70 calculated at 100,000hrs
IP Rating: IP65
Beam Angle: 60°, 90°, 120°SKU: Luceco200w
There are no reviews yet.