Electrical data
Nominal voltage 220…240 V
Mains frequency 50/60 Hz
Input voltage DC –
Operating frequency 25 kHz 1)
Length 103.0 mm
Width 67.0 mm
Height 31.0 mm
Mounting hole spacing, length 110.0 mm
Product weight 150.00 g
₦22,800.00
CompareElectrical data
Nominal voltage 220…240 V
Mains frequency 50/60 Hz
Input voltage DC –
Operating frequency 25 kHz 1)
Length 103.0 mm
Width 67.0 mm
Height 31.0 mm
Mounting hole spacing, length 110.0 mm
Product weight 150.00 g
Brand – MK
Colour – White
No. of Gangs – 2
No. of Ways – 2
Pack Size – 1
Parent Colour – White
Pieces in Pack/Case – 1
Product Type – Light Switch
Profile Type – Slim
Switches & Sockets Finish – Plastic
Switches & Sockets Product Type – Light Switch
Switches & Sockets Profile Type – Raised Slim
Total Product Weight – 0.075 kg
‘-For your safety, this product must be installed in accordance with local Building Regulations. If in any doubt, or where required by law, consult a competent person who is registered with an electrical self-certification scheme. Further information is available online or from your local authority.
Specifications:
• Optional wattage: 7-105W
• Operating voltage: 110 to 130V or 220 to 240V
• Frequency: 50/60Hz
• Average lifetime: 6000hrs/8000 hrs/10000hrs available
• Optional base: E27/B22/E14
• Optional Color Temperature: 2,700K/4,100K/6,500K
Applications:
Shopping malls, table lamps, pendent lamps, supermarkets, restaurants, shops, hotels etc.
Safety information: This product is glass and should not be used if broken or damaged. Always unplug your appliance and let your light bulb cool before attempting to change it. Always read the label before use.
Halogen spotlight bulb. Energy rating D. Lasts up to 2000 hours. Starting time instant. See pack for further details.
3-pole relays with screw clamp terminals
These overload relays are designed for the protection of motors. They are
compensated and phase failure sensitive. Resetting can either be manual or
automatic.
Direct mounting: under the contactor for versions with screw clamp terminals only;
pre-wired terminals, see pages B11/28 and B11/30.
Separate mounting: using terminal block LA7 K0064 (see below).
On the front face of the overload relay:
b selection of reset mode: Manual (marked H) or Automatic (marked A),
b red pushbutton: Trip Test function,
b blue pushbutton: Stop and manual Reset,
b yellow trip flag indicator: overload relay tripped.
Protection by magnetic circuit breaker GV2 LE, see pages A6/11 and A6/20.
There are no reviews yet.