Different Technologies are coming up to reduced environmental hazards arising from power generation effluents/wastes that have greenhouse effects. An example of such technologies is the solar technology. To this end, we have introduced Electronics powered by solar that is the most advanced and sophisticated in the industry to date.
Solar Power Systems 150W/36V
Out of stock
*solar panel: 150W/36V *2
*battery: 12V/100AH *4
*controller: 24V/15A
*inverter: 24V/600W sine wave * Multiple AC and DC output interface to achieve multiple
purposes: 1*24V DC,1*20V DC, 1*12V DC, 2*5V USB,
3* 220V AC..
*Electricity generated per day: Approximately 0.9KWH in
sunny weather. * Electricity consumed per day: Maximum power
consumption 3.6 KWH.
*Total power consumption of loads should not exceed
480W per hour
*AC Adapter : Input AC100-240V,output DC28V/8A, by
option.
₦335,000.00
Out of stock
CompareBased on 0 reviews
Be the first to review “Solar Power Systems 150W/36V”
-
DISTRIBUTION BOARDS, DISTRIBUTION BOARDS, Electro
Powertec 8 Way 100A Single Phase Consumer Units DB C/W MCB
DISTRIBUTION BOARDS, DISTRIBUTION BOARDS, ElectroPowertec 8 Way 100A Single Phase Consumer Units DB C/W MCB
Features
These are most elegantly designed DBs, to suit the decor of homes
Raised neutral link for easy wiring
Spring loaded outer cover swings open by just pressing the lock as in case of Elegance series.
Supplied with masking sheet to protect components from cement during plastering
Supplied with neutral & earth link, top & bottom detachable plates.SKU: 282 -
CIRCUIT BREAKERS
TeSys Schneider Electric Overload Relays 30 – 40amps
3-pole relays with screw clamp terminals
These overload relays are designed for the protection of motors. They are
compensated and phase failure sensitive. Resetting can either be manual or
automatic.
Direct mounting: under the contactor for versions with screw clamp terminals only;
pre-wired terminals, see pages B11/28 and B11/30.
Separate mounting: using terminal block LA7 K0064 (see below).
On the front face of the overload relay:
b selection of reset mode: Manual (marked H) or Automatic (marked A),
b red pushbutton: Trip Test function,
b blue pushbutton: Stop and manual Reset,
b yellow trip flag indicator: overload relay tripped.
Protection by magnetic circuit breaker GV2 LE, see pages A6/11 and A6/20.SKU: Overload5 -
SURGE PROTECTOR
Sollatek Voltage Stabliser (SVS) – 15 Amp – 3600VA – 240V
SVS15 monitors the main voltage continously,If the voltage rises or drops, The SVS will stabilise the output to ensure the voltage
reaching your equipment remains constant at 230v,within the operating range of the unit.SKU: 5060037800177
There are no reviews yet.