TeSys LR9D and LR9F electronic overload relays provide simple, flexible and reliable motor protection.
TeSys Schneider Electric Overload Relays 18 – 23amps
3-pole relays with screw clamp terminals
These overload relays are designed for the protection of motors. They are
compensated and phase failure sensitive. Resetting can either be manual or
automatic.
Direct mounting: under the contactor for versions with screw clamp terminals only;
pre-wired terminals, see pages B11/28 and B11/30.
Separate mounting: using terminal block LA7 K0064 (see below).
On the front face of the overload relay:
b selection of reset mode: Manual (marked H) or Automatic (marked A),
b red pushbutton: Trip Test function,
b blue pushbutton: Stop and manual Reset,
b yellow trip flag indicator: overload relay tripped.
Protection by magnetic circuit breaker GV2 LE, see pages A6/11 and A6/20.
₦12,000.00
CompareBased on 0 reviews
Be the first to review “TeSys Schneider Electric Overload Relays 18 – 23amps”
-
ARMOURED CABLE, ELECTRICAL INDUSTRIAL
70mm x 4Core Amroured Cable (Nigerchin Cable and Wire)
70mm 4 Core Armoured Cable is a size and type of steel wire armoured cable. Primarily found in large powered networks and underneath roadways supplying mains electricity to large buildings. It can also be found within the transport industry, specifically railways powering the trains and buildings located beside the tracks. Due to the size of this cable, it is perfectly suitable for large amounts of power running through it on a daily basis, 24 hours a day.
The best solution to this issue would be to buy a length of earth cable that matches the length of the Armoured Cable. This would negate the steel wire from being used as an earth, meaning it is a safer alternative.
70mm 4 Core Armoured Cable is constructed from the following materials;
– Plain Annealed Stranded Copper for the cores
– Cross-Linked Polyethylene for the Insulation
– PVC (Polyvinyl Chloride) for the bedding and sheathing
– Steel Wire for the armour protecting the insulating layers beneath.
No. of cores / size of cable – 4
Approx overall diameter – 36.8mm
Approx weight (m) – 4.23Kg
Conductors – Plain Annealed Stranded Copper
Insulation – Cross-Linked Polyethylene
Bedding – Polyvinyl Chloride
Armour / Protection – Steel Wire
Sheath / Jacket – Polyvinyl Chloride
Colour – Black
Application – Primarily found in large powered networks as well as buried underneath roads supplying mains electricity to large buildings etc.
Voltage Rating – 600/1000VtSKU: 70mmnigerchin -
CABLE AND CABLE MANAGEMENT, Electro, SINGLE CORE WIRE
Cutix 4mm Single Core Copper Wire
Our cables with PVC (Polyvinyl Chloride) sheathing are used in a vast number of applications from fixed wiring to flexible installations and they are available in various sizes, colours and number of conductors.
SKU: Cutix4m -
Electro, HOME&OFFICE LIGHTING, LIGHTING, SPOTLIGHTS
3 Arm Dome Spotlight Ceiling Light Silver
‘-For your safety, this product must be installed in accordance with local Building Regulations. If in any doubt, or where required by law, consult a competent person who is registered with an electrical self- certification scheme. Further information is available online or from your local authority-
SKU: 223 -
Electro, ENERGY SAVING BULBS, LIGHT BULBS, LIGHTING
Osram B22 (Pin) 11W Energy Saving Bulb
Compact fluorescent lamps by OSRAM has high level of economy. They have an impressive average service life up to 20 times longer and consume considerably less energy by up to 80%. Because of their higher efficiency they can be operated very economically and soon make pay for themselves.
Compact fluorescent lamps by OSRAM also reduce CO2 emissions in comparison to similar incandescent lamps by up to 80 % – an active contribution to climate protection combined with incredible cost reduction.SKU: 774 -
ELECTRICAL INDUSTRIAL, HIGH BAY LIGHTS
Osram LEDVANCE HighBay LED Pro 150W
Benefit highlights
Replacement for traditional
high-bay luminaires
Energy savings of up to 60%
High luminous efficacy with up to 135 lm/W
Exclusive LEDVANCE design with optimized size and weight
Different luminous flux and beam angles for different mounting heights available
Accessories includedRecommended applications
General lighting for high ceilings
Warehouses, logistics centers
IndustryBenefits for your projects
The LEDVANCE High Bay LED luminaires are suitable replacements for 200W/400W HQI High-Bay luminaires with an energy saving potential of up to 60% compared to the old lighting technology. They are produced in a compact and exclusive LEDVANCE design and are weight and size optimized.The LED High Bays provide different luminous flux and a beam angle for mounting heights of 6 to 14 m. Accessories like a hook and a bracket are included, same with a cable of 1,500 mm length. The LED luminaires have an aluminum housing and a lens made from robust plastic (PC). They come with a three-year guarantee.
SKU: Osram150w
There are no reviews yet.