With its three fine curved arms and upturned frosted glass shades, our Classic three-arm antique bronze indoor ceiling light exudes understated elegance. The central fitting and three arms all have an antique bronze finish that is nostalgically sophisticated, and its white glass shades, which feature a subtle smoked patterning, give off a soft, flattering glow. The light fixture has a 35cm drop and a width of 52cm and requires mains supply, wiring and some assembly, for which full instructions are provided. This three-arm ceiling light requires three candle SES 42W regular or 11W energy saving bulbs, which are not included. Please note: this light fitting is not suitable for bathrooms. Assembly required.
York Light Fitting Ceiling Antique Brass Effect 3 Light
‘-For your safety, this product must be installed in accordance with local Building Regulations. If in any doubt, or where required by law, consult a competent person who is registered with an electrical self-certification scheme. Further information is available online or from your local authority-
₦0.00
CompareBased on 0 reviews
Be the first to review “York Light Fitting Ceiling Antique Brass Effect 3 Light”
-
DISTRIBUTION BOARDS, DISTRIBUTION BOARDS, Electro
Havells 4 Way 100A Single Phase Consumer Units Distribution Board C/W MCB
DISTRIBUTION BOARDS, DISTRIBUTION BOARDS, ElectroHavells 4 Way 100A Single Phase Consumer Units Distribution Board C/W MCB
Features These are most elegantly designed DBs, to suit the decor of homes Raised neutral link for easy wiring Spring loaded outer cover swings open by just pressing the lock as in case of Elegancia series. Supplied with masking sheet to protect components from cement during plastering Supplied with neutral & earth link, top & bottom detachable plates
SKU: 273 -
ELECTRICAL FITTINGS, Electro, TRUNCKING
50x75mm Dignity PVC Trunking
The advantages of PVC Wire Duct:
1. Low cost, significant cost savings compared to standard traditional tray products.
2. Light in weight, wide range of sizes.
3. Fast heat dispersion.
4. Strong enough to withstand short circuits. Provides strength, rigidity without additional hardware.
5. Adapts to difficult architectural designs to accommodate changes in direction and elevation of cable runs.
6.Flexible, easy and fast installation. Design allows cable exit or entry at any point.
7. Cables can be secured to clamps or ties.
8.Various hardware accessories available to fix, support and install.
9. Safe smooth edge design to protect cable.
10.Easy for line check and cleaning , easy maintained.SKU: 412 -
ELECTRICAL FITTINGS, Electro, MODULAR FITTING
4x36W 600×600 Recessed Modular Prismatic
Modular Fitting has an extremely small recess depth 53mm which makes it perfect for shallow ceiling voids. It is also suitable for lay in suspended grid ceilings and comes complete with wire retention safety cable. Rapid installation and maintenance are further facilitated by a quick release louvre device, which is particularly useful during potentially disruptive lamp changes. Ivy Classic is also supplied with a peel off protective cover, to keep the luminaire bright, clean and dust free during carriage and installation.
Once in place, Modular Fitting offers bright, glare free lighting courtesy of its brilliant aluminum louvre and either its 4 x 14W or 3 x 14W T5 lamps. This efficient combination of source and reflector offers a high light output ratio (LOR) of up to 78% and more.
SKU: 057 -
ARMOURED CABLE, ELECTRICAL INDUSTRIAL
10mm x 4Core Armoured Cable (Nigerchin WIRE AND CABLE)
10mm 4 Core Armoured Cable is a large variant of electrical cable used to supply mains voltage electricity to various devices and powered networks. Weatherproof and dust-proof, this cable is suitable for underground installation as well as being attached to structures or buildings using Cable Cleats. It is commonly found in a range of installations including;
– The Railway and Transport industry
– Underneath roads powering buildings
– Industrial networks such as power plants and factories
– Within cable ducting in the roofs of warehouses
The Cable is constructed from the following materials; Plain Annealed Stranded Copper for the conductors/cores, cross-linked polyethylene (XLPE) for the insulation, Steel Wire for the Armour and PVC (Polyvinyl Chloride) for the bedding and sheathing.
No. of cores / size of cable – 4
Approx overall diameter – 21.1mm
Approx weight (m) – 0.98Kg
Conductors – Plain Annealed Stranded Copper
Insulation – Cross-Linked Polyethylene (XLPE)
Bedding – PVC
Armour / Protection – Steel Wire
Sheath / Jacket – PVC
Colour – Black
Application – Primarily found within powered networks and providing mains electricity to powered devices.
Voltage Rating: – 600/1000VtSKU: 10mmnigerchin -
Electro, ENERGY SAVING BULBS, LIGHT BULBS, LIGHTING
Philips E27(Screw) 8W Energy Saving Bulb Philip
Enjoy super savings for 10 years with Philips’ smallest energy saving stick. This little energy saver will pay for itself within the first year and continue to reduce your bills for subsequent years after. Its small size makes it versatile enough to fit into any fitting where you need extra bright light in the home. It has a high energy efficiency rating (European energy efficiency labelling class A).
SKU: 778
There are no reviews yet.