With its three fine curved arms and upturned frosted glass shades, our Classic three-arm antique bronze indoor ceiling light exudes understated elegance. The central fitting and three arms all have an antique bronze finish that is nostalgically sophisticated, and its white glass shades, which feature a subtle smoked patterning, give off a soft, flattering glow. The light fixture has a 35cm drop and a width of 52cm and requires mains supply, wiring and some assembly, for which full instructions are provided. This three-arm ceiling light requires three candle SES 42W regular or 11W energy saving bulbs, which are not included. Please note: this light fitting is not suitable for bathrooms. Assembly required.
York Light Fitting Ceiling Antique Brass Effect 3 Light
-For your safety, this product must be installed in accordance with local Building Regulations. If in any doubt, or where required by law, consult a competent person who is registered with an electrical self-certification scheme. Further information is available online or from your local authority-
₦0.00
CompareBased on 0 reviews
Be the first to review “York Light Fitting Ceiling Antique Brass Effect 3 Light”
-
CHANGEOVER SWITCHES, Electro, GEAR SWITCHES & CHANGEOVER
STANLEY 100A Changeover Switch
Stanley Products always provides new technology for all industrial requirements, with excellent value for their investments. You can depend upon for matchless quality on all Stanley Products. Our new range products in sheet metal Side Handle Operating Switchgear are made as per industrial requirements with powder coating. This certificate of “Stanley” original products, issued with the assurance as the same has been manufactured in accordance with requirement of IEC-60947-3 (2005-06). Quality system, standards and mechanism has been tested satisfactory to the specific test as follows: 1. Dielectric Test 2. Mechanical Operation Test 3. High Voltage Test 4. Insulation Resistance Test 5. Temperature Rise Test 6. Mini Volt Drop Test STANLEY 100A Changeover Switch
SKU: 1575 -
ACCESSORIES
CROWN MICRO UPS 1000X
Uninterruptible power supply enables you to work comfortably at your computer without fear of sudden power failure during operation. You can safely shut down the PC, while preserving all of the data. The model is designed to protect personal computers and workstations from the major problems with power supply: high emissions of electromagnetic and radio frequency interference, slides, promotions and extinction voltage sources.
CMU-1000X
A stylish, reliable, efficient – UPS CROWN – a guarantee of stability and durability of your equipment.
Features:
AVR (stabilizer) – automatic voltage regulation;
Seven amp battery;
Long-life batteries;
Unsurpassed design;
Ease of use;
Quality assurance.SKU: 3.0 -
Electro, ENERGY SAVING BULBS, LIGHT BULBS, LIGHTING
Philips E27(Screw) 23W Energy Saving Bulb
Enjoy super savings for 10 years with Philips’ smallest energy saving stick. This little energy saver will pay for itself within the first year and continue to reduce your bills for subsequent years after. Its small size makes it versatile enough to fit into any fitting where you need extra bright light in the home. It has a high energy efficiency rating (European energy efficiency labelling class A).
SKU: 766 -
CIRCUIT BREAKERS
TeSys Schneider Electric Overload Relays 4-6amps
3-pole relays with screw clamp terminals
These overload relays are designed for the protection of motors. They are
compensated and phase failure sensitive. Resetting can either be manual or
automatic.
Direct mounting: under the contactor for versions with screw clamp terminals only;
pre-wired terminals, see pages B11/28 and B11/30.
Separate mounting: using terminal block LA7 K0064 (see below).
On the front face of the overload relay:
b selection of reset mode: Manual (marked H) or Automatic (marked A),
b red pushbutton: Trip Test function,
b blue pushbutton: Stop and manual Reset,
b yellow trip flag indicator: overload relay tripped.
Protection by magnetic circuit breaker GV2 LE, see pages A6/11 and A6/20.SKU: Overload1 -
ELECTRICAL INDUSTRIAL, HIGH BAY LIGHTS
Osram LEDVANCE HighBay LED Pro 200W (23000lm)
Benefit highlights
Replacement for traditional
high-bay luminaires
Energy savings of up to 60%
High luminous efficacy with up to 135 lm/W
Exclusive LEDVANCE design with optimized size and weight
Different luminous flux and beam angles for different mounting heights available
Accessories includedRecommended applications
General lighting for high ceilings
Warehouses, logistics centers
IndustryBenefits for your projects
The LEDVANCE High Bay LED luminaires are suitable replacements for 200W/400W HQI High-Bay luminaires with an energy saving potential of up to 60% compared to the old lighting technology. They are produced in a compact and exclusive LEDVANCE design and are weight and size optimized.The LED High Bays provide different luminous flux and a beam angle for mounting heights of 6 to 14 m. Accessories like a hook and a bracket are included, same with a cable of 1,500 mm length. The LED luminaires have an aluminum housing and a lens made from robust plastic (PC). They come with a three-year guarantee.
SKU: Osram200W
There are no reviews yet.