Each Armored cable contains high strength, good bending performance, no gel, easy to be connected and operated on with buffer design, independent strength member and sheath to prevent damage from environmental and mechanical stress. Outer jacket’s colors varies according to the types of optical fibers (indoor use), black color is recommended for outdoor use, options for other colors available upon request.
10mm x 4Core Armoured Cable Coleman
Suitable for under and over-ground usage alike, 6mm 4 Core Armoured Cable is a dust and waterproof variant of electrical cable that is commonly found within powered networks and supplying mains electricity to a large variety of devices, both domestic and industrial.
This particular type of cable is constructed using Plain Annealed Stranded Copper for the conductors, XLPE (Cross-Linked Polyethylene) for the insulation, PVC (Polyvinyl Chloride) for the bedding and sheathing and Steel Wire for the armouring.
Not only does the Steel Wire Armour provide a method of mechanical protection, meaning it is suitable for installation into highly-corrosive environments, the armour also provides a form of CPC (Circuit Protective Conductor) meaning it can be used as an earth for the cable. This means that an earth core/cable is not required although it is still recommended as an extra safety measure.
No. of cores / size of cable – 4
Approx overall diameter – 18.7mm
Approx weight (m) – 0.75Kg
Conductors – Plain Annealed Stranded Copper
Insulation – Cross-Linked Polyethylene (XLPE)
Bedding – PVC
Armour / Protection – Steel Wire
Sheath / Jacket – PVC
Colour – Black
Application – Primarily found within powered networks and providing mains electricity to powered devices.
Voltage Rating – 600/1000Vt
₦23,750.00
CompareBased on 0 reviews
Be the first to review “10mm x 4Core Armoured Cable Coleman”
-
WIRE CABLE TRAY & CABLE LADDER
150mm X 50mm Nigeria made Galvanized Cable Tray By 2.5 Meter
Embedded perforations for : – extra load capacity – better aeration – better stability – better condensation drainage Alternative perforations for : – better fixation on the supports – very useful for cable fixation -Standard finish Galvanized
SKU: N150x50 -
CHANGEOVER SWITCHES, Electro, GEAR SWITCHES & CHANGEOVER
Standard 400Amps Changeover Switch
Features:
DMC terminal blocks are provided for cable termination having excellent mechanical, thermal and dielectric properties.
Side Handle Operation.
The enclosure is made of sheet steel suitable for individual mounting.
Terminals suitable for both Al. & Cu conductors.
Adequate knockouts provided for entry of cables.
Door interlocking facility provided.
mounting holes for switch ratings upto 320A and mounting brackets
for switch rating of 400A and above.SKU: Standard400 -
SOLAR POWERED
Solar Power Systems 150W/36V
*solar panel: 150W/36V *2
*battery: 12V/100AH *4
*controller: 24V/15A
*inverter: 24V/600W sine wave * Multiple AC and DC output interface to achieve multiple
purposes: 1*24V DC,1*20V DC, 1*12V DC, 2*5V USB,
3* 220V AC..
*Electricity generated per day: Approximately 0.9KWH in
sunny weather. * Electricity consumed per day: Maximum power
consumption 3.6 KWH.
*Total power consumption of loads should not exceed
480W per hour
*AC Adapter : Input AC100-240V,output DC28V/8A, by
option.SKU: 1556 -
ELECTRICAL FITTINGS, Electro, FLUORESCENT FITTINGS
Fluorescent Fitting Philip without lamps 4ft Single Philips
ELECTRICAL FITTINGS, Electro, FLUORESCENT FITTINGSFluorescent Fitting Philip without lamps 4ft Single Philips
1. Effective, high-quality batten for a single fluorescent lamp; suitable for both direct and indirect lighting applications
2. Integrated slim HF electronic ballast for compactness
3. Easy fixing to ceiling with baseplate on which all the electrical and mechanical components are mounted
4. Low Energy Consumptiom
5. Fluorescent Tube IncludedSKU: fitting1
There are no reviews yet.