Each Armored cable contains high strength, good bending performance, no gel, easy to be connected and operated on with buffer design, independent strength member and sheath to prevent damage from environmental and mechanical stress. Outer jacket’s colors varies according to the types of optical fibers (indoor use), black color is recommended for outdoor use, options for other colors available upon request.
185mm x 4Core Armoured Cable (Nigerchin Cable and Wire)/Per meter
185mm 4 Core Armoured Cable is a size and type of steel wire armoured cable. Primarily found in large powered networks and underneath roadways supplying mains electricity to large buildings. It can also be found within the transport industry, specifically railways powering the trains and buildings located beside the tracks. Due to the size of this cable, it is perfectly suitable for large amounts of power running through it on a daily basis, 24 hours a day.
The best solution to this issue would be to buy a length of earth cable that matches the length of the Armoured Cable. This would negate the steel wire from being used as an earth, meaning it is a safer alternative.
185mm 4 Core Armoured Cable is constructed from the following materials;
– Plain Annealed Stranded Copper for the cores
– Cross-Linked Polyethylene for the Insulation
– PVC (Polyvinyl Chloride) for the bedding and sheathing
– Steel Wire for the armour protecting the insulating layers beneath.
– Voltage Rating – 600/1000Vt
₦138,000.00
CompareBased on 0 reviews
Be the first to review “185mm x 4Core Armoured Cable (Nigerchin Cable and Wire)/Per meter”
-
DISTRIBUTION BOARDS, Electro, PANEL BOARDS
Automatic Transfer Switch Panel (prices & sizes on request)
DISTRIBUTION BOARDS, Electro, PANEL BOARDSAutomatic Transfer Switch Panel (prices & sizes on request)
• 3 Phase (4 Pole).
• 125A AC1 rated
• Auto/Test Selector Switch.
• 240V Auxiliary Terminals.
• Failure or Phase Failure Relay with under/over voltage
• Generator Warm-Up Timer, user adjustable between 0.3 Sec & 30 hours.
• Generator Cool-Down Timer, user adjustable between 0.3 Sec & 30 hours.
• Mains Available LED.
• Mains On Load LED.
• Generator Available LED.
• Generator On Load LED.
• Generator Auto Start connections.
• IP65 rated steel enclosure
100Amp Fuse And Base
100 Amp Ceramic Fuse and Base New brand with high quality Product Description Mainly used for protecting the electrical circuit against overload and short-circuits. Protection against overload and short circuit in electric lines.SKU: 285 -
DISTRIBUTION BOARDS, DISTRIBUTION BOARDS
Hager 4 Way 100A Single Phase Consumer Units DB C/W MCB
Features
These are most elegantly designed DBs, to suit the decor of homes
Raised neutral link for easy wiring
Spring loaded outer cover swings open by just pressing the lock as in case of Elegance series.
Supplied with masking sheet to protect components from cement during plastering
Supplied with neutral & earth link, top & bottom detachable platesSKU: 266 -
CIRCUIT BREAKERS
TeSys Schneider Electric Overload Relays 18 – 23amps
3-pole relays with screw clamp terminals
These overload relays are designed for the protection of motors. They are
compensated and phase failure sensitive. Resetting can either be manual or
automatic.
Direct mounting: under the contactor for versions with screw clamp terminals only;
pre-wired terminals, see pages B11/28 and B11/30.
Separate mounting: using terminal block LA7 K0064 (see below).
On the front face of the overload relay:
b selection of reset mode: Manual (marked H) or Automatic (marked A),
b red pushbutton: Trip Test function,
b blue pushbutton: Stop and manual Reset,
b yellow trip flag indicator: overload relay tripped.
Protection by magnetic circuit breaker GV2 LE, see pages A6/11 and A6/20.SKU: Overload7 -
Electro, SOCKETS, SOCKETS & SWITCHES
Eaton-MEM 13 Amp Single Switched Socket
Eaton’s Moulded Accessory Range is manufactured in a robust, high quality thermoplastic. The range offers a comprehensive selection of solutions that combine reliability and durability with quick and simple installation. Designed with colour matching and aesthetics in mind, the range boasts an appealing front plate design. This enables easy side-by-side mounting of switches and sockets. Screw caps are provided to conceal fixing screws to give a clean finish.
Material: PVC Color: white. Number of gangs:1 Socket: 3 pin plug Amps: 13A. Power Voltage Supply:240V
SKU: 1501 -
CIRCUIT BREAKERS, DISTRIBUTION BOARDS, Electro
ABB SACE Tmax XT1B 160 Breaker 32A
A complete range of moulded case circuit-breakers up to 3200 A.
All the circuit-breakers, both three-pole and four-pole, are available in the fixed version; sizes T4 and T5 in the plug-in version and T4, T5, T6, and T7 also in the withdrawable one.
* High breaking capacity in compact dimensions
High values of short circuit breaking capacity are guaranteed at different voltage levels, without compromising overall dimensions.* Flexibility of use
Thermomagnetic and electronic trip units are available for use in AC/DC or in AC only. It is possible to interchange trip units keeping the
same breaking part, so that installation can be upgraded with fewer costs.* Advanced protection
A complete range of electronic trip units is suitable for different level of protection, even enhancing selectivity values with Early Fault
Detection and Prevention algorithm.SKU: ABB TXB3
There are no reviews yet.