Our Retro Dome chrome spot indoor ceiling light features three headlamp-style directional spotlights housed in a round ceiling fitting. Easy to angle, these three lights can be manoeuvred in order to light up every corner of your room from one central point. The indoor ceiling light has a high-shine chrome finish so classic and simple it will never go out of style, making it perfect for kitchens, living rooms, dining rooms and hallways alike. The light has a 13cm drop and a width of 23cm and requires mains supply, wiring and some assembly, for which full instructions are provided. This spotlight ceiling light fitting takes three GU10 50W spot bulbs, which are included. Please note: this light fitting is not suitable for bathrooms. Always read instructions.
3 Arm Dome Spotlight Ceiling Light Silver
‘-For your safety, this product must be installed in accordance with local Building Regulations. If in any doubt, or where required by law, consult a competent person who is registered with an electrical self- certification scheme. Further information is available online or from your local authority-
₦0.00
CompareBased on 0 reviews
Be the first to review “3 Arm Dome Spotlight Ceiling Light Silver”
-
ACCESSORIES
APC 1500 SMART UPS
APC Back-UPS 1400VA, 230V, AVR, IEC Sockets
Battery Backup & Surge Protector for Electronics and Computers
Includes : User Manual1. Cold-start capable: Provides temporary battery power when the utility power is out.
2. Energy meter: Provides actual kilowatt hours of usage for energy conscious users.
3. Green mode: Patent-pending operating mode that bypasses unused electrical components in good power conditions to achieve very high operating efficiency without sacrificing any protection.
4. High online efficiency: Reduces utlility costs, generates less heat.
5. Intuitive LCD interface: Provides clear and accurate information in multiple languages with the ability to configure the UPS locally with easy to use navigation keys.
6. Predictive replace battery date: Dynamically provides the month and year when battery replacement is recommended to aide in long term maintenance planning.
7. Pure sine wave output on battery: Simulates utility power to provide the highest degree of compatibility for active PFC (power factor corrected) servers and sensitive electronics.
8. Single switched outlet group: Single outlet group that may be controlled separately from the UPS for discrete reboot of hung devices, sequenced on/off and non-critical load shedding.
9. SmartSlot: Customize UPS capabilities with management cards.
10. Temperature-compensated battery charging: Prolongs battery life by regulating the charge voltage according to battery temperature.Availability:
1. Automatic restart of loads after UPS shutdown: Automatically starts up the connected equipment upon the return of utility power.
2. Automatic self-test: Periodic battery self-test ensures early detection of a battery that needs to be replaced.
3. Intelligent battery management: Maximizes battery performance, life, and reliability through intelligent, precision charging.
4. Disconnected battery notification: Warns when a battery is not available to provide backup power.
5. Boost and Trim Automatic Voltage Regulation (AVR): Gives higher application availability by correcting low and high voltage conditions without using the battery (not available on all models).
6. Temperature-compensated battery charging: Prolongs battery life by regulating the charge voltage according to battery temperature.
7. Power conditioning: Protects connected loads from surges, spikes, lightning, and other power disturbances.Adaptability:
1. Adjustable voltage-transfer points: Maximizes useful battery life by widening the input voltage window or tightening the output voltage regulation.
2. Adjustable voltage sensitivity: Provides the ability to adapt the UPS for optimal performance in specific power environments or generator applications.SKU: APC1500 -
CIRCUIT BREAKERS
TeSys Schneider Electric Overload Relays 1.6 – 2.5amps
3-pole relays with screw clamp terminals
These overload relays are designed for the protection of motors. They are
compensated and phase failure sensitive. Resetting can either be manual or
automatic.
Direct mounting: under the contactor for versions with screw clamp terminals only;
pre-wired terminals, see pages B11/28 and B11/30.
Separate mounting: using terminal block LA7 K0064 (see below).
On the front face of the overload relay:
b selection of reset mode: Manual (marked H) or Automatic (marked A),
b red pushbutton: Trip Test function,
b blue pushbutton: Stop and manual Reset,
b yellow trip flag indicator: overload relay tripped.
Protection by magnetic circuit breaker GV2 LE, see pages A6/11 and A6/20.SKU: Overload3 -
ENERGY SAVING BULBS, FLUORESENT TUBES, LIGHT BULBS, LIGHTING
Compact fluorescent lamp lamp Sylvania the CF D 13W/G24d – 1/840
ENERGY SAVING BULBS, FLUORESENT TUBES, LIGHT BULBS, LIGHTINGCompact fluorescent lamp lamp Sylvania the CF D 13W/G24d – 1/840
PRODUCT FEATURES
– Compact and high performance double bend 2-bend pin lamp,
– Suitable for operation on elecronic control gear (DE type) and magnetic ballast (D version),
– Dimmable with suitable dimmer,
– Excellent colour rendering,
– Suitable for emergency lightingWatt (Rated) (W) – 13watt
General application – Education, Hospitality, Logistics & Industry, Museums & Galleries, Office, Retail, Residential & ConsumerSKU: LYNX-D -
SOLAR POWERED
Solar Lighting Kits
Solar Panel: 5W/18V with 6M cable
Lamp: 2Pcs super bright 3W LED lamp wih 5M cable
USB interface: USB output can charge for mobile phone, MP3, MP4, etc
Charging time: About 11-12 hours(by solar panel) about 3-4hours(by adapter)
Lighting time: 2Pcs 3W LED 6-7 hours when the battery is fully charged.
AC Adapter: Input AC100-240V,output DC16V/2A,by option.SKU: 1534
There are no reviews yet.