Making the lay of the electric wire, electric cable and pipeline achieved the universalized level. our combustion-proof pvc trunking has strength tenacity,and are combustion-proof,fire proofing,damp proof,acerbity resistant,aging resistance.
40 x 25mm PVC Trunking
* N450.00 (per length)
The advantages of PVC Wire Duct:
1. Low cost, significant cost savings compared to standard traditional tray products.
2. Light in weight, wide range of sizes.
3. Fast heat dispersion.
4. Strong enough to withstand short circuits. Provides strength, rigidity without additional hardware.
5. Adapts to difficult architectural designs to accommodate changes in direction and elevation of cable runs.
6.Flexible, easy and fast installation. Design allows cable exit or entry at any point.
7. Cables can be secured to clamps or ties.
8.Various hardware accessories available to fix, support and install.
9. Safe smooth edge design to protect cable.
10.Easy for line check and cleaning , easy maintained.
₦1,200.00
CompareBased on 0 reviews
Be the first to review “40 x 25mm PVC Trunking”
-
-
DISTRIBUTION BOARDS, DISTRIBUTION BOARDS, Electro
6way Single Phase Eaton-MEM Consumer Unit Distribution Board C/W MCb
DISTRIBUTION BOARDS, DISTRIBUTION BOARDS, Electro6way Single Phase Eaton-MEM Consumer Unit Distribution Board C/W MCb
Features These are most elegantly designed DBs, to suit the decor of homes Raised neutral link for easy wiring Spring loaded outer cover swings open by just pressing the lock as in case of Elegance series. Supplied with masking sheet to protect components from cement during plastering Supplied with neutral & earth link, top & bottom detachable plates
SKU: 253 -
DISTRIBUTION BOARDS, DISTRIBUTION BOARDS, Electro
Haus-Storm Distribution Board
Features
Compact Distribution Board which occupy minimum space
Raised neutral link for easy wiring
Suitable for surface & fush mounting
Detachable din bar with end stoppers for easy assembly of breakers
Supplied with fully shielded bus-bars
Level marks for providing indication for fitment in wall
Supplied with neutral & earth link, top & bottom detachable plates
Supplied with masking sheet to protect components from cement during plasteringSKU: 269 -
CIRCUIT BREAKERS
TeSys Schneider Electric Overload Relays 30 – 40amps
3-pole relays with screw clamp terminals
These overload relays are designed for the protection of motors. They are
compensated and phase failure sensitive. Resetting can either be manual or
automatic.
Direct mounting: under the contactor for versions with screw clamp terminals only;
pre-wired terminals, see pages B11/28 and B11/30.
Separate mounting: using terminal block LA7 K0064 (see below).
On the front face of the overload relay:
b selection of reset mode: Manual (marked H) or Automatic (marked A),
b red pushbutton: Trip Test function,
b blue pushbutton: Stop and manual Reset,
b yellow trip flag indicator: overload relay tripped.
Protection by magnetic circuit breaker GV2 LE, see pages A6/11 and A6/20.SKU: Overload5
There are no reviews yet.