This contemporary five-arm chandelier will be a chic and understated centrepiece for any room. It features five chunky, squared-off, chrome-effect arms that, starting bunched together at the top, separate to sweep down and out at the bottom, where each candle is seated in a flat clear holder. The five-arm light fixture is for indoor use only and has a 33cm drop and a width of 54cm. It requires wiring and some assembly, for which full instructions are provided. This electric chandelier takes five SES (E14) 40W candle bulbs, or 9W energy savers, which are not included. Please note: this light fitting is not suitable for bathrooms. Always read instructions.
5 Arm Chandelier Chrome Ceiling Light Fitting
-For your safety, this product must be installed in accordance with local Building Regulations. If in any doubt, or where required by law, consult a competent person who is registered with an electrical self-certification scheme. Further information is available online or from your local authority-
₦0.00
CompareBased on 0 reviews
Be the first to review “5 Arm Chandelier Chrome Ceiling Light Fitting”
-
ARMOURED CABLE, ELECTRICAL INDUSTRIAL
70mm x 4Core Amroured Cable (Kablemetal Nexans Nigeria)
70mm 4 Core Armoured Cable is a size and type of steel wire armoured cable. Primarily found in large powered networks and underneath roadways supplying mains electricity to large buildings. It can also be found within the transport industry, specifically railways powering the trains and buildings located beside the tracks. Due to the size of this cable, it is perfectly suitable for large amounts of power running through it on a daily basis, 24 hours a day.
The best solution to this issue would be to buy a length of earth cable that matches the length of the Armoured Cable. This would negate the steel wire from being used as an earth, meaning it is a safer alternative.
70mm 4 Core Armoured Cable is constructed from the following materials;
– Plain Annealed Stranded Copper for the cores
– Cross-Linked Polyethylene for the Insulation
– PVC (Polyvinyl Chloride) for the bedding and sheathing
– Steel Wire for the armour protecting the insulating layers beneath.
No. of cores / size of cable – 4
Approx overall diameter – 36.8mm
Approx weight (m) – 4.23Kg
Conductors – Plain Annealed Stranded Copper
Insulation – Cross-Linked Polyethylene
Bedding – Polyvinyl Chloride
Armour / Protection – Steel Wire
Sheath / Jacket – Polyvinyl Chloride
Colour – Black
Application – Primarily found in large powered networks as well as buried underneath roads supplying mains electricity to large buildings etc.
Voltage Rating – 600/1000VtSKU: 1521 -
Electro, HOME&OFFICE LIGHTING, LIGHTING, SPOTLIGHTS
3 Arm Spot Dome White
‘-For your safety, this product must be installed in accordance with local Building Regulations. If in any doubt, or where required by law, consult a competent person who is registered with an electrical self-certification scheme. Further information is available online or from your local authority
SKU: 224 -
ACCESSORIES, ELECTRICAL INDUSTRIAL
Industrial Extension, 2.5mm x 50mtr – 3way – Brennenstuhl
FEATURES:
– Ergonomic cable guide handle for perfect cable-management during winding
– With thermal cut-out protection against overheating or overload
– Safety Cut Out.
– Nominal current: 13 A.
– Suited for 50 meters of cable.
– Equipped with 3 sockets with self closing covers.
– Protection against overheating.
– Indicator light to prevent overheating.
– Voltage: 220 – 240V
– Made in GermanySKU: extension2 -
Electro, ENERGY SAVING BULBS, LIGHT BULBS, LIGHTING
Osram E27(Screw) 18W Energy Saving Bulb
Compact fluorescent lamps by OSRAM has high level of economy. They have an impressive average service life up to 20 times longer and consume considerably less energy by up to 80%. Because of their higher efficiency they can be operated very economically and soon make pay for themselves.
Compact fluorescent lamps by OSRAM also reduce CO2 emissions in comparison to similar incandescent lamps by up to 80 % – an active contribution to climate protection combined with incredible cost reduction.SKU: 759 -
CIRCUIT BREAKERS
TeSys Schneider Electric Overload Relays 4-6amps
3-pole relays with screw clamp terminals
These overload relays are designed for the protection of motors. They are
compensated and phase failure sensitive. Resetting can either be manual or
automatic.
Direct mounting: under the contactor for versions with screw clamp terminals only;
pre-wired terminals, see pages B11/28 and B11/30.
Separate mounting: using terminal block LA7 K0064 (see below).
On the front face of the overload relay:
b selection of reset mode: Manual (marked H) or Automatic (marked A),
b red pushbutton: Trip Test function,
b blue pushbutton: Stop and manual Reset,
b yellow trip flag indicator: overload relay tripped.
Protection by magnetic circuit breaker GV2 LE, see pages A6/11 and A6/20.SKU: Overload1
There are no reviews yet.