The patented cable tray system is designed to be stronger, optimally stack able and transportable, quick to install, with random overlap and exceedingly safe.
50mm x 50mm Nigeria made Galvanized Wire Cable Tray By 2.5 Meter
Embedded perforations for : – extra load capacity – better aeration – better stability – better condensation drainage Alternative perforations for : – better fixation on the supports – very useful for cable fixation -Standard finish Galvanized
₦2,750.00
CompareBased on 0 reviews
Be the first to review “50mm x 50mm Nigeria made Galvanized Wire Cable Tray By 2.5 Meter”
-
ARMOURED CABLE, ELECTRICAL INDUSTRIAL, Electro
25mm 4 Core Amroured Cable|Per Meter (Kablemetal Nexans Nigeria)
ARMOURED CABLE, ELECTRICAL INDUSTRIAL, Electro25mm 4 Core Amroured Cable|Per Meter (Kablemetal Nexans Nigeria)
25mm 4 Core Armoured Cable is a form of electrical cable that is commonly found carrying mains electricity to power networks, devices and buildings. It can also be found within industries such as railway and transport, as well as on pilons carrying mains electricity to houses and factories.
The construction is commonly identified by the following:-
– Plain Annealed Stranded Copper for the conductors/cores
– Cross-Linked Polyethylene (XLPE) for the insulation
– PVC (Polyvinyl Chloride) for the bedding and sheathing of the cable
– Steel Wire Armour to protect the insulating layers beneath.
No. of cores / size of cable – 4
Approx overall diameter – 26.1mm
Approx weight (m) – 1.9Kg
Armour / Protection – Steel Wire
Sheath / Jacket – PVC
Colour – Black
Voltage Rating – 600/1000VtSKU: 307 -
Electro, HOME&OFFICE LIGHTING, LIGHTING, SPOTLIGHTS
3 Arm Dome Spotlight Ceiling Light Silver
‘-For your safety, this product must be installed in accordance with local Building Regulations. If in any doubt, or where required by law, consult a competent person who is registered with an electrical self- certification scheme. Further information is available online or from your local authority-
SKU: 223 -
ELECTRICAL INDUSTRIAL, TRANSFORMER
ABB Transformer 500KVA 11/400KV
Distribution transformers are typically oil-immersed and suitable for pole-, pad- or ground-mounting. They represent an economical option for certain networks, particularly those with low population densities.
Depending upon requirements, transformers may be connected between two phases of a three-phase system (two high voltage bushings) or from one phase to ground (single high voltage bushing).
The units are suitable for residential overhead distribution loads, as well as light commercial or industrial loads and diversified power applications.
Product scope
- Primary voltage: 500kva
- Typical fluid: mineral oil
SKU: dts50011 -
LED DRIVERS
Philips Xitanium 50W 230V LED DRIVER Philip
Eco passport – Our environmental product specifications overview
Philips cares about the environment and society at large, and strongly supports eco-design of products.Specifications
General Characteristics:
Housing – [Not Specified]
Lifetime – 50000 hr
Input Frequency – 50/60 Hz
Relative Humidity – 10 (min), 90 (max) %
IP Classification – 20
Lifetime 90% surv.@Tcaselife – 50000 hr
System Description – TD/TE [Touch&DALI/Trailing edge dimming]
Number of LEDs – xOperating Characteristics
12V output – Yes
Ripple current – 20 %
Efficiency Range – 88-90 %
Power Factor Range – 0.9
Output Power Range – 15-50 W
Power Factor (100% load) – 0.9 (min) –
Output Voltage Range – 31-62 V
Output Current Range (mA) – 300-1000
Dimming range – 100-10 %
Dimmable – Yes
Input Voltage Range (DC) – 186-250 V
Inrush Current Peak – 48 (max) A
Output Current Tolerance – -5 (min), 5 (max) %
Inrush Current Width to 50% – 180 us
Type of Dimming – Touch&DALI and trailing edge
Input Voltage Range (AC) – 220-240 V
Earth leakage current – 0.7 (max) mA
Max drivers on MCB(16A type-B) – 12 (max) x
Control input protection – Yes (Basic insulation)Wiring Characteristics
Connection on driver to L2 – JST connector
Hot wiring – Yes
Connector type input terminal – Wago 250
Connector type output terminal – Wago 250Product Dimensions
Length A1 – 140.0 mm
Width B1 – 75 mm
Height C1 – 32 mm
Fixing Hole Diameter D1 – 4.5 mm
Fixing Hole Distance Width B2 – 63.7 mm
Fixing Hole Distance Length A2 – 128.5 mmSKU: Philip Driver1 -
Electro, ENERGY SAVING BULBS, LIGHT BULBS, LIGHTING
Torch B22 (Pin) 9W Energy Saving Bulb
Specifications:
• Optional wattage: 7-105W
• Operating voltage: 110 to 130V or 220 to 240V
• Frequency: 50/60Hz
• Average lifetime: 6000hrs/8000 hrs/10000hrs available
• Optional base: E27/B22/E14
• Optional Color Temperature: 2,700K/4,100K/6,500KApplications:
Shopping malls, table lamps, pendent lamps, supermarkets, restaurants, shops, hotels etc.SKU: 2000 -
ELECTRICAL INDUSTRIAL, Electro, WIRE CABLE TRAY & CABLE LADDER
200mm x 50mm Foreign Original Galvanized Wire Merge Cable Tray By 3 Meter
ELECTRICAL INDUSTRIAL, Electro, WIRE CABLE TRAY & CABLE LADDER200mm x 50mm Foreign Original Galvanized Wire Merge Cable Tray By 3 Meter
Cable tray are the most common solution for supporting and routing of cables in an installation.
For this reason, cable tray are available in a variety of sizes and standards, in order to cover the
wide range of applications.Embedded perforations for :
– extra load capacity
– better aeration
– better stability
– better condensation drainage
-50x300mmAlternative perforations for :
– better fixation on the supports
– very useful for cable fixation
-Standard finish GalvanizedSKU: 294
There are no reviews yet.