ABB offers a complete range of copper distribution transformers designed to grant the reliability, durability, and efficiency required in utility,
ABB 1.5KVA 11/400KV Distribution Transformer
Distribution transformers are typically oil-immersed and suitable for pole-, pad- or ground-mounting. They represent an economical option for certain networks, particularly those with low population densities.
Depending upon requirements, transformers may be connected between two phases of a three-phase system (two high voltage bushings) or from one phase to ground (single high voltage bushing).
The units are suitable for residential overhead distribution loads, as well as light commercial or industrial loads and diversified power applications.
Product scope
- Primary voltage: up to 36 kV
- Typical fluid: mineral oil
₦48,800,000.00
CompareWeight | 2 kg |
---|
Based on 0 reviews
Be the first to review “ABB 1.5KVA 11/400KV Distribution Transformer”
-
CHANGEOVER SWITCHES, Electro, GEAR SWITCHES & CHANGEOVER
100Amp Knife Switch
Type A, single-throw and double-throw, non-fusible knife switches have a corrosion resistant finish, are mounted on GPO-3 bases and have high clips and hinges. The high clips and hinges simplify the front-of-board connections. Available 30 Amp thru 2000 Amp.
Fusible Type A knife switches are arranged with fuse holders which will accept standard code fuses. When mounted on a panel the single-throw switch is fusible at the bottom. Available 30 Amp through 600 Amp at 250, 480 or 600 volt.SKU: 781 -
CHANGEOVER SWITCHES, Electro, GEAR SWITCHES & CHANGEOVER
STANLEY 200A Changeover
Stanley Products always provides new technology for all industrial requirements, with excellent value for their investments. You can depend upon for matchless quality on all Stanley Products. Our new range products in sheet metal Side Handle Operating Changeover are made as per industrial requirements with powder coating. This certificate of “Stanley” original products, issued with the assurance as the same has been manufactured in accordance with requirement of IEC-60947-3 (2005-06). Quality system, standards and mechanism has been tested satisfactory to the specific test as follows: 1. Dielectric Test 2. Mechanical Operation Test 3. High Voltage Test 4. Insulation Resistance Test 5. Temperature Rise Test 6. Mini Volt Drop Test STANLEY 200A Changeover
SKU: 1576 -
-
CEILING LIGHTS, Electro, HOME&OFFICE LIGHTING, LIGHTING
Flush Fitting Ceiling Light Chrome Effect
This flush-fitted domed chrome frosted ceiling light takes either a GLS ES 42W halogen bulb, or a 12W energy saver, which are not included. Flush fitting ceiling light fitting. Wiring required. Maximum 1x 42W E27 GLS Halogen ES bulb or 12W energy saving bulb required. Bulb not included. Suitable for use in bathrooms excluding zone 0,1,2. For indoor use only. Always read instructions.
SKU: 1391
There are no reviews yet.