ABB offers a complete range of copper distribution transformers designed to grant the reliability, durability, and efficiency required in utility,
ABB 1000KVA 33/400KV Distribution Transformer
Distribution transformers are typically oil-immersed and suitable for pole-, pad- or ground-mounting. They represent an economical option for certain networks, particularly those with low population densities.
Depending upon requirements, transformers may be connected between two phases of a three-phase system (two high voltage bushings) or from one phase to ground (single high voltage bushing).
The units are suitable for residential overhead distribution loads, as well as light commercial or industrial loads and diversified power applications.
Product scope
- Primary voltage: up to 36 kV
- Typical fluid: mineral oil
₦43,953,868.27
CompareWeight | 2 kg |
---|
Based on 0 reviews
Be the first to review “ABB 1000KVA 33/400KV Distribution Transformer”
-
Electro, HOME&OFFICE LIGHTING, LIGHTING, SPOTLIGHTS
3 Arm Spot Dome White
-For your safety, this product must be installed in accordance with local Building Regulations. If in any doubt, or where required by law, consult a competent person who is registered with an electrical self-certification scheme. Further information is available online or from your local authority
SKU: 224 -
OUTDOOR LIGHTS
Vellmax 100W LED Flood Light Outdoor Landscape Lamp IP65 Cool White
Features:
Ceiling Down Light has high efficiency light distribution technology, high light distribution
High luminous efficiency, about 80%-90% light utilization rate
Green and environmental-friendly: No UV or IR radiation
Multifunctional design for Lighting and decoration
Safe and easy to assemble
Low power consumptionSpecifications:
Overall Size: 13-1/2″L x 11-4/5″W x 3-1/3″H
Waterproof:IP65
Wattage:100W
Power Input:85-265V
Plug: WhitoutSKU: Flood1 -
CIRCUIT BREAKERS
TeSys Schneider Electric Overload Relays 1.6 – 2.5amps
3-pole relays with screw clamp terminals
These overload relays are designed for the protection of motors. They are
compensated and phase failure sensitive. Resetting can either be manual or
automatic.
Direct mounting: under the contactor for versions with screw clamp terminals only;
pre-wired terminals, see pages B11/28 and B11/30.
Separate mounting: using terminal block LA7 K0064 (see below).
On the front face of the overload relay:
b selection of reset mode: Manual (marked H) or Automatic (marked A),
b red pushbutton: Trip Test function,
b blue pushbutton: Stop and manual Reset,
b yellow trip flag indicator: overload relay tripped.
Protection by magnetic circuit breaker GV2 LE, see pages A6/11 and A6/20.SKU: Overload3
There are no reviews yet.