Execution: Single pole, Double pole, Three pole, Four pole, SPN,TPN
Range: 10,15,20,30,40,63,80,100,125 etc Amp
Trip Free mechanism10KA short circuit breaking capacity for B and C Low power consumption,thus cost effective and energy savingFinger safe terminal IP20 degree of protectionDual Terminal Facility15 Plate Arc chute for effective arc quenchingsilver graphite contacts for enhance lifeAccessories switchPerformance and safetyPositive contact indicatorReliability and continuity of serviceSuitable for both DESB and switch boardShort Circuit breaking capacity 3KA MCBProtection against overload and short Circuit breaking capacity 3KA
₦20,000.00
CompareExecution: Single pole, Double pole, Three pole, Four pole, SPN,TPN
Range: 10,15,20,30,40,63,80,100,125 etc Amp
3-pole relays with screw clamp terminals
These overload relays are designed for the protection of motors. They are
compensated and phase failure sensitive. Resetting can either be manual or
automatic.
Direct mounting: under the contactor for versions with screw clamp terminals only;
pre-wired terminals, see pages B11/28 and B11/30.
Separate mounting: using terminal block LA7 K0064 (see below).
On the front face of the overload relay:
b selection of reset mode: Manual (marked H) or Automatic (marked A),
b red pushbutton: Trip Test function,
b blue pushbutton: Stop and manual Reset,
b yellow trip flag indicator: overload relay tripped.
Protection by magnetic circuit breaker GV2 LE, see pages A6/11 and A6/20.
Rechargeable Solar fan with LED lamp and AC 220V adapter
(1) 400MM fan blades 21LEDs; Fan Height:120CM;
(2) 2 maintenance free lead-acid batteries 6V4.0Ah*2;
(3) 3 level controller H:1350RPM?M:1150RPM;L:1000RPM;
(4) a wide-angle air supply; the level of directional adjustment;
(5) After charged it can works 3.5hrs for high speed,6hrs for low speed?
(6) Case Material ABS+PP+ Rail?Surface Treatment
(7)charging method:AC110V/220V;charging time:6~8hrs
(8)The AC adapter can also charge the battery while the fan is working ,and the light turns green when the batteris are full.
Features
* Device Mounting – Flush
* Product or Component Type – Distribution Board
* Product Range – Disbo
* Number of Phases – 1 Phase
* Type of Inomer – 2P Isolator 63A
* Number of Ways – 10 Way
Benefits:
– Spectacular Design – Blends seamlessly with interiors
– Maximized Wiring Space – Convenient and Safe wiring
– Adaptable – Total Flexibility for ease of installation and usage
– Robust Architecture – Perfect blend of Strength & WeightTechnically Proven – Safety Guaranteed
– Technically Proven – Safety Guaranteed
Applications:
It is housing to mount multiple electrical Modular devices (like MCBs, RCCBs, Surge Protection Devices, Change over switch, Isolators, indicating devices etc.) used for distribution, protection , control and automation at final distribution level.
1.Solar Panel:10W/18V with 6M cable
2.Lamp:4PCS super bright 3W LED lamp wih 5M cable
3.USB interface:USB output can charge for mobile phone,MP3,MP4,ect
4.Charging time:About 10-11 hours(by solar panel)
about 5-6hours(by adapter)
5.Lighting time?4PCS 3W LED 6-7 hours when the battery is fully charged.
There are no reviews yet.