ABB Transformer 300KVA 33/400KV
Distribution transformers are typically oil-immersed and suitable for pole-, pad- or ground-mounting. They represent an economical option for certain networks, particularly those with low population densities.
Depending upon requirements, transformers may be connected between two phases of a three-phase system (two high voltage bushings) or from one phase to ground (single high voltage bushing).
The units are suitable for residential overhead distribution loads, as well as light commercial or industrial loads and diversified power applications.
Product scope
- Primary voltage: 300KV
- Typical fluid: mineral oil
₦23,814,449.80
Compare-
ARMOURED CABLE, ELECTRICAL INDUSTRIAL, Electro
35mm 4Core Amroured Cable|Per Meter (Kablemetal Nexans Nigeria)
ARMOURED CABLE, ELECTRICAL INDUSTRIAL, Electro35mm 4Core Amroured Cable|Per Meter (Kablemetal Nexans Nigeria)
35mm 4 Core Armoured Cable is a variant of electrical cable that is commonly found within powered networks as well as supplying mains voltage to multiple powered devices etc. It is used in a wide variety of electrical applications but at this size, it is commonly found within industrial compounds such as power stations and building sites.
This cable is identified by the following method of construction;
– Plain Annealed Stranded Copper for the cores/conductors
– XLPE (Cross-Linked Polyethylene) for the insulation
– PVC (Polyvinyl Chloride) for the sheathing and bedding
– Steel Wire for the armouring that protects the insulating layers beneath.
As well as a form of mechanical protection, therefore suitable for outdoor use and underground installations, the steel wire armour also acts a CPC (Circuit Protective Conductor), meaning it acts as a natural earth for the cable therefore an earth core or seperate length of earth cable is not required.
– No. of cores / size of cable – 4
– Approx overall diameter – 28.8mm
– Approx weight (m) – 2.3Kg
– Conductors – Plain Annealed Stranded Copper
– Insulation – Cross-Linked Polyethylene
– Bedding – Polyvinyl Chloride
– Armour / Protection – Steel Wire
– Sheath / Jacket – Polyvinyl Chloride
– Application – Used within large powered networks & for providing mains electricity to multiple powered devices.
– Voltage Rating – 600/1000VtSKU: 310 -
ACCESSORIES, ELECTRICAL INDUSTRIAL
Ariston Water Heater – 30 Litres
ELECTRIC WATER HEATERS
Featuring a unique design, small size and new features, Ariston electric and gas water heaters are now even more efficient and easy to use. From the advantageous energy and cost savings to the variety of models in the line, superior Ariston quality water heaters are accessible to all.Wall-hung electric storage water heater can be installed over or under the sink.
SKU: Ariston4 -
ARMOURED CABLE, ELECTRICAL INDUSTRIAL
10mm x 4Core Armoured Cable Coleman
Suitable for under and over-ground usage alike, 6mm 4 Core Armoured Cable is a dust and waterproof variant of electrical cable that is commonly found within powered networks and supplying mains electricity to a large variety of devices, both domestic and industrial.
This particular type of cable is constructed using Plain Annealed Stranded Copper for the conductors, XLPE (Cross-Linked Polyethylene) for the insulation, PVC (Polyvinyl Chloride) for the bedding and sheathing and Steel Wire for the armouring.
Not only does the Steel Wire Armour provide a method of mechanical protection, meaning it is suitable for installation into highly-corrosive environments, the armour also provides a form of CPC (Circuit Protective Conductor) meaning it can be used as an earth for the cable. This means that an earth core/cable is not required although it is still recommended as an extra safety measure.
No. of cores / size of cable – 4
Approx overall diameter – 18.7mm
Approx weight (m) – 0.75Kg
Conductors – Plain Annealed Stranded Copper
Insulation – Cross-Linked Polyethylene (XLPE)
Bedding – PVC
Armour / Protection – Steel Wire
Sheath / Jacket – PVC
Colour – Black
Application – Primarily found within powered networks and providing mains electricity to powered devices.
Voltage Rating – 600/1000VtSKU: coleman10mm -
CATRIDGE AND INKS
HP 93A Black Original LaserJet Toner Cartridge (CZ192A)
Overview
Original HP 93 LaserJet Toner Cartridges deliver professional-quality business documents. Stay productive by avoiding wasted time and supplies. These reliable cartridges are specifically designed for your HP LaserJet Pro MFP.
Features
Get the quality you expect, time after time, from Original HP Toner Cartridges. Avoid the reprints, wasted supplies and costly delays that can occur with remanufactured cartridges.Keep your business moving forward. Trust Original HP Toner Cartridges for consistent, uninterrupted printing that keeps you on track and on budget.
Don’t miss a beat. Replace Original HP Toner Cartridges in seconds and go back to printing. They’re specifically designed for your HP LaserJet Pro MFP – with the toner and imaging drum in one easy-to-install supply.
Help conserve resources. Recycle your Original HP Toner Cartridges – it’s easy and free with the HP Planet Partners programme, available in more than 50 countries and territories worldwide.2
Specifications
Color(s) of printing supplies
Black
Print technology
Laser
Page yield (black and white)
12,000 pagesSKU: HP93A
There are no reviews yet.