ABB Transformer 800kVA/33 ABB Cu/Cu Oil Filled Groundmount Transformer
Distribution transformers are typically oil-immersed and suitable for pole-, pad- or ground-mounting. They represent an economical option for certain networks, particularly those with low population densities.
Depending upon requirements, transformers may be connected between two phases of a three-phase system (two high voltage bushings) or from one phase to ground (single high voltage bushing).
The units are suitable for residential overhead distribution loads, as well as light commercial or industrial loads and diversified power applications.
Product scope
- Primary voltage: up to 36 kV
- Typical fluid: mineral oil
₦38,898,261.11
Compare-
ARMOURED CABLE, ELECTRICAL INDUSTRIAL
240mm x 4 Core Armoured Cable (Nigerchin Cable and Wire)
240mm 4 Core Armoured Cable is a variant of steel wire armoured cable used for industrial electrical applications as well as being suitable for direct burial to carry mains electricity to various powered devices. It is also commonly found within powered networks such as within power stations and factories, etc.
This cable is commonly identified by the following construction; plain annealed stranded copper for the cores/conductors, polyvinyl chloride for the bedding and sheathing, cross-linked polyethylene for the insulation, with a steel wire armour protecting the layers beneath.
Although this cable is suitable for powering smaller, more domestic installations such as powering an outdoor shed or house as well as garden/water features, it is most commonly found within more industrial practices, as mentioned previously.
240mm 4 Core Armoured Cable is constructed from the following materials;– Plain Annealed Stranded Copper for the cores
– Cross-Linked Polyethylene for the Insulation
– PVC (Polyvinyl Chloride) for the bedding and sheathing
– Steel Wire for the armour protecting the insulating layers beneath.
– Voltage Rating: 600/1000Vt
SKU: 240mmnigerchin2 -
CHANGEOVER SWITCHES, Electro, GEAR SWITCHES & CHANGEOVER
100Amp Knife Switch
Type A, single-throw and double-throw, non-fusible knife switches have a corrosion resistant finish, are mounted on GPO-3 bases and have high clips and hinges. The high clips and hinges simplify the front-of-board connections. Available 30 Amp thru 2000 Amp.
Fusible Type A knife switches are arranged with fuse holders which will accept standard code fuses. When mounted on a panel the single-throw switch is fusible at the bottom. Available 30 Amp through 600 Amp at 250, 480 or 600 volt.SKU: 781 -
CABLE AND CABLE MANAGEMENT, Electro, SINGLE CORE WIRE
Cutix 2.5mm Single Core Copper Wire
Our cables with PVC (Polyvinyl Chloride) sheathing are used in a vast number of applications from fixed wiring to flexible installations and they are available in various sizes, colours and number of conductors.
SKU: Cutix2.5
There are no reviews yet.