1. Automatic Voltage Regulation (AVR): Automatically steps up low voltage and steps down high voltage to levels that are suitable for your equipment.
2. Telephone dataline surge protection: Provides protection of connected equipment from power surges traveling on telephone lines.
3. USB connection: Use your PC to access additional power protection and management features for your UPS via a USB Port.
4. LED status display: Quickly understand unit and power status with visual indicators.
5. Audible alarms: Provides notification of changing utility power and UPS power conditions
6. Battery-protected and surge-only outlets: Reserves power capacity and run time for connected equipment that require UPS battery back-up while providing surge only protection for less critical equipment
7. Safety-agency approved: Ensures the product has been tested and approved to work safely with the connected service provider equipment and within the specified environment.
8. Battery and surge protected outlets: Back up and protect your hardware and data during power outages, surges and spikes.
9. Surge only outlets: Protect secondary electronics from surges and spikes without reducing battery power used to run primary electronics during an outage.
APC 1500 SMART UPS
APC Back-UPS 1400VA, 230V, AVR, IEC Sockets
Battery Backup & Surge Protector for Electronics and Computers
Includes : User Manual
1. Cold-start capable: Provides temporary battery power when the utility power is out.
2. Energy meter: Provides actual kilowatt hours of usage for energy conscious users.
3. Green mode: Patent-pending operating mode that bypasses unused electrical components in good power conditions to achieve very high operating efficiency without sacrificing any protection.
4. High online efficiency: Reduces utlility costs, generates less heat.
5. Intuitive LCD interface: Provides clear and accurate information in multiple languages with the ability to configure the UPS locally with easy to use navigation keys.
6. Predictive replace battery date: Dynamically provides the month and year when battery replacement is recommended to aide in long term maintenance planning.
7. Pure sine wave output on battery: Simulates utility power to provide the highest degree of compatibility for active PFC (power factor corrected) servers and sensitive electronics.
8. Single switched outlet group: Single outlet group that may be controlled separately from the UPS for discrete reboot of hung devices, sequenced on/off and non-critical load shedding.
9. SmartSlot: Customize UPS capabilities with management cards.
10. Temperature-compensated battery charging: Prolongs battery life by regulating the charge voltage according to battery temperature.
Availability:
1. Automatic restart of loads after UPS shutdown: Automatically starts up the connected equipment upon the return of utility power.
2. Automatic self-test: Periodic battery self-test ensures early detection of a battery that needs to be replaced.
3. Intelligent battery management: Maximizes battery performance, life, and reliability through intelligent, precision charging.
4. Disconnected battery notification: Warns when a battery is not available to provide backup power.
5. Boost and Trim Automatic Voltage Regulation (AVR): Gives higher application availability by correcting low and high voltage conditions without using the battery (not available on all models).
6. Temperature-compensated battery charging: Prolongs battery life by regulating the charge voltage according to battery temperature.
7. Power conditioning: Protects connected loads from surges, spikes, lightning, and other power disturbances.
Adaptability:
1. Adjustable voltage-transfer points: Maximizes useful battery life by widening the input voltage window or tightening the output voltage regulation.
2. Adjustable voltage sensitivity: Provides the ability to adapt the UPS for optimal performance in specific power environments or generator applications.
₦220,000.00
CompareBased on 0 reviews
Be the first to review “APC 1500 SMART UPS”
-
ELECTRICAL INDUSTRIAL, TRANSFORMER
ABB Transformer 300KVA 11/400KV
Distribution transformers are typically oil-immersed and suitable for pole-, pad- or ground-mounting. They represent an economical option for certain networks, particularly those with low population densities.
Depending upon requirements, transformers may be connected between two phases of a three-phase system (two high voltage bushings) or from one phase to ground (single high voltage bushing).
The units are suitable for residential overhead distribution loads, as well as light commercial or industrial loads and diversified power applications.
Product scope
- Primary voltage: 300KV
- Typical fluid: mineral oil
SKU: DTS30011 -
ARMOURED CABLE, ELECTRICAL INDUSTRIAL
2.5mm x 4Core Armoured Cable (Nigerchin WIRE AND CABLE)
NIGERCHIN was incorporated in 1970 as the pioneer manufacturer of electric cables and conductors in Nigeria.
A partnership with Canada Wire and Cable International (CWI), then, a Canadian company with over 75 years experience in cable designed, engineering and manufacture, gave Nigerchin relevant technology, experience and facilities for product and manpower development.
Over time, Nigerchin has built on this foundation, competency for upgrading, producing and certifying quality products that meet international requirements in the electrical power industry and installations.
2.5mm 4 Core Armoured Cable is commonly found supplying mains voltage electricity to powered devices and networks. For example, it could be used to power outdoor buildings such as garden sheds or workshops as well as garden features such as jacuzzi/hot tubs.
The cable contains a steel wire armour, meaning it provides a mechanical protection for the insulating layers underneath. This also enables the cable to have higher pulling loads, making it perfectly suitable for dispensing from a cable drum on a building site, etc.
It’s construction is commonly identified by the plain annealed stranded copper for the cores, the PVC (Polyvinyl Chloride) for the bedding and sheathing, armour made from steel wire and XLPE (Cross-Linked Polyethylene) for the insulation.
The Steel Wire can also be used as a CPC (Circuit Protective Conductor), meaning the armour can be used an earth for the cable. This means that even though the cable has an earth core, it is still protected, meaning it abides by all health and safety regulations.
No. of cores / size of cable – 4
Approx overall diameter – 15.3mm
Approx weight (m) – 0.43Kg
Conductors – Plain Annealed Stranded Copper
Insulation – Cross-Linked Polyethylene (XLPE)
Bedding – PVC
Armour / Protection – Steel Wire
Sheath / Jacket – PVC
Colour – Black
Application – Primarily found within powered networks and providing mains electricity to powered devices.
Voltage Rating: – 600/1000VtSKU: 2.5mm nigerchin -
Electro, SOCKETS & SWITCHES, SWITCHES
BG Nexus Screwless Flatplate 20Amp Double Pole Switch with Neon Brushed Steel FBS31
Electro, SOCKETS & SWITCHES, SWITCHESBG Nexus Screwless Flatplate 20Amp Double Pole Switch with Neon Brushed Steel FBS31
The Screw less slim line design from Nexus comes in a range of finishes and will blend with any decor. Suitable for domestic and commercial installations. This switch plate is ideal when you require power not exceeding 13 Amps, can be used with pumps, heaters, boilers and many other fixed appliances.
Key Features
Fixed integrated plastic gasket to protect metal edges from moisture
Colour coded terminals with backed out captive screws for easy installation
Flat profile with rounded edges
Clip On & Off front plate design
Flush Neon Indicator
Flex outlet on front of plate
Under 5mm thickTechnical
Rating : 250V / 20 Amp
Switch type : Double pole
Terminal capacity : 3 x 2.5mm² / 2 x 4.0mm² / 1 x 6.0mm²
Minimum mounting box depth : 25mmGuarantee
30 Years, All British General products are guaranteed against faulty materials and workmanship for this period.Colour – Steel
Finish – Brushed Steel
Range – Nexus Flatplate
Size – W: 33mm x L: 90mm x H: 92mm
Unit Of Sale – Each
Weight – 0.18kg
Brand – BG Nexus
EDP code – FBS31
Screwed / Screwless – Screwless
Number of Gangs – 1 Gang
Pole Type – Double Pole
Amps – 20ASKU: FBS31 -
CABLE AND CABLE MANAGEMENT, Electro, SINGLE CORE WIRE
NigerChin 2.5mm Single Core Copper Wire – Red
We offer other range of products across various categories and sub categories and our services are Procurement, installation and Management etc of electrical products, should you have any inquiry we are always here to do our best to promptly answer you.
SKU: 354
There are no reviews yet.