Cometstar Conduit and Surface Wiring Cable are equipped with:
1. Copper Conductor
2. PVC Insulation
3. Earth Continuity Wire (Bare Copper)
4. PVC Outer Sheath
COMETSTAR FLAT CABLES WITH EARTH 2 X 4.0 mm
₦99,000.00
CompareBased on 0 reviews
Be the first to review “COMETSTAR FLAT CABLES WITH EARTH 2 X 4.0 mm”
-
ARMOURED CABLE, ELECTRICAL INDUSTRIAL
6mm x 4 Core S.W.A/P.V.C Armoured Cable (Nigerchin WIRE AND CABLE)
ARMOURED CABLE, ELECTRICAL INDUSTRIAL6mm x 4 Core S.W.A/P.V.C Armoured Cable (Nigerchin WIRE AND CABLE)
NIGERCHIN was incorporated in 1970 as the pioneer manufacturer of electric cables and conductors in Nigeria.
A partnership with Canada Wire and Cable International (CWI), then, a Canadian company with over 75 years experience in cable designed, engineering and manufacture, gave Nigerchin relevant technology, experience and facilities for product and manpower development.
Over time, Nigerchin has built on this foundation, competency for upgrading, producing and certifying quality products that meet international requirements in the electrical power industry and installations.
4mm 4 Core Armoured Cable is a form of electrical cable that has the ability to supply mains electrical power to devices and networks. The cable also has more domestic uses such as being used to supply mains electricity to devices such as outdoor buildings, for example, garden sheds or out-houses, as well as being suitable for outdoor lighting circuits such as patio and decking lights.
The cable construction is identified by plain annealed stranded copper being used for the conductors/cores, PVC (Polyvinyl Chloride) being used for the bedding and sheathing, cross-linked polyethylene being used for the insulation and steel wire being used for the armour.
Due to the steel wire armour that is within the cable protecting the insulating layers beneath, it is also used to give the cable higher pulling loads, meaning it can take the strain of being dispensed from cable drums when delivered to a building/construction site etc. The steel wire armour can also be used as a CPC (Circuit Protective Conductor) or ‘natural earth’ meaning that the armour itself will earth the cable.
No. of cores / size of cable – 6
Approx overall diameter – 16.4mm
Approx weight (m) – 0.54Kg
Conductors – Plain Annealed Stranded Copper
Insulation – Cross-Linked Polyethylene (XLPE)
Bedding – PVC
Armour / Protection – Steel Wire
Sheath / Jacket – PVC
Colour – Black
Application – Primarily found within powered networks and providing mains electricity to powered devices.
Voltage Rating: 600/1000VtSKU: 6mm nigeerchin -
CIRCUIT BREAKERS, DISTRIBUTION BOARDS, Electro
ABB SACE Tmax XT1B 160 Breaker 25A
A complete range of moulded case circuit-breakers up to 3200 A.
All the circuit-breakers, both three-pole and four-pole, are available in the fixed version; sizes T4 and T5 in the plug-in version and T4, T5, T6, and T7 also in the withdrawable one.
* High breaking capacity in compact dimensions
High values of short circuit breaking capacity are guaranteed at different voltage levels, without compromising overall dimensions.* Flexibility of use
Thermomagnetic and electronic trip units are available for use in AC/DC or in AC only. It is possible to interchange trip units keeping the
same breaking part, so that installation can be upgraded with fewer costs.* Advanced protection
A complete range of electronic trip units is suitable for different level of protection, even enhancing selectivity values with Early Fault
Detection and Prevention algorithm.SKU: ABB XT1B -
ARMOURED CABLE, ELECTRICAL INDUSTRIAL
10mm x 4Core Armoured Cable (Nigerchin WIRE AND CABLE)
10mm 4 Core Armoured Cable is a large variant of electrical cable used to supply mains voltage electricity to various devices and powered networks. Weatherproof and dust-proof, this cable is suitable for underground installation as well as being attached to structures or buildings using Cable Cleats. It is commonly found in a range of installations including;
– The Railway and Transport industry
– Underneath roads powering buildings
– Industrial networks such as power plants and factories
– Within cable ducting in the roofs of warehouses
The Cable is constructed from the following materials; Plain Annealed Stranded Copper for the conductors/cores, cross-linked polyethylene (XLPE) for the insulation, Steel Wire for the Armour and PVC (Polyvinyl Chloride) for the bedding and sheathing.
No. of cores / size of cable – 4
Approx overall diameter – 21.1mm
Approx weight (m) – 0.98Kg
Conductors – Plain Annealed Stranded Copper
Insulation – Cross-Linked Polyethylene (XLPE)
Bedding – PVC
Armour / Protection – Steel Wire
Sheath / Jacket – PVC
Colour – Black
Application – Primarily found within powered networks and providing mains electricity to powered devices.
Voltage Rating: – 600/1000VtSKU: 10mmnigerchin -
CATRIDGE AND INKS
HP 646A Magenta Original LaserJet Toner Cartridge (CF033A)
Overview
Keep business productivity high—avoid wasted time and supplies with reliable Original HP cartridges. HP ColorSphere technology delivers consistent, professional color on marketing, financial, design and engineering documents.
Features
Keep printing costs low while maintaining productivity. HP Color LaserJet toner cartridges deliver consistent, uninterrupted printing. Because cartridges are designed for exceptional reliability, you avoid wasted supplies and expensive delays.Produce standout business documents and marketing materials, using Original HP toner cartridges with HP ColorSphere technology. Get consistent, print shop-quality results on a wide range of laser papers designed for professional office printing.
Install cartridges quickly and easily—plus, intelligence built into Original HP toner cartridges makes usage tracking and reordering simple. Enjoy easy recycling—cartridges returned via HP Planet Partners are recycled responsibly.1
Specifications
Color(s) of printing supplies
Magenta
Print technology
Laser
Page yield (color)
12,500 pagesSKU: HP646M -
ELECTRICAL FITTINGS, Electro, FLUORESCENT FITTINGS
Fluorescent Fitting Philip with lamps 2ft Single Philips
ELECTRICAL FITTINGS, Electro, FLUORESCENT FITTINGSFluorescent Fitting Philip with lamps 2ft Single Philips
1. Effective, high-quality batten for a single fluorescent lamp; suitable for both direct and indirect lighting applications
2. Integrated slim HF electronic ballast for compactness
3. Easy fixing to ceiling with baseplate on which all the electrical and mechanical components are mounted
4. Low Energy Consumptiom
5. Fluorescent Tube IncludedSKU: fitting4
There are no reviews yet.