Metallic Delta Cable trays are manufactured for the smooth and easy pulling of cable from one point to another to BS EN 61537:2002. We have designed the best cable trays, by taking care of cable loads and practical site problems. Wherever possible all fitting are made of state of art single piece construction. Slotting Patterns are in such a way that it enables the easy cutting and joining at any point without drilling at site. Design allows greater cable filling capacity and smooth turning at bends.
Delta Cable Tray 200 X 100 X 3mtrs Hot Dip Galvanized
₦0.00
CompareBased on 0 reviews
Be the first to review “Delta Cable Tray 200 X 100 X 3mtrs Hot Dip Galvanized”
-
ACCESSORIES, ELECTRICAL INDUSTRIAL
Manrose 9 inch Extractor Fan
* Suitable for a variety of domestic and commercial applications, the Manrose WF300 range has been designed for window or wall mounting.Â
* Incorporating the latest ventilation technology and stylish design, these high performance extractor fans have an extract rate of 1100m3/hr, 306 litres per second.
* These high performance extractor fans are easy to install and are attractively styled in high gloss ABS thermoplastics for durability, ease of cleaning and maintenance and cover a wide variety of domestic and commercial applications including kitchens, utility rooms, pubs, restaurants, offices, shops and factories.
* The units are all manufactured using high impact ABS thermoplastics for strength and durability, aesthetics and easy cleaning.
* Power is provided by a four pole single phase induction motor with pre-oiled bearings, totally enclosed for protection against dust and dirt, for a long, maintenance-free life.SKU: manrose9 -
Electro, GEAR SWITCHES, GEAR SWITCHES & CHANGEOVER
Stanley Switch Gears – Side Handle 63Amp
Stanley Products always provides new technology for all industrial requirements, with excellent value for their investments. You can depend upon for matchless quality on all Stanley Products. Our new range products in sheet metal Side Handle Operating Switchgear are made as per industrial requirements with powder coating. This certificate of “Stanley” original products, issued with the assurance as the same has been manufactured in accordance with requirement of IEC-60947-3 (2005-06). Quality system, standards and mechanism has been tested satisfactory to the specific test as follows: 1. Dielectric Test 2. Mechanical Operation Test 3. High Voltage Test 4. Insulation Resistance Test 5. Temperature Rise Test 6. Mini Volt Drop Test STANLEY 63A Gear Switch
SKU: StanleyGear2 -
ARMOURED CABLE, ELECTRICAL INDUSTRIAL
4mm x 4 Core S.W.A/P.V.C Armoured Cable (Nigerchin WIRE AND CABLE)
ARMOURED CABLE, ELECTRICAL INDUSTRIAL4mm x 4 Core S.W.A/P.V.C Armoured Cable (Nigerchin WIRE AND CABLE)
NIGERCHIN was incorporated in 1970 as the pioneer manufacturer of electric cables and conductors in Nigeria.
A partnership with Canada Wire and Cable International (CWI), then, a Canadian company with over 75 years experience in cable designed, engineering and manufacture, gave Nigerchin relevant technology, experience and facilities for product and manpower development.
Over time, Nigerchin has built on this foundation, competency for upgrading, producing and certifying quality products that meet international requirements in the electrical power industry and installations.
4mm 4 Core Armoured Cable is a form of electrical cable that has the ability to supply mains electrical power to devices and networks. The cable also has more domestic uses such as being used to supply mains electricity to devices such as outdoor buildings, for example, garden sheds or out-houses, as well as being suitable for outdoor lighting circuits such as patio and decking lights.
The cable construction is identified by plain annealed stranded copper being used for the conductors/cores, PVC (Polyvinyl Chloride) being used for the bedding and sheathing, cross-linked polyethylene being used for the insulation and steel wire being used for the armour.
Due to the steel wire armour that is within the cable protecting the insulating layers beneath, it is also used to give the cable higher pulling loads, meaning it can take the strain of being dispensed from cable drums when delivered to a building/construction site etc. The steel wire armour can also be used as a CPC (Circuit Protective Conductor) or ‘natural earth’ meaning that the armour itself will earth the cable.
No. of cores / size of cable – 4
Approx overall diameter – 16.4mm
Approx weight (m) – 0.54Kg
Conductors – Plain Annealed Stranded Copper
Insulation – Cross-Linked Polyethylene (XLPE)
Bedding – PVC
Armour / Protection – Steel Wire
Sheath / Jacket – PVC
Colour – Black
Application – Primarily found within powered networks and providing mains electricity to powered devices.
Voltage Rating: 600/1000VtSKU: 4mm Nigerchin -
ARMOURED CABLE, ELECTRICAL INDUSTRIAL
150mm x 4 Core S.W.A/P.V.C Armoured Cable (Nigerchin Cable and Wire)
ARMOURED CABLE, ELECTRICAL INDUSTRIAL150mm x 4 Core S.W.A/P.V.C Armoured Cable (Nigerchin Cable and Wire)
150mm 4 Core Armoured Cable is a variant of steel wire armoured cable used for industrial electrical applications as well as being suitable for direct burial to carry mains electricity to various powered devices. It is also commonly found within powered networks such as within power stations and factories, etc.
This cable is commonly identified by the following construction; plain annealed stranded copper for the cores/conductors, polyvinyl chloride for the bedding and sheathing, cross-linked polyethylene for the insulation, with a steel wire armour protecting the layers beneath.
Although this cable is suitable for powering smaller, more domestic installations such as powering an outdoor shed or house as well as garden/water features, it is most commonly found within more industrial practices, as mentioned previously.SKU: 150mmnigerchin -
CHANGEOVER SWITCHES, Electro, GEAR SWITCHES & CHANGEOVER
100Amp Knife Switch
Type A, single-throw and double-throw, non-fusible knife switches have a corrosion resistant finish, are mounted on GPO-3 bases and have high clips and hinges. The high clips and hinges simplify the front-of-board connections. Available 30 Amp thru 2000 Amp.
Fusible Type A knife switches are arranged with fuse holders which will accept standard code fuses. When mounted on a panel the single-throw switch is fusible at the bottom. Available 30 Amp through 600 Amp at 250, 480 or 600 volt.SKU: 781
There are no reviews yet.