Coleman Wires and Cables is committed to manufacturing consistent quality wires and cables that meet and exceed our customers’ expectations. We ensure continual improvement of our processes and services delivery through staff development, motivation and creation of a conducive work environment towards achieving utmost customer satisfaction. Quality Policy Statement COLEMAN Technical industries limited in line with its context and strategic direction is commited to manufacturing quality electrical & telecommunications wires and cables that meet and exceed our customers’ expectation consistent with relevant stakeholders and ISO 9001:2015 requirements.
Flat Cable 2.5mm x 3core – Coleman
Coleman Conduit and Surface Wiring Cable are equipped with: 1. Copper Conductor 2. PVC Insulation 3. Earth Continuity Wire (Bare Copper) 4. PVC Outer Sheath
₦68,000.00
CompareBased on 0 reviews
Be the first to review “Flat Cable 2.5mm x 3core – Coleman”
-
HIGH BAY LIGHTS
HiClean LED High Bay Light HB04-150W
i. Beam angle: 90 & 120 degrees
ii. Intelligent light system for your industrial, Sports or Assembly areas
iii. Green, energy savings, long and reliable life of 100,000 hours
iv. No RF interference, No IR/UV radiation, no mercury pollution
v. Wide color availability in degrees Kelvin(K), 3000, 4000, 5000K
vi. Superior Uniformity; Superior Temperature Stability
vii. Temperature tested for the toughest conditions
viii. Environmental friendly, energy savings (to 90%),
ix. Special circuit design, each LED work separately, avoiding the single broken
x. LED influence problem
xi. Control options – Occupancy/DALI, 1-10V Dimming, Wireless,
and Daylight Sensor
xii. DLC Listed, UL, SAA, CE, ENEC, GS, SASO, DMark, EMC, ROHS Approved
xiii. This high bay is suitable for fresh and frozen meat processing plants,
fruit and vegetable processing and canning facilities.
xiv. Equal to 400-600W HID
xv. Luminous Flux – 19,500lmSKU: Luceo Highbay -
Electro, SOCKETS, SOCKETS & SWITCHES
Eaton-MEM 13 Amp Single Switched Socket
Eaton’s Moulded Accessory Range is manufactured in a robust, high quality thermoplastic. The range offers a comprehensive selection of solutions that combine reliability and durability with quick and simple installation. Designed with colour matching and aesthetics in mind, the range boasts an appealing front plate design. This enables easy side-by-side mounting of switches and sockets. Screw caps are provided to conceal fixing screws to give a clean finish.
Material: PVC Color: white. Number of gangs:1 Socket: 3 pin plug Amps: 13A. Power Voltage Supply:240V
SKU: 1501 -
SOLAR POWERED
Solar – SZYL-SCL-N803
1. Solar panel: 5W/6V.
2. Lithium battery: 3.7 V/4000 mAh (bottom), 7V/2000mAh (top).
3. Lighting time (top): About 18 hours at low mode, about 10 hours at high mode; Lighting time (bottom): About 30 hours at low mode, About 16 hours at high mode.
4. USB output: 5V/0.5A, 5V/1.5A.
5. Charging time: 5 hours by 5W solar panel.
6. Multi-function: Mosquito Repellent, FM-Radio, MP3-Play, Manual generator device, Mobile charger.SKU: 1532 -
LED DRIVERS
Philips Xitanium 50W 230V LED DRIVER Philip
Eco passport – Our environmental product specifications overview
Philips cares about the environment and society at large, and strongly supports eco-design of products.Specifications
General Characteristics:
Housing – [Not Specified]
Lifetime – 50000 hr
Input Frequency – 50/60 Hz
Relative Humidity – 10 (min), 90 (max) %
IP Classification – 20
Lifetime 90% surv.@Tcaselife – 50000 hr
System Description – TD/TE [Touch&DALI/Trailing edge dimming]
Number of LEDs – xOperating Characteristics
12V output – Yes
Ripple current – 20 %
Efficiency Range – 88-90 %
Power Factor Range – 0.9
Output Power Range – 15-50 W
Power Factor (100% load) – 0.9 (min) –
Output Voltage Range – 31-62 V
Output Current Range (mA) – 300-1000
Dimming range – 100-10 %
Dimmable – Yes
Input Voltage Range (DC) – 186-250 V
Inrush Current Peak – 48 (max) A
Output Current Tolerance – -5 (min), 5 (max) %
Inrush Current Width to 50% – 180 us
Type of Dimming – Touch&DALI and trailing edge
Input Voltage Range (AC) – 220-240 V
Earth leakage current – 0.7 (max) mA
Max drivers on MCB(16A type-B) – 12 (max) x
Control input protection – Yes (Basic insulation)Wiring Characteristics
Connection on driver to L2 – JST connector
Hot wiring – Yes
Connector type input terminal – Wago 250
Connector type output terminal – Wago 250Product Dimensions
Length A1 – 140.0 mm
Width B1 – 75 mm
Height C1 – 32 mm
Fixing Hole Diameter D1 – 4.5 mm
Fixing Hole Distance Width B2 – 63.7 mm
Fixing Hole Distance Length A2 – 128.5 mmSKU: Philip Driver1
There are no reviews yet.