This classic circular domed ceiling light is so simple it can be used in any room of the house, including the bathroom. The frosted white glass circle gives off a soft, even light and sits flush to the ceiling encased in a high-shine chrome-effect metal ring that, with its three protruding bolts, has the look of a porthole. If fitted in a bathroom, care should be taken with placement – full instructions regarding zones and safety are provided as part of the light’s instructions. The light is 8cm in height and 30cm wide and requires mains supply, wiring and some assembly, for which full instructions are provided.
Flush Fitting Ceiling Light Chrome Effect
This flush-fitted domed chrome frosted ceiling light takes either a GLS ES 42W halogen bulb, or a 12W energy saver, which are not included. Flush fitting ceiling light fitting. Wiring required. Maximum 1x 42W E27 GLS Halogen ES bulb or 12W energy saving bulb required. Bulb not included. Suitable for use in bathrooms excluding zone 0,1,2. For indoor use only. Always read instructions.
₦9,000.00
CompareBased on 0 reviews
Be the first to review “Flush Fitting Ceiling Light Chrome Effect”
-
ELECTRICAL INDUSTRIAL, Electro, LADDERS
Aluminium 36 Feet Ladder
ladder comes in a vertical or inclined set of rungs or steps. There are two types: rigid ladders that can be leaned against a vertical surface such as a wall, and rope ladders that are hung from the top. The vertical members of a rigid ladder are called stringers or rails (US) or stiles (UK). Rigid ladders are usually portable, but some types are permanently fixed to buildings. They are commonly made of metal, wood, or Fiberglass, but they have been known to be made of tough plastic.
SKU: 303 -
ELECTRICAL INDUSTRIAL, Electro, WIRE CABLE TRAY & CABLE LADDER
400mm x 50mm Foreign Wire Merge Cable Tray By 3Meter
ELECTRICAL INDUSTRIAL, Electro, WIRE CABLE TRAY & CABLE LADDER400mm x 50mm Foreign Wire Merge Cable Tray By 3Meter
Cable tray are the most common solution for supporting and routing of cables in an installation.
For this reason, cable tray are available in a variety of sizes and standards, in order to cover the
wide range of applications.Embedded perforations for :
– extra load capacity
– better aeration
– better stability
– better condensation drainage
-50x300mmAlternative perforations for :
– better fixation on the supports
– very useful for cable fixation
-Standard finish GalvanizedSKU: 400 x 50 -
CABLE AND CABLE MANAGEMENT, Electro, SINGLE CORE WIRE
Coleman cable 2.5 mm Wire & Cable – Red
PVC insulated flame retardant cables are fixed laid in the circuit with frequency 50Hz and voltage up to 0.6/1KV running from the main breaker panel or fuse box outlets to provide reliable, high-quality electrical current for your residential installations with our range of 100% pure copper wire from top brands like Coleman,you are sure of authentic products.
SKU: 1398 -
LED DRIVERS
Philips Xitanium 50W 230V LED DRIVER Philip
Eco passport – Our environmental product specifications overview
Philips cares about the environment and society at large, and strongly supports eco-design of products.Specifications
General Characteristics:
Housing – [Not Specified]
Lifetime – 50000 hr
Input Frequency – 50/60 Hz
Relative Humidity – 10 (min), 90 (max) %
IP Classification – 20
Lifetime 90% surv.@Tcaselife – 50000 hr
System Description – TD/TE [Touch&DALI/Trailing edge dimming]
Number of LEDs – xOperating Characteristics
12V output – Yes
Ripple current – 20 %
Efficiency Range – 88-90 %
Power Factor Range – 0.9
Output Power Range – 15-50 W
Power Factor (100% load) – 0.9 (min) –
Output Voltage Range – 31-62 V
Output Current Range (mA) – 300-1000
Dimming range – 100-10 %
Dimmable – Yes
Input Voltage Range (DC) – 186-250 V
Inrush Current Peak – 48 (max) A
Output Current Tolerance – -5 (min), 5 (max) %
Inrush Current Width to 50% – 180 us
Type of Dimming – Touch&DALI and trailing edge
Input Voltage Range (AC) – 220-240 V
Earth leakage current – 0.7 (max) mA
Max drivers on MCB(16A type-B) – 12 (max) x
Control input protection – Yes (Basic insulation)Wiring Characteristics
Connection on driver to L2 – JST connector
Hot wiring – Yes
Connector type input terminal – Wago 250
Connector type output terminal – Wago 250Product Dimensions
Length A1 – 140.0 mm
Width B1 – 75 mm
Height C1 – 32 mm
Fixing Hole Diameter D1 – 4.5 mm
Fixing Hole Distance Width B2 – 63.7 mm
Fixing Hole Distance Length A2 – 128.5 mmSKU: Philip Driver1
There are no reviews yet.