HP 312A Yellow Original LaserJet Toner Cartridge
(CF382A)
HP 312A Yellow Original LaserJet Toner Cartridge (CF382A)
Overview
Make documents and marketing materials look professional when you print with HP Original LaserJet Toner Cartridges. Keep your home or office productive by avoiding wasted time and supplies. These cartridges are specifically designed for your MFP.
Features
Expect quality – and get it time after time – from HP Original LaserJet Toner Cartridges. Avoid the reprints, wasted supplies and costly delays that can occur with non original cartridges.
Keep your business moving forward. Trust HP Original LaserJet Toner Cartridges for consistent, uninterrupted printing that helps keep you on task and on budget.
Don’t waste any time. Replace HP Original LaserJet Toner Cartridges in seconds and get back to printing. They’re specifically designed for your HP LaserJet MFP to make installation quick and easy.
Help conserve resources. Recycle your HP Original LaserJet Toner Cartridges – it’s easy and free with the HP Planet Partners program, available in more than 50 countries and territories worldwide.1
Specifications
Color(s) of printing supplies
Yellow
Print technology
Laser
Page yield (color)
2,700 pages
₦43,500.00
CompareBased on 0 reviews
Be the first to review “HP 312A Yellow Original LaserJet Toner Cartridge (CF382A)”
-
ARMOURED CABLE, ELECTRICAL INDUSTRIAL
150mm x 4 Core S.W.A/P.V.C Armoured Cable (Nigerchin Cable and Wire)
ARMOURED CABLE, ELECTRICAL INDUSTRIAL150mm x 4 Core S.W.A/P.V.C Armoured Cable (Nigerchin Cable and Wire)
150mm 4 Core Armoured Cable is a variant of steel wire armoured cable used for industrial electrical applications as well as being suitable for direct burial to carry mains electricity to various powered devices. It is also commonly found within powered networks such as within power stations and factories, etc.
This cable is commonly identified by the following construction; plain annealed stranded copper for the cores/conductors, polyvinyl chloride for the bedding and sheathing, cross-linked polyethylene for the insulation, with a steel wire armour protecting the layers beneath.
Although this cable is suitable for powering smaller, more domestic installations such as powering an outdoor shed or house as well as garden/water features, it is most commonly found within more industrial practices, as mentioned previously.SKU: 150mmnigerchin -
LED DRIVERS
Philips Xitanium 50W 230V LED DRIVER Philip
Eco passport – Our environmental product specifications overview
Philips cares about the environment and society at large, and strongly supports eco-design of products.Specifications
General Characteristics:
Housing – [Not Specified]
Lifetime – 50000 hr
Input Frequency – 50/60 Hz
Relative Humidity – 10 (min), 90 (max) %
IP Classification – 20
Lifetime 90% surv.@Tcaselife – 50000 hr
System Description – TD/TE [Touch&DALI/Trailing edge dimming]
Number of LEDs – xOperating Characteristics
12V output – Yes
Ripple current – 20 %
Efficiency Range – 88-90 %
Power Factor Range – 0.9
Output Power Range – 15-50 W
Power Factor (100% load) – 0.9 (min) –
Output Voltage Range – 31-62 V
Output Current Range (mA) – 300-1000
Dimming range – 100-10 %
Dimmable – Yes
Input Voltage Range (DC) – 186-250 V
Inrush Current Peak – 48 (max) A
Output Current Tolerance – -5 (min), 5 (max) %
Inrush Current Width to 50% – 180 us
Type of Dimming – Touch&DALI and trailing edge
Input Voltage Range (AC) – 220-240 V
Earth leakage current – 0.7 (max) mA
Max drivers on MCB(16A type-B) – 12 (max) x
Control input protection – Yes (Basic insulation)Wiring Characteristics
Connection on driver to L2 – JST connector
Hot wiring – Yes
Connector type input terminal – Wago 250
Connector type output terminal – Wago 250Product Dimensions
Length A1 – 140.0 mm
Width B1 – 75 mm
Height C1 – 32 mm
Fixing Hole Diameter D1 – 4.5 mm
Fixing Hole Distance Width B2 – 63.7 mm
Fixing Hole Distance Length A2 – 128.5 mmSKU: Philip Driver1 -
Electro, GEAR SWITCHES, GEAR SWITCHES & CHANGEOVER
ABB Gear Switch 400A TPN
With ABB’s change-over switches, people and equipment are safe
Easy and flexible installation
Depending on the size, the switch can be mounted in different positions, on the panel door or DIN rail. Snap-on accessories and connections are available.
• IP65 rated (not suitable for external installation) Steel Enclosure
• Powder coated textured finish (RAL 7035)
• All switches are supplied with fuses and removable gland plates
• All 3 pole switches include detachable neutral link (OT160 solid link)
• Hinged lid complete with lock
• Switch Fuses are internally rated IP20 on incoming terminals up to 63A
• Pad lockable pistol grip handle as standard • Switch Fuses 100A are supplied with incoming terminal shrouds not fitted to allow customer connectionsSKU: ABB315
There are no reviews yet.