The Clipsal C-Bus system is a microprocessor based wiring system to control lighting and other electrical services. From on/off control of a lighting circuit to analogue type control, Such as dimming electronic fluorescent ballasts, C-Bus can control and automate virtually any type of electrical load
Legrand CLIPSAL SWITCH 1 GANG – 30Amps
Key Features:
1 gang
Rockers are a long throw momentary action type
C-bus learn enabled
LED button indicators provide illumination and status feedback
Night light feature
Fall back level option to dim indicators at a set time after the last button press
Mounted using standard mounting accessories
₦6,600.00
CompareBased on 0 reviews
Be the first to review “Legrand CLIPSAL SWITCH 1 GANG – 30Amps”
-
CHANDELIER LIGHT, Electro, HOME&OFFICE LIGHTING, LIGHTING
3 Arm Light Fitting Marie Therese
-For your safety, this product must be installed in accordance with local Building Regulations. If in any doubt, or where required by law, consult a competent person who is registered with an electrical self- certification scheme. Further information is available online or from your local authority-
SKU: 239 -
SOLAR POWERED
Solar Rechargeable Light
1. Power source: AC100~240V or DC 9V;
2.Rechargeable battery: 6V/4.5AH maintenance-free Lead-acid
battery
3. Lighting source : with 36pcs super bright LED; 4. Charging time: 12 hours approx. by AC charging adaptor,
and 15 hours approx. in the strong sunlight by solar panel;
5. Duration time: about 48 hours approx after being fully
charged at low mode and 24 hours at high mode; 6. USB output: DC 5V/500MA, cell phone or MP3 charged
when the battery voltage over 6V; 7. Outer shell : ABS plastic; 8. Charging mode : a. AC rechargeable adaptor; b. Solar panel:
3W/9V or 3W/12V mono or poly crystalline silicon solar
panel;SKU: 1550 -
MOTOR STARTER
Three Phase Motor Starter 12-18A
General Description:
Motor starter are suitable for 50Hz or 60Hz, rated voltage up to 660V, current up to 95A circuit. In order to protect motor starting, accelerating the motor to rated rev, against overload operation and artificially breaking the circuit of protected motor.
Structure Feature:
1. Sealed: Plastic box LE1-D09~D32 and iron box platstic coated LE1-D40~D95, protection up to IP65;
2. Operation system with manual “START” and “STOP” buttons. With thermal overload relay consisting a inversable starter;
3. Install different accessories derive many kinds of other products;
4. Select LC1-D contactor with standard 35mm rail, which can be fixed directly at the base of starter. Wires extracted from the three phase of the thermal overload relay can be inserted the three phase main contacts of the contactor, easy assembly and connection.SKU: 1498 -
Electro, HALOGEN, LIGHT BULBS, LIGHTING
Metal halide lamps 1000watt – Osram
Product benefits
– Output of up to 2,000 W
– High efficiency
– E40 screw base for simple lamp handling
– Long lifetime
– UV values significantly below the maximum permitted thresholds to IEC 61167 thanks to UV filterAreas of application
– Factories and workshops
– Sports halls and multi-purpose halls
– Industrial installations
– Airports
– Docks and port facilities
– Marshaling yards, container transshipment facilities
– Approved only for use in enclosed luminaires
– Outdoor applications only in suitable luminairesSKU: MH1000w -
CABLE AND CABLE MANAGEMENT, Electro, SINGLE CORE WIRE
Cutix 2.5mm Single Core Copper Wire
Our cables with PVC (Polyvinyl Chloride) sheathing are used in a vast number of applications from fixed wiring to flexible installations and they are available in various sizes, colours and number of conductors.
SKU: Cutix2.5
There are no reviews yet.