Areas of application
– Factories and workshops
– Sports halls and multi-purpose halls
– Industrial installations
– Airports
– Docks and port facilities
– Marshaling yards, container transshipment facilities
– Approved only for use in enclosed lu
Metal halide lamps 1000watt – Osram
Product benefits
– Output of up to 2,000 W
– High efficiency
– E40 screw base for simple lamp handling
– Long lifetime
– UV values significantly below the maximum permitted thresholds to IEC 61167 thanks to UV filter
Areas of application
– Factories and workshops
– Sports halls and multi-purpose halls
– Industrial installations
– Airports
– Docks and port facilities
– Marshaling yards, container transshipment facilities
– Approved only for use in enclosed luminaires
– Outdoor applications only in suitable luminaires
₦50,000.00
CompareBased on 0 reviews
Be the first to review “Metal halide lamps 1000watt – Osram”
-
CIRCUIT BREAKERS, DISTRIBUTION BOARDS, Electro
ABB SACE Tmax XT1B 160 Breaker 32A
A complete range of moulded case circuit-breakers up to 3200 A.
All the circuit-breakers, both three-pole and four-pole, are available in the fixed version; sizes T4 and T5 in the plug-in version and T4, T5, T6, and T7 also in the withdrawable one.
* High breaking capacity in compact dimensions
High values of short circuit breaking capacity are guaranteed at different voltage levels, without compromising overall dimensions.* Flexibility of use
Thermomagnetic and electronic trip units are available for use in AC/DC or in AC only. It is possible to interchange trip units keeping the
same breaking part, so that installation can be upgraded with fewer costs.* Advanced protection
A complete range of electronic trip units is suitable for different level of protection, even enhancing selectivity values with Early Fault
Detection and Prevention algorithm.SKU: ABB TXB3 -
CIRCUIT BREAKERS
TeSys Schneider Electric Overload Relays 7 – 10amps
3-pole relays with screw clamp terminals
These overload relays are designed for the protection of motors. They are
compensated and phase failure sensitive. Resetting can either be manual or
automatic.
Direct mounting: under the contactor for versions with screw clamp terminals only;
pre-wired terminals, see pages B11/28 and B11/30.
Separate mounting: using terminal block LA7 K0064 (see below).
On the front face of the overload relay:
b selection of reset mode: Manual (marked H) or Automatic (marked A),
b red pushbutton: Trip Test function,
b blue pushbutton: Stop and manual Reset,
b yellow trip flag indicator: overload relay tripped.
Protection by magnetic circuit breaker GV2 LE, see pages A6/11 and A6/20.SKU: Overload4 -
CABLE AND CABLE MANAGEMENT, Electro, SINGLE CORE WIRE
Coleman cable 6mm Wire & Cable- Red
Coleman offers a wide range of products certified by Nigerian Industrial Standard (NIS) and the Standards Organisation of Nigeria (SON). (ISO 9001/2000 and ISO 14001 SON SGS CE standard and British standards to make sure our electrical are safe for use at home or offices etc and our brands of wires and cable can be used for power supply and general wiring in a vast range of low voltage (LV), medium voltage (MV) and high voltage (HV).
SKU: 1394 -
SOLAR POWERED
Solar Power Systems 280W/36V
*solar panel: 280W/36V *2
*battery: 12V/100AH *2
*controller: 48V/40A
*inverter: 48V/1500W sine wave
* Multiple AC output: 4* 220V AC.
*Electricity generated per day: Approximately 3.6KWH in
sunny weather. * Electricity consumed per day: Maximum power
consumption 5.6KWH.
*Total power consumption of loads should not exceed
2400W per hour
*AC Adapter :by option.SKU: 1557 -
GEAR SWITCHES
ABB Gear Switch 800A TPN
With ABB’s change-over switches, people and equipment are safe
Easy and flexible installation
Depending on the size, the switch can be mounted in different positions, on the panel door or DIN rail. Snap-on accessories and connections are available.
• IP65 rated (not suitable for external installation) Steel Enclosure
• Powder coated textured finish (RAL 7035)
• All switches are supplied with fuses and removable gland plates
• All 3 pole switches include detachable neutral link (OT160 solid link)
• Hinged lid complete with lock
• Switch Fuses are internally rated IP20 on incoming terminals up to 63A
• Pad lockable pistol grip handle as standard • Switch Fuses 100A are supplied with incoming terminal shrouds not fitted to allow customer connectionsSKU: ABB800
There are no reviews yet.