3x 33m rolls of Wilko PVC Insulating Tape. Flame retardant, cold weather resistant.
PVC Insulating Tape
Always read instructions.
₦1,800.00
CompareBased on 0 reviews
Be the first to review “PVC Insulating Tape”
-
LED DRIVERS
Philips Xitanium 50W 230V LED DRIVER Philip
Eco passport – Our environmental product specifications overview
Philips cares about the environment and society at large, and strongly supports eco-design of products.Specifications
General Characteristics:
Housing – [Not Specified]
Lifetime – 50000 hr
Input Frequency – 50/60 Hz
Relative Humidity – 10 (min), 90 (max) %
IP Classification – 20
Lifetime 90% surv.@Tcaselife – 50000 hr
System Description – TD/TE [Touch&DALI/Trailing edge dimming]
Number of LEDs – xOperating Characteristics
12V output – Yes
Ripple current – 20 %
Efficiency Range – 88-90 %
Power Factor Range – 0.9
Output Power Range – 15-50 W
Power Factor (100% load) – 0.9 (min) –
Output Voltage Range – 31-62 V
Output Current Range (mA) – 300-1000
Dimming range – 100-10 %
Dimmable – Yes
Input Voltage Range (DC) – 186-250 V
Inrush Current Peak – 48 (max) A
Output Current Tolerance – -5 (min), 5 (max) %
Inrush Current Width to 50% – 180 us
Type of Dimming – Touch&DALI and trailing edge
Input Voltage Range (AC) – 220-240 V
Earth leakage current – 0.7 (max) mA
Max drivers on MCB(16A type-B) – 12 (max) x
Control input protection – Yes (Basic insulation)Wiring Characteristics
Connection on driver to L2 – JST connector
Hot wiring – Yes
Connector type input terminal – Wago 250
Connector type output terminal – Wago 250Product Dimensions
Length A1 – 140.0 mm
Width B1 – 75 mm
Height C1 – 32 mm
Fixing Hole Diameter D1 – 4.5 mm
Fixing Hole Distance Width B2 – 63.7 mm
Fixing Hole Distance Length A2 – 128.5 mmSKU: Philip Driver1 -
ELECTRICAL FITTINGS, Electro, TRUNCKING
50x75mm Dignity PVC Trunking
The advantages of PVC Wire Duct:
1. Low cost, significant cost savings compared to standard traditional tray products.
2. Light in weight, wide range of sizes.
3. Fast heat dispersion.
4. Strong enough to withstand short circuits. Provides strength, rigidity without additional hardware.
5. Adapts to difficult architectural designs to accommodate changes in direction and elevation of cable runs.
6.Flexible, easy and fast installation. Design allows cable exit or entry at any point.
7. Cables can be secured to clamps or ties.
8.Various hardware accessories available to fix, support and install.
9. Safe smooth edge design to protect cable.
10.Easy for line check and cleaning , easy maintained.SKU: 412 -
DISTRIBUTION BOARDS, DISTRIBUTION BOARDS, Electro
Schneider Electric 3 Phase 12 Ways Distribution Board
DISTRIBUTION BOARDS, DISTRIBUTION BOARDS, ElectroSchneider Electric 3 Phase 12 Ways Distribution Board
Disbo-Extra Isobar is a complete range of single and 3 phase distribution boards for commercial and industrial applications.
Standard distribution boards up to 24 ways
Meter ready distribution boards up to 24 ways
Split metered distribution boards up to 22 ways
Any outgoing way can be converted to switch the Neutral
Fully type tested conditional short circuit rating of 25kA to BS EN 61439-3
High performance MCB 10kA BS EN 60898 15kA BS EN 60947-2 in B, C or D curve 1, 2, 3, 4 pole
250A Busbar rating
Isobar disconnection to BS EN 60947-3 ensuring unused outgoing ways are isolated
Option of switching outgoing neutral on all boards using distributed neutral kit
Terminal block for feeding up to 100A
Range of incomers: switch disconnectors, residual current devices, terminal blocks, MCCB
Single pole RCBO for new or retrofit maintaining device density
Full range of device accessories and auxiliaries
Knockouts for cable gland and conduit mixed to suit the installation needs without loss of space
Removable insulated pan assembly
Fully shrouded neutral
Split neutral bars
Removable gland plates
Optional metering, dual supply, surge protection and contactor on incoming Metered extension enclosures.SKU: Schneider9
There are no reviews yet.