Zone 2, 3. Class: Class II – Double Insulated. Driver Required: No. Dimmable: Yes. Switched: No. Dimensions: H: 350; W: 80; D: 100mm. Installation Orientation:.
Based on 0 reviews
Be the first to review “RIVA 350”
-
GEAR SWITCHES
Stanley Switch Gears – Side Handle 32Amp
Stanley Products always provides new technology for all industrial requirements, with excellent value for their investments. You can depend upon for matchless quality on all Stanley Products. Our new range products in sheet metal Side Handle Operating Switchgear are made as per industrial requirements with powder coating. This certificate of “Stanley” original products, issued with the assurance as the same has been manufactured in accordance with requirement of IEC-60947-3 (2005-06). Quality system, standards and mechanism has been tested satisfactory to the specific test as follows: 1. Dielectric Test 2. Mechanical Operation Test 3. High Voltage Test 4. Insulation Resistance Test 5. Temperature Rise Test 6. Mini Volt Drop Test STANLEY 32A Gear Switch
SKU: StanleyGear3 -
DISTRIBUTION BOARDS, DISTRIBUTION BOARDS, Electro
Eaton-MEM 6way Three Phase(TPN) Distribution Board C/W MCB
DISTRIBUTION BOARDS, DISTRIBUTION BOARDS, ElectroEaton-MEM 6way Three Phase(TPN) Distribution Board C/W MCB
Features Compact DBs which occupy minimum space Raised neutral link for easy wiring Suitable for surface & fush mounting Detachable din bar with end stoppers for easy assembly of breakers Supplied with fully shielded bus-bars Level marks for providing indication for fitment in wall Supplied with neutral & earth link, top & bottom detachable plates Supplied with masking sheet to protect components from cement during plastering
SKU: 263 -
ELECTRICAL INDUSTRIAL, Electro, TRANSFORMER
ABB 200KVA 11/400KV Distribution Transformer
Distribution transformers are typically oil-immersed and suitable for pole-, pad- or ground-mounting. They represent an economical option for certain networks, particularly those with low population densities.
Depending upon requirements, transformers may be connected between two phases of a three-phase system (two high voltage bushings) or from one phase to ground (single high voltage bushing).
The units are suitable for residential overhead distribution loads, as well as light commercial or industrial loads and diversified power applications.
Product scope
- Primary voltage: up to 36 kV
- Typical fluid: mineral oil
SKU: transfor200kva -
ARMOURED CABLE, ELECTRICAL INDUSTRIAL
2.5mm x 4Core Armoured Cable (Kablemetal)
2.5mm 4 Core Armoured Cable is commonly found supplying mains voltage electricity to powered devices and networks. For example, it could be used to power outdoor buildings such as garden sheds or workshops as well as garden features such as jacuzzi/hot tubs.
The cable contains a steel wire armour, meaning it provides a mechanical protection for the insulating layers underneath. This also enables the cable to have higher pulling loads, making it perfectly suitable for dispensing from a cable drum on a building site, etc.
It’s construction is commonly identified by the plain annealed stranded copper for the cores, the PVC (Polyvinyl Chloride) for the bedding and sheathing, armour made from steel wire and XLPE (Cross-Linked Polyethylene) for the insulation.
The Steel Wire can also be used as a CPC (Circuit Protective Conductor), meaning the armour can be used an earth for the cable. This means that even though the cable has an earth core, it is still protected, meaning it abides by all health and safety regulations.
No. of cores / size of cable – 4
Approx overall diameter – 15.3mm
Approx weight (m) – 0.43Kg
Conductors – Plain Annealed Stranded Copper
Insulation – Cross-Linked Polyethylene (XLPE)
Bedding – PVC
Armour / Protection – Steel Wire
Sheath / Jacket – PVC
Colour – Black
Application – Primarily found within powered networks and providing mains electricity to powered devices.
Voltage Rating: – 600/1000VtSKU: 8515
There are no reviews yet.