Different Technologies are coming up to reduced environmental hazards arising from power generation effluents/wastes that have greenhouse effects. An example of such technologies is the solar technology. To this end, we have introduced Electronics powered by solar that is the most advanced and sophisticated in the industry to date.
Solar Fan With Radio
Out of stock
1.Rechargeable LED light:32pcs high brightness LED lamp as table lamp which can be lighting above 8 hours at high mode and 22 hours at low mode;
2.FM Radio: The machine equipped with a stereo FM radio,allow you to enjoy the airwaves to bring the fun anytime,aywhere;
3.Air Fan: a.Provide wind in hot weather.b Speed:6000rpm c.Power:2.3W,Input Current:70mA;
4.Battery:3.7V 4000mAH lithium battery;
5.Charging time:a.About 10 hours by solar panel b.About 12 hours by AC adaptor;
6.Recharge every three months if the light is not used for a long time.
₦6,500.00
Out of stock
CompareBased on 0 reviews
Be the first to review “Solar Fan With Radio”
-
ARMOURED CABLE, ELECTRICAL INDUSTRIAL
50mm x 4Core Armoured Cable (Kablemetal Nexans Nigeria)
50mm 4 Core Armoured Cable is a large and specific size of Armoured Cable, primarily found within large powered networks whilst also carrying power to a range of different powered devices. Although this cable can be used for domestic uses such as powering outdoor sheds and greenhouses as well as water features and outdoor lights, due to its size, it is commonly found within more industrial installations such as power stations and large construction sites.
The cable is constructed itself from the following; Plain Annealed Stranded Copper for the cores/conductors, XLPE (Cross-Linked Polyethylene) for the insulation, PVC (Polyvinyl Chloride) for the bedding and sheathing & steel wire for the armour protecting the layers beneath.
The steel wire armour within the cable also provides a mechanical protection, therefore it enables the cable higher pulling loads, which is useful for when the cable is being dispensed from a large drum.
No. of cores / size of cable – 4
Approx overall diameter – 31.3mm
Approx weight (m) – 2.95Kg
Conductors – Plain Annealed Stranded Copper
Insulation – Cross-Linked Polyethylene
Bedding – Polyvinyl Chloride
Armour / Protection – Steel wire
Sheath / Jacket – Polyvinyl Chloride
Colour – Black
Application – Used primarily within large powered networks supplying mains electricity to multiple devices.
Voltage Rating: 600/1000VtSKU: 1520 -
CIRCUIT BREAKERS
TeSys Schneider Electric Overload Relays 2.3-4amps
3-pole relays with screw clamp terminals
These overload relays are designed for the protection of motors. They are
compensated and phase failure sensitive. Resetting can either be manual or
automatic.
Direct mounting: under the contactor for versions with screw clamp terminals only;
pre-wired terminals, see pages B11/28 and B11/30.
Separate mounting: using terminal block LA7 K0064 (see below).
On the front face of the overload relay:
b selection of reset mode: Manual (marked H) or Automatic (marked A),
b red pushbutton: Trip Test function,
b blue pushbutton: Stop and manual Reset,
b yellow trip flag indicator: overload relay tripped.
Protection by magnetic circuit breaker GV2 LE, see pages A6/11 and A6/20.SKU: Overload2 -
WIRE CABLE TRAY & CABLE LADDER
Threaded Rod by 2.2mtrs
Threaded rod have a thread cut entirely along them. Cut sections of them can be used in the fabrication/installation of trapezes, or to hang other components. The rod itself can be supported with products such as drop-in anchors or other hangers.
SKU: Threaded
There are no reviews yet.