Operating System: Windows 8 Single Language 64 bit (English Version)
Graphics Accelerator: Intel® HD Graphics 4000
Hard Disk Drive: 500 GB*4 (Serial ATA, 5400 rpm)
Processor Name: Intel® Core™ i3-3227U Processor 1.90 GHz*1
Chipset: Intel® HM76 Express Chipset
Cache Memory: 3 MB (L3 Cache)
Sound Chip: Intel® High Definition Audio
Wireless LAN Type: IEEE 802.11b/g/n*7
Wireless LAN Data Rate: Maximum transmission speed: 150 Mbps*8, Maximum receipt speed: 150 Mbps*8
Bluetooth: Bluetooth® standard Ver. 4.0 + HS
Dimensions (WxHxD): 342 x 24.9 x 242.5 mm
Weight: 2.2 kg (including the supplied battery)
Speaker: Internal Stereo speakers
Microphone: Internal Monaural microphone
Audio Technology: ClearAudio+ mode (Music, Video), S-FORCE Front Surround 3D, Clear Phase, xLOUD, VPT
Based on 0 reviews
Be the first to review “SONY SVF-1421 3SG-B”
-
ELECTRICAL INDUSTRIAL, TRANSFORMER
ABB Transformer 1500KVA 33/400KV
Distribution transformers are typically oil-immersed and suitable for pole-, pad- or ground-mounting. They represent an economical option for certain networks, particularly those with low population densities.
Depending upon requirements, transformers may be connected between two phases of a three-phase system (two high voltage bushings) or from one phase to ground (single high voltage bushing).
The units are suitable for residential overhead distribution loads, as well as light commercial or industrial loads and diversified power applications.
Product scope
- Primary voltage: up to 36 kV
- Typical fluid: mineral oil
SKU: DTS150033 -
HIGH BAY LIGHTS
Luceco LED Highbay Light LHBR 200W (31200lm)
Product Features
IP65 highbay with industry-leading efficacy
Multiple mounting options
Integrated heat sink
IP65 PIR sensor compatible
IP65 Integrated emergency
Stainless steel hardware
0-10V Dimmable
Supplied with 2′ of SJTW cable
1′ safety chain includedColor Temperature: 4000K, 5000K
Efficacy: Up to 160lm/W
Lumen Maintenance: L70 calculated at 100,000hrs
IP Rating: IP65
Beam Angle: 60°, 90°, 120°SKU: Luceco200w -
-
CIRCUIT BREAKERS
TeSys Schneider Electric Overload Relays 2.3-4amps
3-pole relays with screw clamp terminals
These overload relays are designed for the protection of motors. They are
compensated and phase failure sensitive. Resetting can either be manual or
automatic.
Direct mounting: under the contactor for versions with screw clamp terminals only;
pre-wired terminals, see pages B11/28 and B11/30.
Separate mounting: using terminal block LA7 K0064 (see below).
On the front face of the overload relay:
b selection of reset mode: Manual (marked H) or Automatic (marked A),
b red pushbutton: Trip Test function,
b blue pushbutton: Stop and manual Reset,
b yellow trip flag indicator: overload relay tripped.
Protection by magnetic circuit breaker GV2 LE, see pages A6/11 and A6/20.SKU: Overload2
There are no reviews yet.