A 12 way terminal block connector suitable for up to 30amp.
Terminal Block 12 Way 5a
A 12 way terminal block connector suitable for up to 5amp.
₦850.00
CompareBased on 0 reviews
Be the first to review “Terminal Block 12 Way 5a”
-
LED DRIVERS
Philips Xitanium 50W 230V LED DRIVER Philip
Eco passport – Our environmental product specifications overview
Philips cares about the environment and society at large, and strongly supports eco-design of products.Specifications
General Characteristics:
Housing – [Not Specified]
Lifetime – 50000 hr
Input Frequency – 50/60 Hz
Relative Humidity – 10 (min), 90 (max) %
IP Classification – 20
Lifetime 90% surv.@Tcaselife – 50000 hr
System Description – TD/TE [Touch&DALI/Trailing edge dimming]
Number of LEDs – xOperating Characteristics
12V output – Yes
Ripple current – 20 %
Efficiency Range – 88-90 %
Power Factor Range – 0.9
Output Power Range – 15-50 W
Power Factor (100% load) – 0.9 (min) –
Output Voltage Range – 31-62 V
Output Current Range (mA) – 300-1000
Dimming range – 100-10 %
Dimmable – Yes
Input Voltage Range (DC) – 186-250 V
Inrush Current Peak – 48 (max) A
Output Current Tolerance – -5 (min), 5 (max) %
Inrush Current Width to 50% – 180 us
Type of Dimming – Touch&DALI and trailing edge
Input Voltage Range (AC) – 220-240 V
Earth leakage current – 0.7 (max) mA
Max drivers on MCB(16A type-B) – 12 (max) x
Control input protection – Yes (Basic insulation)Wiring Characteristics
Connection on driver to L2 – JST connector
Hot wiring – Yes
Connector type input terminal – Wago 250
Connector type output terminal – Wago 250Product Dimensions
Length A1 – 140.0 mm
Width B1 – 75 mm
Height C1 – 32 mm
Fixing Hole Diameter D1 – 4.5 mm
Fixing Hole Distance Width B2 – 63.7 mm
Fixing Hole Distance Length A2 – 128.5 mmSKU: Philip Driver1 -
CHANDELIER LIGHT, Electro, HOME&OFFICE LIGHTING, LIGHTING
Chandelier Smoke With Teal 5 Arm
-For your safety, this product must be installed in accordance with local Building Regulations. If in any doubt, or where required by law, consult a competent person who is registered with an electrical self-certification scheme. Further information is available online or from your local authority-
SKU: 204 -
ARMOURED CABLE, ELECTRICAL INDUSTRIAL
240mm x 4 Core Armoured Cable (Kabelmetel Nexans Nigeria)/Per meter
ARMOURED CABLE, ELECTRICAL INDUSTRIAL240mm x 4 Core Armoured Cable (Kabelmetel Nexans Nigeria)/Per meter
240mm 4 Core Armoured Cable is a variant of steel wire armoured cable used for industrial electrical applications as well as being suitable for direct burial to carry mains electricity to various powered devices. It is also commonly found within powered networks such as within power stations and factories, etc.
This cable is commonly identified by the following construction; plain annealed stranded copper for the cores/conductors, polyvinyl chloride for the bedding and sheathing, cross-linked polyethylene for the insulation, with a steel wire armour protecting the layers beneath.
Although this cable is suitable for powering smaller, more domestic installations such as powering an outdoor shed or house as well as garden/water features, it is most commonly found within more industrial practices, as mentioned previously.
240mm 4 Core Armoured Cable is constructed from the following materials;– Plain Annealed Stranded Copper for the cores
– Cross-Linked Polyethylene for the Insulation
– PVC (Polyvinyl Chloride) for the bedding and sheathing
– Steel Wire for the armour protecting the insulating layers beneath.
– Voltage Rating: 600/1000Vt
SKU: AC240 -
ACCESSORIES, ELECTRICAL FITTINGS, Electro
20mm (3mtrs) Dignity Conduit Pipes Per Bundle
1) Non-conductive: good insulation, assuring a safe system. 2) Smooth surface: small friction coefficient to ensure the cables go through smoothly. 3) Fire resistance: self-extinguishing, do not support combustion. 4) Corrosion Resistance: resistant to acids, bases and salts, assuring a lower maintenance cost and a longer performance life. 5) Impact strength: resistant to compression and impact, suitable to be buried in concrete. 6) Easy Installation: light weight, easy to cut, transport, bent and handle; connecting by solvent cement and threading joining.
SKU: 1407
There are no reviews yet.