Metallic Delta Cable ladders are manufactured for the smooth and easy pulling of cable from one point to another. We have designed the best cable ladders, by taking care of cable loads and practical site problems. The rungs are heavy duty strut channels which provides a heavy support to the cables even in wider ladders. Delta Cable ladders is having maximum cable loading depth by fixing rungs at the lowest point of side rails. Spacings of rungs are done in such a way that it enables the dropping of any large diameter cables.
TransDelta 200 x 150 x 3mtrs Cable Ladders
₦0.00
CompareBased on 0 reviews
Be the first to review “TransDelta 200 x 150 x 3mtrs Cable Ladders”
-
WIRE CABLE TRAY & CABLE LADDER
150mm X 50mm Nigeria made Galvanized Cable Tray By 2.5 Meter
Embedded perforations for : – extra load capacity – better aeration – better stability – better condensation drainage Alternative perforations for : – better fixation on the supports – very useful for cable fixation -Standard finish Galvanized
SKU: N150x50 -
ACCESSORIES
APC 700 VA UPS
APC Back-UPS 700VA, 230V, AVR, IEC Sockets
Battery Backup & Surge Protector for Electronics and Computers
Includes : User Manual1. Automatic Voltage Regulation (AVR): Automatically steps up low voltage and steps down high voltage to levels that are suitable for your equipment.
2. Telephone dataline surge protection: Provides protection of connected equipment from power surges traveling on telephone lines.
3. USB connection: Use your PC to access additional power protection and management features for your UPS via a USB Port.
4. LED status display: Quickly understand unit and power status with visual indicators.
5. Audible alarms: Provides notification of changing utility power and UPS power conditions
6. Battery-protected and surge-only outlets: Reserves power capacity and run time for connected equipment that require UPS battery back-up while providing surge only protection for less critical equipment
7. Safety-agency approved: Ensures the product has been tested and approved to work safely with the connected service provider equipment and within the specified environment.
8. Battery and surge protected outlets: Back up and protect your hardware and data during power outages, surges and spikes.
9. Surge only outlets: Protect secondary electronics from surges and spikes without reducing battery power used to run primary electronics during an outage.SKU: APC700 -
SOLAR POWERED
Solar Power Systems 280W/36V
*solar panel: 280W/36V *2
*battery: 12V/100AH *2
*controller: 48V/40A
*inverter: 48V/1500W sine wave
* Multiple AC output: 4* 220V AC.
*Electricity generated per day: Approximately 3.6KWH in
sunny weather. * Electricity consumed per day: Maximum power
consumption 5.6KWH.
*Total power consumption of loads should not exceed
2400W per hour
*AC Adapter :by option.SKU: 1557 -
ARMOURED CABLE, ELECTRICAL INDUSTRIAL
35mm x 4Core Armoured Cable Coleman
Suitable for under and over-ground usage alike, 35mm 4 Core Armoured Cable is a dust and waterproof variant of electrical cable that is commonly found within powered networks and supplying mains electricity to a large variety of devices, both domestic and industrial.
This particular type of cable is constructed using Plain Annealed Stranded Copper for the conductors, XLPE (Cross-Linked Polyethylene) for the insulation, PVC (Polyvinyl Chloride) for the bedding and sheathing and Steel Wire for the armouring.
Not only does the Steel Wire Armour provide a method of mechanical protection, meaning it is suitable for installation into highly-corrosive environments, the armour also provides a form of CPC (Circuit Protective Conductor) meaning it can be used as an earth for the cable. This means that an earth core/cable is not required although it is still recommended as an extra safety measure.
No. of cores / size of cable – 4
Approx overall diameter – 18.7mm
Conductors – Plain Annealed Stranded Copper
Insulation – Cross-Linked Polyethylene (XLPE)
Bedding – PVC
Armour / Protection – Steel Wire
Sheath / Jacket – PVC
Colour – Black
Application – Primarily found within powered networks and providing mains electricity to powered devices.
Voltage Rating – 600/1000VtSKU: coleman35mm -
Electro, SOCKETS, SOCKETS & SWITCHES
Eaton MEM 13 Amp Socket
Eaton’s Moulded Accessory Range is manufactured in a robust, high quality thermoplastic. The range offers a comprehensive selection of solutions that combine reliability and durability with quick and simple installation. Designed with colour matching and aesthetics in mind, the range boasts an appealing front plate design. This enables easy side-by-side mounting of switches and sockets. Screw caps are provided to conceal fixing screws to give a clean finish.
Material: PVC Color: white. Number of gangs:2 Switches: 2-way. Amps: 13A.
SKU: 1500
There are no reviews yet.