Two gang dimmer switch in chrome the ultimate in contemporary switches. This product must be installed in accordance with local Building Regulations. If in any doubt, or where required by the law, consult a competent person who is registered with an electrical self certification scheme. Further information is available online or from your Local Authority. If in doubt consult a qualified electrician.
Vollex Twin Dimmer Chrome
Always read instructions.
₦6,000.00
CompareBased on 0 reviews
Be the first to review “Vollex Twin Dimmer Chrome”
-
CIRCUIT BREAKERS
TeSys Schneider Electric Overload Relays 23 – 32amps
3-pole relays with screw clamp terminals
These overload relays are designed for the protection of motors. They are
compensated and phase failure sensitive. Resetting can either be manual or
automatic.
Direct mounting: under the contactor for versions with screw clamp terminals only;
pre-wired terminals, see pages B11/28 and B11/30.
Separate mounting: using terminal block LA7 K0064 (see below).
On the front face of the overload relay:
b selection of reset mode: Manual (marked H) or Automatic (marked A),
b red pushbutton: Trip Test function,
b blue pushbutton: Stop and manual Reset,
b yellow trip flag indicator: overload relay tripped.
Protection by magnetic circuit breaker GV2 LE, see pages A6/11 and A6/20.SKU: Overload6 -
ELECTRICAL INDUSTRIAL, Electro, TRANSFORMER
ABB 1000KVA 33/400KV Distribution Transformer
Distribution transformers are typically oil-immersed and suitable for pole-, pad- or ground-mounting. They represent an economical option for certain networks, particularly those with low population densities.
Depending upon requirements, transformers may be connected between two phases of a three-phase system (two high voltage bushings) or from one phase to ground (single high voltage bushing).
The units are suitable for residential overhead distribution loads, as well as light commercial or industrial loads and diversified power applications.
Product scope
- Primary voltage: up to 36 kV
- Typical fluid: mineral oil
SKU: transfor1.5kva2 -
ARMOURED CABLE, ELECTRICAL INDUSTRIAL
1.5mm x 4Core Armoured Cable (Nigerchin WIRE AND CABLE)
NIGERCHIN was incorporated in 1970 as the pioneer manufacturer of electric cables and conductors in Nigeria.
A partnership with Canada Wire and Cable International (CWI), then, a Canadian company with over 75 years experience in cable designed, engineering and manufacture, gave Nigerchin relevant technology, experience and facilities for product and manpower development.
Over time, Nigerchin has built on this foundation, competency for upgrading, producing and certifying quality products that meet international requirements in the electrical power industry and installations.
1.5mm 4 Core Armoured Cable is a form of electrical cable, primarily found in electrical installations such as powered devices and networks, powering outdoor features such as lighting and jacuzzis, as well as industrial installations.
4 Core Cable contains brown, black, grey & blue coloured cores. It’s construction is commonly identified as steel for the wire armour, PVC for the outer sheathing and bedding, XLPE (Cross-Linked Polyethylene) for the insulation and plain annealed stranded copper for the cores.
As the cable contains a steel wire armour, this not only provides a form of mechanical protection, but can also be used an earth for the cable.
No. of cores / size of cable – 4
Approx overall diameter – 14mm
Approx weight (m) – 0.36 Kg
Conductors – Plain Annealed Stranded Copper
Insulation – Cross-Linked Polyethylene (XLPE)
Bedding – PVC
Armour / Protection – Steel Wire
Sheath / Jacket – PVC
Colour – Black
Application – Primarily found within powered networks and providing mains electricity to powered devices.
Voltage Rating – 600/1000VtSKU: NA1
There are no reviews yet.