Single gang two way switch in curved white the ultimate in contemporary switch design. This product must be installed in accordance with local Building Regulations. If in any doubt, or where required by the law, consult a competent person who is registered with an electrical self certification scheme. Further information is available online or from your Local Authority
White Plastic 1G 2Way Switch
. Always read instructions.
₦350.00
CompareBased on 0 reviews
Be the first to review “White Plastic 1G 2Way Switch”
-
SOLAR POWERED
Solar Power Systems 150W/36V
*solar panel: 150W/36V *2
*battery: 12V/100AH *4
*controller: 24V/15A
*inverter: 24V/600W sine wave * Multiple AC and DC output interface to achieve multiple
purposes: 1*24V DC,1*20V DC, 1*12V DC, 2*5V USB,
3* 220V AC..
*Electricity generated per day: Approximately 0.9KWH in
sunny weather. * Electricity consumed per day: Maximum power
consumption 3.6 KWH.
*Total power consumption of loads should not exceed
480W per hour
*AC Adapter : Input AC100-240V,output DC28V/8A, by
option.SKU: 1556 -
ELECTRICAL INDUSTRIAL, Electro, TRANSFORMER
ABB 200KVA 33/400KV Distribution Transformer
Distribution transformers are typically oil-immersed and suitable for pole-, pad- or ground-mounting. They represent an economical option for certain networks, particularly those with low population densities.
Depending upon requirements, transformers may be connected between two phases of a three-phase system (two high voltage bushings) or from one phase to ground (single high voltage bushing).
The units are suitable for residential overhead distribution loads, as well as light commercial or industrial loads and diversified power applications.
Product scope
- Primary voltage: up to 36 kV
- Typical fluid: mineral oil
SKU: transfor300kva3 -
CEILING LIGHTS, Electro, HOME&OFFICE LIGHTING, LIGHTING
Flush Fitting Ceiling Light Chrome Effect
This flush-fitted domed chrome frosted ceiling light takes either a GLS ES 42W halogen bulb, or a 12W energy saver, which are not included. Flush fitting ceiling light fitting. Wiring required. Maximum 1x 42W E27 GLS Halogen ES bulb or 12W energy saving bulb required. Bulb not included. Suitable for use in bathrooms excluding zone 0,1,2. For indoor use only. Always read instructions.
SKU: 1391 -
ARMOURED CABLE, ELECTRICAL INDUSTRIAL
2.5mm x 4Core Armoured Cable (Kablemetal)
2.5mm 4 Core Armoured Cable is commonly found supplying mains voltage electricity to powered devices and networks. For example, it could be used to power outdoor buildings such as garden sheds or workshops as well as garden features such as jacuzzi/hot tubs.
The cable contains a steel wire armour, meaning it provides a mechanical protection for the insulating layers underneath. This also enables the cable to have higher pulling loads, making it perfectly suitable for dispensing from a cable drum on a building site, etc.
It’s construction is commonly identified by the plain annealed stranded copper for the cores, the PVC (Polyvinyl Chloride) for the bedding and sheathing, armour made from steel wire and XLPE (Cross-Linked Polyethylene) for the insulation.
The Steel Wire can also be used as a CPC (Circuit Protective Conductor), meaning the armour can be used an earth for the cable. This means that even though the cable has an earth core, it is still protected, meaning it abides by all health and safety regulations.
No. of cores / size of cable – 4
Approx overall diameter – 15.3mm
Approx weight (m) – 0.43Kg
Conductors – Plain Annealed Stranded Copper
Insulation – Cross-Linked Polyethylene (XLPE)
Bedding – PVC
Armour / Protection – Steel Wire
Sheath / Jacket – PVC
Colour – Black
Application – Primarily found within powered networks and providing mains electricity to powered devices.
Voltage Rating: – 600/1000VtSKU: 8515
There are no reviews yet.