Fiberglass 12 ft single sided stepladder is now loaded with new advanced features. Multifunctional Holster Top PRO keeps tools organized and safe on the ladder top. A magnetic strip and hardware bins keep parts and tools easily accessible and secure. The right handed drill hammer slot and pipe channel are conveniently located for ease of use. Comfortable slip resistant steps.
12 Feet Fiberglass Ladder
ladder comes in a vertical or inclined set of rungs or steps. There are two types: rigid ladders that can be leaned against a vertical surface such as a wall, and rope ladders that are hung from the top. The vertical members of a rigid ladder are called stringers or rails (US) or stiles (UK). Rigid ladders are usually portable, but some types are permanently fixed to buildings. They are commonly made of metal, wood, or fibreglass, but they have been known to be made of tough plastic.
₦122,000.00
CompareBased on 0 reviews
Be the first to review “12 Feet Fiberglass Ladder”
-
ELECTRICAL FITTINGS, Electro, TRUNCKING
75x75mm Dignity PVC Trunking
The advantages of PVC Wire Duct:
1. Low cost, significant cost savings compared to standard traditional tray products.
2. Light in weight, wide range of sizes.
3. Fast heat dispersion.
4. Strong enough to withstand short circuits. Provides strength, rigidity without additional hardware.
5. Adapts to difficult architectural designs to accommodate changes in direction and elevation of cable runs.
6.Flexible, easy and fast installation. Design allows cable exit or entry at any point.
7. Cables can be secured to clamps or ties.
8.Various hardware accessories available to fix, support and install.
9. Safe smooth edge design to protect cable.
10.Easy for line check and cleaning , easy maintained.SKU: 413 -
-
ARMOURED CABLE, ELECTRICAL INDUSTRIAL
4mm x 4 Core S.W.A/P.V.C Armoured Cable (Nigerchin WIRE AND CABLE)
ARMOURED CABLE, ELECTRICAL INDUSTRIAL4mm x 4 Core S.W.A/P.V.C Armoured Cable (Nigerchin WIRE AND CABLE)
NIGERCHIN was incorporated in 1970 as the pioneer manufacturer of electric cables and conductors in Nigeria.
A partnership with Canada Wire and Cable International (CWI), then, a Canadian company with over 75 years experience in cable designed, engineering and manufacture, gave Nigerchin relevant technology, experience and facilities for product and manpower development.
Over time, Nigerchin has built on this foundation, competency for upgrading, producing and certifying quality products that meet international requirements in the electrical power industry and installations.
4mm 4 Core Armoured Cable is a form of electrical cable that has the ability to supply mains electrical power to devices and networks. The cable also has more domestic uses such as being used to supply mains electricity to devices such as outdoor buildings, for example, garden sheds or out-houses, as well as being suitable for outdoor lighting circuits such as patio and decking lights.
The cable construction is identified by plain annealed stranded copper being used for the conductors/cores, PVC (Polyvinyl Chloride) being used for the bedding and sheathing, cross-linked polyethylene being used for the insulation and steel wire being used for the armour.
Due to the steel wire armour that is within the cable protecting the insulating layers beneath, it is also used to give the cable higher pulling loads, meaning it can take the strain of being dispensed from cable drums when delivered to a building/construction site etc. The steel wire armour can also be used as a CPC (Circuit Protective Conductor) or ‘natural earth’ meaning that the armour itself will earth the cable.
No. of cores / size of cable – 4
Approx overall diameter – 16.4mm
Approx weight (m) – 0.54Kg
Conductors – Plain Annealed Stranded Copper
Insulation – Cross-Linked Polyethylene (XLPE)
Bedding – PVC
Armour / Protection – Steel Wire
Sheath / Jacket – PVC
Colour – Black
Application – Primarily found within powered networks and providing mains electricity to powered devices.
Voltage Rating: 600/1000VtSKU: 4mm Nigerchin -
CHANGEOVER SWITCHES, Electro, GEAR SWITCHES & CHANGEOVER
STANLEY 100A Changeover Switch
Stanley Products always provides new technology for all industrial requirements, with excellent value for their investments. You can depend upon for matchless quality on all Stanley Products. Our new range products in sheet metal Side Handle Operating Switchgear are made as per industrial requirements with powder coating. This certificate of “Stanley” original products, issued with the assurance as the same has been manufactured in accordance with requirement of IEC-60947-3 (2005-06). Quality system, standards and mechanism has been tested satisfactory to the specific test as follows: 1. Dielectric Test 2. Mechanical Operation Test 3. High Voltage Test 4. Insulation Resistance Test 5. Temperature Rise Test 6. Mini Volt Drop Test STANLEY 100A Changeover Switch
SKU: 1575 -
SOLAR POWERED
Solar LED Lamp
1. Solar Panel: 30W/18V with 6M cable
2. Solar panel bracket: yes
3. SMF Lead-Acid Battery: 12V 24Ah
4. Lamp: 4PCS super bright 3W LED lamp with 5M
cable
5. USB interface: USB output can charge formobile
phone, etc
6. Indicator: Charging indicator, Workingindicator,Low- voltage indicator.
7. Charging time: About 11-12hours (by
solar panel); about 15-17 hours (by
adapter).
8. Lighting time: 4PCS 3W LED 22-24 hours when the
battery is fully charged
9. AC Adapter: Input AC100-240V,output DC16V/2A, by
option
10. Support external inverter and support AC output
11. Match with 1* 8W/12V DC fan (optional)
12. Music playing function: with MP3,FM radio functionSKU: 1552
There are no reviews yet.