Three pin electrical plug, tested to 13a, fitted with 5a fuse. If in doubt consult a qualified electrician.
3 Pin Plug With Fuse White 5amp
Always read instructions.
₦1,500.00
CompareBased on 0 reviews
Be the first to review “3 Pin Plug With Fuse White 5amp”
-
CABLE AND CABLE MANAGEMENT, Electro, SINGLE CORE WIRE
Cutix 10mm Single Core Copper Wire
Our cables with PVC (Polyvinyl Chloride) sheathing are used in a vast number of applications from fixed wiring to flexible installations and they are available in various sizes, colours and number of conductors.
SKU: cutix10m -
ARMOURED CABLE, ELECTRICAL INDUSTRIAL
240mm x 4 Core Armoured Cable (Kabelmetel Nexans Nigeria)/Per meter
ARMOURED CABLE, ELECTRICAL INDUSTRIAL240mm x 4 Core Armoured Cable (Kabelmetel Nexans Nigeria)/Per meter
240mm 4 Core Armoured Cable is a variant of steel wire armoured cable used for industrial electrical applications as well as being suitable for direct burial to carry mains electricity to various powered devices. It is also commonly found within powered networks such as within power stations and factories, etc.
This cable is commonly identified by the following construction; plain annealed stranded copper for the cores/conductors, polyvinyl chloride for the bedding and sheathing, cross-linked polyethylene for the insulation, with a steel wire armour protecting the layers beneath.
Although this cable is suitable for powering smaller, more domestic installations such as powering an outdoor shed or house as well as garden/water features, it is most commonly found within more industrial practices, as mentioned previously.
240mm 4 Core Armoured Cable is constructed from the following materials;– Plain Annealed Stranded Copper for the cores
– Cross-Linked Polyethylene for the Insulation
– PVC (Polyvinyl Chloride) for the bedding and sheathing
– Steel Wire for the armour protecting the insulating layers beneath.
– Voltage Rating: 600/1000Vt
SKU: AC240 -
Electro, FLUORESENT TUBES, LIGHT BULBS, LIGHTING
Osram Fluorescent Tube 2ft
Product benefits: Proven lamp technology Good economy thanks to high efficiency Available in many different light colors (2,700…8,000 K) for various applications Areas of application: Public buildings Office lighting Industry Shops Supermarkets and department stores Street lighting Outdoor applications only in suitable luminaires Product features: Very good lumen maintenance: 90 % throughout the service lifetime of the lamp Good color rendering group: 1B (Ra: 80…89) Dimmable Top-quality three-band phosphor: LUMILUX
SKU: OsramFlu2 -
SOLAR POWERED
Solar Power Systems 200W/36V
*solar panel: 200W/36V
*battery: 12V/100AH *2
*controller: 24V/10A
*inverter: 24V/500W sine wave * Multiple AC and DC output interface to achieve multiple
purposes: 1*24V DC,1*20V DC, 2*12V DC, 1* 9V DC,
2*5V USB, 3* 220V AC.
*Electricity generated per day: Approximately 0.6KWH in
sunny weather. * Electricity consumed per day: Maximum power
consumption 1.8 KWH.
*Total power consumption of loads should not exceed
400W per hour *AC
Adapter : Input AC100-240V,output DC28V/8A, by
option.SKU: 1555 -
LED DRIVERS
Philips Xitanium 50W 230V LED DRIVER Philip
Eco passport – Our environmental product specifications overview
Philips cares about the environment and society at large, and strongly supports eco-design of products.Specifications
General Characteristics:
Housing – [Not Specified]
Lifetime – 50000 hr
Input Frequency – 50/60 Hz
Relative Humidity – 10 (min), 90 (max) %
IP Classification – 20
Lifetime 90% surv.@Tcaselife – 50000 hr
System Description – TD/TE [Touch&DALI/Trailing edge dimming]
Number of LEDs – xOperating Characteristics
12V output – Yes
Ripple current – 20 %
Efficiency Range – 88-90 %
Power Factor Range – 0.9
Output Power Range – 15-50 W
Power Factor (100% load) – 0.9 (min) –
Output Voltage Range – 31-62 V
Output Current Range (mA) – 300-1000
Dimming range – 100-10 %
Dimmable – Yes
Input Voltage Range (DC) – 186-250 V
Inrush Current Peak – 48 (max) A
Output Current Tolerance – -5 (min), 5 (max) %
Inrush Current Width to 50% – 180 us
Type of Dimming – Touch&DALI and trailing edge
Input Voltage Range (AC) – 220-240 V
Earth leakage current – 0.7 (max) mA
Max drivers on MCB(16A type-B) – 12 (max) x
Control input protection – Yes (Basic insulation)Wiring Characteristics
Connection on driver to L2 – JST connector
Hot wiring – Yes
Connector type input terminal – Wago 250
Connector type output terminal – Wago 250Product Dimensions
Length A1 – 140.0 mm
Width B1 – 75 mm
Height C1 – 32 mm
Fixing Hole Diameter D1 – 4.5 mm
Fixing Hole Distance Width B2 – 63.7 mm
Fixing Hole Distance Length A2 – 128.5 mmSKU: Philip Driver1
There are no reviews yet.