Each Armored cable contains high strength, good bending performance, no gel, easy to be connected and operated on with buffer design, independent strength member and sheath to prevent damage from environmental and mechanical stress. Outer jacket’s colors varies according to the types of optical fibers (indoor use), black color is recommended for outdoor use, options for other colors available upon request.
50mm x 4Core Armoured Cable (Nigerchin Wire and Cable)
50mm 4 Core Armoured Cable is a large and specific size of Armoured Cable, primarily found within large powered networks whilst also carrying power to a range of different powered devices. Although this cable can be used for domestic uses such as powering outdoor sheds and greenhouses as well as water features and outdoor lights, due to its size, it is commonly found within more industrial installations such as power stations and large construction sites.
The cable is constructed itself from the following; Plain Annealed Stranded Copper for the cores/conductors, XLPE (Cross-Linked Polyethylene) for the insulation, PVC (Polyvinyl Chloride) for the bedding and sheathing & steel wire for the armour protecting the layers beneath.
The steel wire armour within the cable also provides a mechanical protection, therefore it enables the cable higher pulling loads, which is useful for when the cable is being dispensed from a large drum.
No. of cores / size of cable – 4
Approx overall diameter – 31.3mm
Approx weight (m) – 2.95Kg
Conductors – Plain Annealed Stranded Copper
Insulation – Cross-Linked Polyethylene
Bedding – Polyvinyl Chloride
Armour / Protection – Steel wire
Sheath / Jacket – Polyvinyl Chloride
Colour – Black
Application – Used primarily within large powered networks supplying mains electricity to multiple devices.
Voltage Rating: 600/1000Vt
₦36,691.00
CompareBased on 0 reviews
Be the first to review “50mm x 4Core Armoured Cable (Nigerchin Wire and Cable)”
-
Electro, INDOOR LIGHTS, LED DRIVERS, LED LIGHTS, LIGHTING
Kingsun LED 5ft LED Tube Light 23watt without Choke – 2years Warranty
Electro, INDOOR LIGHTS, LED DRIVERS, LED LIGHTS, LIGHTINGKingsun LED 5ft LED Tube Light 23watt without Choke – 2years Warranty
– Length: (5feet) – Total system consumption: 23W – Input Voltage: AC100-277V – CCT: 6000K – Output Lumen: 2300lm – Lamp Base: G13 – Work without external ballast – No RF interference – Warranty: 2 years – Single end electricity & high safety – Instant soft-start
SKU: ledtube 5ft -
SOLAR POWERED
Solar Power Systems 280W/36V
*solar panel: 280W/36V *2
*battery: 12V/100AH *2
*controller: 48V/40A
*inverter: 48V/1500W sine wave
* Multiple AC output: 4* 220V AC.
*Electricity generated per day: Approximately 3.6KWH in
sunny weather. * Electricity consumed per day: Maximum power
consumption 5.6KWH.
*Total power consumption of loads should not exceed
2400W per hour
*AC Adapter :by option.SKU: 1557 -
Electro, SOCKETS, SOCKETS & SWITCHES
Eaton-MEM 13 Amp Single Switched Socket
Eaton’s Moulded Accessory Range is manufactured in a robust, high quality thermoplastic. The range offers a comprehensive selection of solutions that combine reliability and durability with quick and simple installation. Designed with colour matching and aesthetics in mind, the range boasts an appealing front plate design. This enables easy side-by-side mounting of switches and sockets. Screw caps are provided to conceal fixing screws to give a clean finish.
Material: PVC Color: white. Number of gangs:1 Socket: 3 pin plug Amps: 13A. Power Voltage Supply:240V
SKU: 1501 -
CIRCUIT BREAKERS
TeSys Schneider Electric Overload Relays 1.6 – 2.5amps
3-pole relays with screw clamp terminals
These overload relays are designed for the protection of motors. They are
compensated and phase failure sensitive. Resetting can either be manual or
automatic.
Direct mounting: under the contactor for versions with screw clamp terminals only;
pre-wired terminals, see pages B11/28 and B11/30.
Separate mounting: using terminal block LA7 K0064 (see below).
On the front face of the overload relay:
b selection of reset mode: Manual (marked H) or Automatic (marked A),
b red pushbutton: Trip Test function,
b blue pushbutton: Stop and manual Reset,
b yellow trip flag indicator: overload relay tripped.
Protection by magnetic circuit breaker GV2 LE, see pages A6/11 and A6/20.SKU: Overload3
There are no reviews yet.