Each Armored cable contains high strength, good bending performance, no gel, easy to be connected and operated on with buffer design, independent strength member and sheath to prevent damage from environmental and mechanical stress. Outer jacket’s colors varies according to the types of optical fibers (indoor use), black color is recommended for outdoor use, options for other colors available upon request.
70mm x 4Core Amroured Cable (Nigerchin Cable and Wire)
70mm 4 Core Armoured Cable is a size and type of steel wire armoured cable. Primarily found in large powered networks and underneath roadways supplying mains electricity to large buildings. It can also be found within the transport industry, specifically railways powering the trains and buildings located beside the tracks. Due to the size of this cable, it is perfectly suitable for large amounts of power running through it on a daily basis, 24 hours a day.
The best solution to this issue would be to buy a length of earth cable that matches the length of the Armoured Cable. This would negate the steel wire from being used as an earth, meaning it is a safer alternative.
70mm 4 Core Armoured Cable is constructed from the following materials;
– Plain Annealed Stranded Copper for the cores
– Cross-Linked Polyethylene for the Insulation
– PVC (Polyvinyl Chloride) for the bedding and sheathing
– Steel Wire for the armour protecting the insulating layers beneath.
No. of cores / size of cable – 4
Approx overall diameter – 36.8mm
Approx weight (m) – 4.23Kg
Conductors – Plain Annealed Stranded Copper
Insulation – Cross-Linked Polyethylene
Bedding – Polyvinyl Chloride
Armour / Protection – Steel Wire
Sheath / Jacket – Polyvinyl Chloride
Colour – Black
Application – Primarily found in large powered networks as well as buried underneath roads supplying mains electricity to large buildings etc.
Voltage Rating – 600/1000Vt
₦76,500.00
CompareBased on 0 reviews
Be the first to review “70mm x 4Core Amroured Cable (Nigerchin Cable and Wire)”
-
SOLAR POWERED
Solar Power Systems 100W/18V
*solar panel: 100W/18V
*battery: 12V/100AH
*controller: 12V/15A
*inverter: 12V/300W sine wave * Multiple AC and DC output interface to achieve multiple
purposes: 1*20V DC, 1*12V DC, 1* 9V DC, 1*3.3V DC,
4*5V USB, 2* 220V AC.
*Electricity generated per day: Approximately 0.3KWH in
sunny weather. * Electricity consumed per day: Maximum power
consumption 0.95 KWH.
*Total power consumption of loads should not exceed
200W per hour *AC
Adapter : Input AC100-240V,output DC16V/3-4A, by
option.SKU: 1554 -
Electro, SOCKETS, SOCKETS & SWITCHES
Bg Nexus Screwless 13Amp 2 Gang Switched Socket With 3.1A USB Chargers Brushed Steel With Grey Insert NBS22U3G
Electro, SOCKETS, SOCKETS & SWITCHESBg Nexus Screwless 13Amp 2 Gang Switched Socket With 3.1A USB Chargers Brushed Steel With Grey Insert NBS22U3G
BG Nexus Screwless Flatplate 13Amp 2 Gang Double Pole Switched Socket with 2 USB Sockets can be used as a direct replacement for existing wall sockets or as part of a new installation
Key Features
2 x Type A USB sockets – 3.1Amp output, 5V
Screwless front plate
Twin earth fitted as standard to allow a double earth facility for installations requiring high integrity protective connection
Simple to clip on/off
Integral plastic gasket to protect metal from moisture
Angled in-line colour coded captive terminals
Less than 5mm thickTechnical
Terminal capacity: 3 x 2.5mm²; 2 x 4mm² and 1 x 6mm²
Minimum mounting box depth: 25mmColour – Steel
Finish – Brushed Steel
Range – Nexus Flatplate
Unit Of Sale – Each
Weight – 0.1Kg
Brand – BG Nexus
EDP code – FBS22U3G
Screwed / Screwless – Screwless
Insert Colour – Grey
Number of Gangs – 2 Gang
Pole Type – Single Pole
Amps – 13ASKU: NBS22U3G -
ELECTRICAL FITTINGS, Electro, TRUNCKING
25x40mm Dignity PVC Trunking
The advantages of PVC Wire Duct:
1. Low cost, significant cost savings compared to standard traditional tray products.
2. Light in weight, wide range of sizes.
3. Fast heat dispersion.
4. Strong enough to withstand short circuits. Provides strength, rigidity without additional hardware.
5. Adapts to difficult architectural designs to accommodate changes in direction and elevation of cable runs.
6.Flexible, easy and fast installation. Design allows cable exit or entry at any point.
7. Cables can be secured to clamps or ties.
8.Various hardware accessories available to fix, support and install.
9. Safe smooth edge design to protect cable.
10.Easy for line check and cleaning , easy maintained.SKU: 409 -
ARMOURED CABLE, ELECTRICAL INDUSTRIAL
240mm x 4 Core Armoured Cable (Nigerchin Cable and Wire)
240mm 4 Core Armoured Cable is a variant of steel wire armoured cable used for industrial electrical applications as well as being suitable for direct burial to carry mains electricity to various powered devices. It is also commonly found within powered networks such as within power stations and factories, etc.
This cable is commonly identified by the following construction; plain annealed stranded copper for the cores/conductors, polyvinyl chloride for the bedding and sheathing, cross-linked polyethylene for the insulation, with a steel wire armour protecting the layers beneath.
Although this cable is suitable for powering smaller, more domestic installations such as powering an outdoor shed or house as well as garden/water features, it is most commonly found within more industrial practices, as mentioned previously.
240mm 4 Core Armoured Cable is constructed from the following materials;– Plain Annealed Stranded Copper for the cores
– Cross-Linked Polyethylene for the Insulation
– PVC (Polyvinyl Chloride) for the bedding and sheathing
– Steel Wire for the armour protecting the insulating layers beneath.
– Voltage Rating: 600/1000Vt
SKU: 240mmnigerchin2
There are no reviews yet.