ABB’s change-over and transfer switches are designed to transfer loads from one power source to another in a wide variety of applications. The range includes switches from 16 to 3200 Amperes, which can be operated manually, remotely by using a motor or automatically. The most compact solution With an advanced and compact design, ABB’s change-over and transfer switches can be installed in confined spaces Superior performance: ABB’s change-over and transfer switches are tested according to IEC 60947-6-1 and IEC 60947-3 standards. The switches have ratings in AC31 and AC33 utilization categories, up to 415 V. In motorized switches, the motor operators have a wide voltage operation range Suitable for your application Safe operation: Service continuity is ensured with a number of built-in, integrated safety features. For instance, the change-over mechanism has stable positions shown reliably. Unwanted manual and remote operation can be prevented. Manual operation is always possible in emergency situations.
ABB Gear Switch 125A TPN
With ABB’s change-over switches, people and equipment are safe
Easy and flexible installation
Depending on the size, the switch can be mounted in different positions, on the panel door or DIN rail. Snap-on accessories and connections are available.
• IP65 rated (not suitable for external installation) Steel Enclosure
• Powder coated textured finish (RAL 7035)
• All switches are supplied with fuses and removable gland plates
• All 3 pole switches include detachable neutral link (OT160 solid link)
• Hinged lid complete with lock
• Switch Fuses are internally rated IP20 on incoming terminals up to 63A
• Pad lockable pistol grip handle as standard • Switch Fuses 100A are supplied with incoming terminal shrouds not fitted to allow customer connections
₦0.00
CompareBased on 0 reviews
Be the first to review “ABB Gear Switch 125A TPN”
-
Electro, FLUORESENT TUBES, LIGHT BULBS, LIGHTING
Philips Fluorescent Tube 36w 4ft Tube
Philips Fluorescent tubes offer long life and quality, energy efficient task lighting in a broad range of colors and sizes to fit almost any lighting need. Philips innovation has reduced the mercury level without sacrificing life or performance. Average life: 10000 hours Base: G13 2 pin Shape: linear Length: 600mm Wattage: 36 watt Lamp type: T8 Energy label: A Lumens: 1350 Colour temperature: 4000K Colour appearance: cool daylight Triphosphor tubes for high quality tubes
SKU: 146 -
ELECTRICAL FITTINGS, Electro, TRUNCKING
50x50mm Dignity PVC Trunking
The advantages of PVC Wire Duct:
1. Low cost, significant cost savings compared to standard traditional tray products.
2. Light in weight, wide range of sizes.
3. Fast heat dispersion.
4. Strong enough to withstand short circuits. Provides strength, rigidity without additional hardware.
5. Adapts to difficult architectural designs to accommodate changes in direction and elevation of cable runs.
6.Flexible, easy and fast installation. Design allows cable exit or entry at any point.
7. Cables can be secured to clamps or ties.
8.Various hardware accessories available to fix, support and install.
9. Safe smooth edge design to protect cable.
10.Easy for line check and cleaning , easy maintained.SKU: 411 -
Electro, GEAR SWITCHES, GEAR SWITCHES & CHANGEOVER
Stanley SwitchGear – Side Handle 300Amp
Stanley Products always provides new technology for all industrial requirements, with excellent value for their investments. You can depend upon for matchless quality on all Stanley Products. Our new range products in sheet metal Side Handle Operating Switchgear are made as per industrial requirements with powder coating. This certificate of “Stanley” original products, issued with the assurance as the same has been manufactured in accordance with requirement of IEC-60947-3 (2005-06). Quality system, standards and mechanism has been tested satisfactory to the specific test as follows: 1. Dielectric Test 2. Mechanical Operation Test 3. High Voltage Test 4. Insulation Resistance Test 5. Temperature Rise Test 6. Mini Volt Drop Test STANLEY 200A Gear Switch
SKU: StanleyGear4 -
ELECTRICAL FITTINGS, Electro, MODULAR FITTING
4x36W 600×600 Recessed Modular Prismatic
Modular Fitting has an extremely small recess depth 53mm which makes it perfect for shallow ceiling voids. It is also suitable for lay in suspended grid ceilings and comes complete with wire retention safety cable. Rapid installation and maintenance are further facilitated by a quick release louvre device, which is particularly useful during potentially disruptive lamp changes. Ivy Classic is also supplied with a peel off protective cover, to keep the luminaire bright, clean and dust free during carriage and installation.
Once in place, Modular Fitting offers bright, glare free lighting courtesy of its brilliant aluminum louvre and either its 4 x 14W or 3 x 14W T5 lamps. This efficient combination of source and reflector offers a high light output ratio (LOR) of up to 78% and more.
SKU: 057
There are no reviews yet.